Ooma Motion Sensor Setup Guide
- June 2, 2024
- Ooma
Table of Contents
ooma motion sensor
Key Features
Status indicator light (hidden)
Motion sensor lens
Standing attachment
Pairing button
Tamper sensor
Battery door
Magnetic mounting plate
Step 1: Install the App
To get started, download and install the Ooma Home Monitoring app on your
iOS or Android device. The app can be found at:
ooma.com/app
When the app is installed, log in using your Ooma phone number and My Ooma
password. If you forgot your password , reset it at:
my.ooma.com Complete the initial setup in the app
Step 2: Pair Your Sensor
For the best pairing performance, hold your sensor within 10 feet of your
Telo.
In the mobile app, press the “Add Sensor” button on the
Dashboard. Select the type of sensor you would like to pair.
Follow the instructions on your screen to pair your sensor.
Step 3: Mount Your Sensor
If you are using the included adhesive pads to mount your sensor, use a damp
cloth to wipe the surface where you are placing your sensor.
Use the included adhesive pads or screws to mount the sensor within range of the desired area.
If desired, the motion sensor may be mounted in a 90˚ corner using these four screw mounts.
The included Standing attachment can be used to install the motion sensor on any flat surface without adhesive pads or screws.
Additional Information
First time setup
After installing batteries for the first time, initial setup lasts 30 secs. Status indicator blinks red until complete.
Starting pairing mode
Press and hold pairing button for five seconds to start pairing mode. Status indicator quickly blinks green while in this mode.
Status indicator reference
First time setup
Quick red flashes
Pairing mode
Quick green flashes
Pairing success
Long green flash
Unpairing success
Slow red flashes
Motion sensed
Quick red flash
Signal disconnected
Long red flash
Need Help?
Support articles
www.ooma.com/support
User manuals
www.ooma.com/userguide
Community forum
forums.ooma.com
Live customer care
1-888-711-6662 (US)
1-866-929-5552 (Canada)
Legal
For warranty , safety , and other legal information , visit ooma.com/legal
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Ooma Motion Sensor Setup Guide – Optimized PDF
Ooma Motion Sensor Setup Guide – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>