Ultimate Jam Bluetooth Speaker BT-132 User Manual

: June 2, 2024
: PB Teen

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
WARNING
Battery Warning Statement:
FCC
INTRODUCTION
Box Contents
PRODUCT OVERVIEW
- Top
- Bottom
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2810 ULTIMATE JAM BLUETOOTH® SPEAKER

Please read and understand all safety instructions before use.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kinyo Company is under license.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water or moisture.
Clean only with a dry cloth.
Do not block any ventilation openings.
Installing accordance with the manufacturer’s instructions.
Do not push objects into apparatus vents or slots because fire or electric shock hazards could result.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers，table cloth，curtains，etc.
Do not install near any heat sources as radiators，heat registers stoves，or other apparatus (including amplifiers) that produce heat.
Place apparatus in a stable location so it will not fall causing product damage or bodily harm.
Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wider blade is provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
The apparatus shall be disconnected from the mains by placing the power/standby switch in the standby position and unplugging the power cord of the apparatus from the main AC outlet.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
To prevent risk of fire or electric shock，avoid overloading wall outlets and extension cord.
Use the proper power source as described in the instructions or as marked on the product.
Refer all servicing to qualified service personnel．Servicing is required when the apparatus has been damaged in any way，such as power-supply cord or pluq is damaged; liquid has been spilled or objects have fallen into the apparatus，the apparatus has been exposed to rain or moisture，does not operate normally，or has been dropped.

WARNING

TO PREVENT THE RISK OF ELECTRlC SHOCK，DO NOT REMOVE COVER(OR BACK)．NO USER SERVICEABLE PARTS INSIDE．REFER SERVICING TO QUALIFIED SERVICE PERSONNEL．TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE．THE UNIT SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES，SHALL BE PLACED ON UNIT.

ENVIRONMENTAL PROTECTION RECOMMENDATION: At the end of its working life，this product should not be disposed of with standard household Waste，but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment(WEEE)for recycling． This confirmed by the symbol found on the product, user manual or packaging．

Battery Warning Statement:

Do not mix old and new batteries (replace all batteries at the same time).
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries

FCC

The speaker complies with FCC RF radiation exposure limits set forth for general population.
The system must not be collocated or operating in conjunction with any other antennas or transmitters.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

INTRODUCTION

The Ultimate Jam Bluetooth® Speaker is compliant with Bluetooth version 3.0.The system supports Bluetooth A2DP1 , AVRCP2 , Headset and Hands-free profiles. The system is capable of streaming music from mobile phones, MP3 players, portable media players, PDA’s, computers and other audio devices with Bluetooth A2DP enabled. This system operates wirelessly from audio sources up to 33 feet (10 meters) away open space. The built-in microphone, enables to easily answer phone calls hands-free through the system. The system also comes with an auxiliary input that will connect all line in audio sources.

The playback and its plug-in Bluetooth adapter/transmitter/device needs to support A2DP (Advanced Audio Distribution Profile).
The playback and its plug-in Bluetooth adapter/transmitter/device needs support AVRCP (Audio/Video Remote Control Profile).

Box Contents

PRODUCT OVERVIEW

Top

Bottom

ON/OFF Switch
a) : Slide switch to the right for Bluetooth operation. (The speaker attempts to connect to the last paired device. See pairing instructions on)
b) OFF: Slide switch to the middle to turn the system off.
c) AUX: Slide switch to the left for Auxiliary input.
BLUETOOTH PAIRING LED Indicator / Low Battery Indicator:
a) BLUEOOTH PAIRING LED Indicator:
The Bluetooth LED will flash blue and red Iight alternately to indicate that the Bluetooth speaker enters pairing mode. When the Bluetooth device has successfully paired and connected with the Bluetooth speaker. The Bluetooth LED will flash blue light constantly. lf the Bluetooth connection is disconnected, the blue LED will flash three times to indicate the Bluetooth signal is disconnected.
b) Low Battery Indicator: Red LED Indicator will flash when battery is low. (only during Bluetooth operation)
: Press to play the previous selection. (only during Bluetooth operation)
: Press to play the next selection. (only during Bluetooth operation)
: PAlRlNG / PLAY / PAUSE / CALL (only during Bluetooth operation)
a)PAIRING: Press and hold for 3 seconds to set the speaker to discoverable mode and allow pairing with another Bluetooth device. The Bluetooth LED will flash blue light three times. Release the button and the Bluetooth LED will then flash blue and red lights alternately to indicate that the speaker is in Bluetooth pairing mode. Please see detailed pairing instructions on PAGE 5.
Note: lf the pairing process cannot be completed within 90 seconds, the blue and red Bluetooth LED will stop flashing and the Bluetooth pairing process will automatically terminate. Please repeat the pairing instructions to pair up the Bluetooth speaker with the Bluetooth enabled device.
b)ANSWERlNG / ENDlNG CALLS: To answer press the button to pick up the call. Press again to end the call.
c) PLAY / PAUSE: Press “ ” button to play the selection, press again to pause.
VOL-: Press to decrease the volume.
VOL+: Press to increase the volume.
: The Built-in Microphone is located on the bottom of the system.
Note: Make sure your Bluetooth enabled device is connected with the Bluetooth speaker. When the phone ring on your Bluetooth enabled phone, you can answer directly from your phone or press the “ ” button to answer the call. You will be able to talk hands-free through the microphone.