Chelsea Storage Bed Assembly Instruction Manual

Instruction Manual

Important Safety Instructions:

• Please read all instructions carefully before assembling this Storage Bed.

• For your safety, assembly by two or more adults is strongly recommended.

• Keep these instructions for future use.

• Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the structural integrity of the item.
  Pre-assembly:

• Remove all parts and hardware from the box. Place them on a carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.

• To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the shipping carton until assembly is complete.

• Use the parts and hardware lists below to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and
  split the wood.

Parts Included:
(A) Headboard Left Post (1x)
(B) Headboard Right Post (1x)
(C) Headboard Panel (1x)
(D) Headboard Rail (1x)
(E) Footboard (1x)
(F) Storage (2x)
(G) Center Panel (4x)
(H) Leg (4x)

Hardware Included:

Tools Required (not included):

Philips Head Screwdriver

Assembly Instruction Steps:

1. Place all parts on a soft, scratch-free surface such as a rug or carpet.
2. Determine the desired location of the bed and prepare all parts at this location before beginning assembly.
3. Attach Headboard Panel (C) and Headboard Rail (D) to Headboard Post (A&B) by inserting 10 sets of: Half Moon Washer (J), Spring Washer (N), and Long Bolt (L), as seen in the illustration below
4. Tighten with Allen Key (O).
5. Attach 1 Leg (H) to each Headboard Post (A&B) and turn clockwise until they are tight.

6. Attach 2 Legs (H) to the Footboard (E) and turn clockwise until tight, as seen in the     illustration below.

7. Attach 3 Leveler Brackets (P) to the bottom of each Storage (F) by inserting 6 Short Bolts (K), as seen in the illustration below.
8. Tighten with Allen Key (O).
9. Insert 3 Levelers (Q) through the Leveler Brackets (P) and to the pre- drilled holes on the bottom of each Storage (F), as seen in the illustration below
10. Turn the Levelers (Q) clockwise.

11. Secure Storage (F) to the Headboard (from Step #4) and Footboard (from Step #5) by aligning the pre-fixed wooden dowels at the 2 ends of Storage (F), to the pre-drilled holes on the post of the Headboard and Footboard.
12. Insert 8 sets of: Long Bolt (L), Spring Washer (N), and Flat Washer (M) to secure the Storages to the Headboard and Footboard, as seen in the illustration below.
13. Tighten with Allen Key (O).

14. Put the Center Panel (G) on the opening space between the 2 Storages (F), as seen in the illustration below.
15. Using a Philips Head Screwdriver (not included), secure the Center Panel (G) with 24 Screws (I).

16. To adjust the Levelers (Q), remove the side drawers in the Storages (F) by pulling them straight out.

17. Adjust the Levelers (Q) with a Philips Head Screwdriver (Not Included), as seen in the illustration below.

18. Put the drawers back into Storage (F).

Care Instructions:

• Dust often using a clean, soft, dry, and lint-free cloth.
• Blot spills immediately and wipe with a clean, damp cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
• Hardware may loosen over time. Periodically check to make sure all connections are tight.
  Re-tighten if necessary.

Chelsea Storage BedManual Optimized

Chelsea Storage BedManual Original

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>