tp-link P110 Mini Smart Wi-Fi Plug Energy Monitoring User Guide
- May 15, 2024
- tp-link
Table of Contents
tp-link P110 Mini Smart Wi-Fi Plug Energy Monitoring
Specifications
- Model : Mini Smart Wi-Fi Plug with Energy Monitoring
- Supported Load Types for US Version:
- General use/Resistive : 100-125V, 50/60Hz, 15A
- Motor load : 100-125V, 50/60Hz, 1/6HP (4.4FLA/26.4LRA)
- Incandescent: 100-125V, 50/60Hz, 8A
- FCC Compliance : Part 15
Product Usage Instructions
Getting Started:
- Download the Tapo app from the App Store or Google Play.
- Follow the in-app instructions to complete the setup process.
How to Reset the Plug:
- To reset Wi-Fi while keeping previous settings, press and hold the plug for 5 seconds.
- To factory reset the plug, press and hold for 10 seconds.
FAQ
- Q: Where can I get technical support for the Mini Smart Wi-Fi Plug?
- A : For technical support, user guides, and additional information, please visit https://www.tapo.com/support/
- Q: What are the supported load types for the US version of the Mini Smart Wi-Fi Plug?
- A : The supported load types for the US version include general/resistive, motor load, and incandescent as specified in the product manual.
Quick Start Guide
Mini Smart Wi-Fi Plug, Energy Monitoring
Getting Started
- Get the Tapo app from the App Store or Google Play.
- Follow the instructions in the Tapo app to complete the setup.
How to reset the plug?
Supported Load Types for US Version:
- 100-125V, 50/60Hz, 15A, General use/Resistive
- 100-125V, 50/60Hz, 1/6HP, (4.4FLA/26.4LRA), Motor load
- 100-125V, 50/60Hz, 8A, Incandescent
- This device complies with part 15 of the FCC Rules.
- Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please keep this instruction manual.
This is a portable direct plug-in device. Plug the device into a suitable outlet. This device is intended for indoor use only. Keep the device away from heat sources and enclosed spaces with poor ventilation.
Purpose of control : this is operating control. Operating control, Type
1.B action
Impulse voltage : 1500V
Pollution degree 2 NEMA Type 1 Enclosure Operation temperature: 0~40°C (32~104°F)
Support
For technical support, the user guide and other information, please visit
https://www.tapo.com/support
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
-
This device may not cause harmful interference.
-
This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.- Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.