ecler MIMO88 Digital Built In Audio Matrix User Manual
- June 5, 2024
- ecler
Table of Contents
ecler MIMO88 Digital Built In Audio Matrix
Specifications
- Model: MIMO88
- Type: Digital Matrix Embedded Audio Matrix
- Sampling Rate: DSP
- Latency: IN to OUT Converters
- Resolution: Dynamic Range Analogue 8+8 Input/Output
- Headphones Frequency Response: -3dB
- THD+Noise @ 1kHz, 0dBV input (line): Low
- Interchannel Crosstalk (20Hz – 20kHz): Minimal
Product Usage Instructions
Installation
Follow the provided wiring diagram for proper installation. Ensure correct connections of hot, cold, and ground terminals.
Network Configuration
Default network parameters are pre-set and can be found in the EclerNet Manager Application Manual on the manufacturer’s website.
Power Connection
Connect the positive terminal to +12 VDC, negative terminal to ground, and variable voltage terminal to 0-12 VDC as required.
RS-232 Interface
For remote control, use the RS-232 interface with fixed baud rate, data bits, parity, stop bits, and flow control settings.
Cleaning
Keep the device clean by wiping with a soft, dry cloth. Avoid using any liquid or abrasive cleaners.
FAQs
- Q: How do I reset the device to factory settings?
- A: To reset to factory settings, refer to the user manual for specific instructions on the reset process.
- Q: Can I connect multiple audio sources simultaneously?
- A: Yes, the device supports multiple audio inputs and outputs for simultaneous connections.
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>