Anker PowerWave 4-in-1 Charging Stand User Manual

: June 2, 2024
: Anker

Table of Contents

LED Status
Important Safety Instructions
- FCC Statement
Radiation Exposure Statement
IC Statement
Specifications
Declaration of Conformity
Customer Service
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL

LED Status

LED Indicator Table

You cannot charge your device wirelessly in these scenarios: Using a case with a magnetic/iron plate;
Using a case with a pop socket;
Using an ultra-thick (> 5 mm) protective phone case.
Do not place any foreign objects between your device and the
wireless charger’s surface, including metal pads on a car mount,
credit cards, door keys, coins, metal, or NFC cards, which will
make wireless charging fail or cause overheating.
Wireless chargers make charging more convenient than wired
chargers, but confined by current wireless technology, their
charging speed is slower than that of wired chargers.
High temperatures will reduce charging speed and restrict power,
which is a phenomenon common to all wireless chargers. It is
recommended that you charge your device in environments with
temperatures below 25°C / 77°F.
Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the
charging speed will be.

Important Safety Instructions

Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature during use of this product must not exceed 40°C.
Open flame sources, such as candles, must not be placed on this product.
Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body.

Product Name: PowerWave 4-in-1 Stand
Model: A2575
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions.

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Specifications

PowerWave 4-in-1 Charging Stand Specifications

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2575 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/

Indoor use only.

Not Treated as household waste This symbol indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment.

Customer Service

24-month limited warranty.

Lifetime technical support.

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.