HILTI MT-B-LDP S Load Distribution Plate Instructions
- June 3, 2024
- HILTI
Table of Contents
HILTI MT-B-LDP S Load Distribution Plate
Applications
- Installing ventilation ducts, pipework, and cable trays on flat roofs
- Suitable for use in outdoor environments
Technical data
- Material composition Aluminium, EPDM rubber
Advantages
- Part of the Hilti MT system – an economical, all-in-one solution for rooftop ventilation and other modular support systems
- Easy to install – compatible with the Hilti MT Twist-Lock, MQM, and MRN Channel Nut, a faster alternative to spring nuts for assembling a modular support system
- Easier to handle and transport compared to pre-fabricated welded steel
- Includes a non-slip anti-vibration mat
- Suitable for outdoor applications, with features such as aluminum feet for better weather resistance
Order Designation| Material thickness| Weight| | Available
in| Packed to| Item number
---|---|---|---|---|---|---
MT-B-LDP S| 2.75 mm| 280 g| | A, CH, D,
NL, PL
| 2 pcs| 2320182
Recommended Loads
Load-value drawing| +Fx 1)
[kN]
| – Fx 1)
[kN]
| +Fy 2)
[kN]
| – Fy 2)
[kN]
| +Fz
[kN]
| -Fz 3)
[kN]
---|---|---|---|---|---|---
| 2,98| 2,98| 1,79| 1,79| Not Decisive| 7,23
Mx 4) [kN cm]| My 4) [kN cm]| Mz 4) [kN
cm]| | |
Not Decisive| Not Decisive| Not Decisive| | |
Note: + = in direction of the arrow; – = against the direction of the arrow (please refer to the drawing above)
- Doesn’t include any information about the roof assembly. Please refer to the HILTI Engineering Service to assess the load limit of load distribution plates in combination with your roof assembly.
- Limited to the lateral load resistance of the wing nut. For validation, please contact your Hilti Engineering Service.
- The load resistance of the substrate must be validated separately.
- The chargeable torque is limited by the connection assembly and the load-bearing substrate.
- The connection to the load distribution plates accounts for Twistlock, MRN, and MQZ-L but not the load limits of the substrate.
- The surface area amounts to 200 cm2. For design loads please multiply by 1.4
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>