Anker Eufy Indoor Pan/Tilt Security Camera T8410 User Manual

USER MANUAL

Eufy Indoor Cam 2K Pan & Tilt (Model: T8410)

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

WHAT’S INCLUDED

• eufy Indoor Cam 2K Pan & Tilt × 1
• Model: T8410
• Mounting Plate × 1
• USB Cable × 1
• USB Adapter × 1
• Mounting Screw Pack × 1
• User Manual × 1

PRODUCT OVERVIEW

eufy Indoor Cam 2K Pan & Tilt

1. Lens
2. Microphone
3. SD card slot
4. Status LED
5. Speaker
6. Power input
7. SYNC button

SETTING UP THE SYSTEM

• Download the eufy Security app from the App Store
  (iOS devices) or Google Play (Android devices).

• Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the Indoor Cam Pan 2K to your system.
• Follow the on-screen instructions to complete the setup.

LED Status

MOUNTING THE INDOOR CAM

Select a Location for Mounting

• The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.

• Disconnect the Indoor Cam from the power outlet before mounting.
• Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.

Mount the Indoor Camera

To mount the eufy Indoor Cam on the ceiling, follow the steps below:

• Place the positioning card against the ceiling and then mark the points at which drilling will be required.

• Drill holes with a 5/16” (8 mm) drill bit.

• Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillipshead screwdriver to fasten the mounting plate to the ceiling.

• Align the grooves with the mounting plate and rotate the eufy Indoor Cam clockwise until it clicks into place.

• To mount the eufy Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below.

POWERING ON THE INDOOR CAM

Connect the eufy Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the eufy Indoor Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue.
Rotate the eufy Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. You are now all set to use your eufy Indoor Cam.

Tip:

For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973

This product complies with the radio interference
requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the Web site: https://www.eufylife.com/

This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The adapter shall be installed near the equipment and shall be easily accessible.

Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.

The suitable temperature for T8410 and accessories is 0°C-40°C. When charging, please place the device in an environment that has a normal room temperature and good ventilation.

It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.

Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the device and the guarantee article.

This charger is for indoor use only.
The charger type is TEKA012-0502000EU , output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Wi-Fi Operating Frequency Range:2412~2472MHz ; Wi-Fi Max
Output Power:19dBm
Bluetooth Operating Frequency Range:2402~2480MHz; Bluetooth
Max Output Power:8dBm(EIRP)

The following importer is the responsible party (contact for EU
matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

CUSTOMER SERVICE

• Warranty
  12-month Limited Warranty

• Call Us
  United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
  United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
  Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

• Email Us
  Customer Support: support@eufylife.com

Anker Innovations Limited
Room 1318-19,Hollywood Plaza,610 Nathan
Road, Mongkok, Kowloon, Hong Kong

Anker-Eufy-Indoor-PanTilt-Security-Camera-T8410-Manual- Optimized.pdf

Anker-Eufy-Indoor-PanTilt-Security-Camera-T8410-Manual- Orginal.pdf

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>