JBL EVEREST ELITE 750NC Manual

June 2, 2024
JBL

JBL EVEREST ELITE 750NC Manual

1. What’s in the box
Everest Elite 750NC

Everest Elite 750NC

Charging cable

Charging cable

Detachable audio cable with remote

Audio cable with remote

Warranty card, Warning card, Safety sheet, QSG, Flight adapter,

Carrying case

2. Overview
  1. Buttons & LEDs
    Buttons & LEDs

  2. Connections
    Connections

3. Bluetooth ® Connection
  1. Turn on the headphone
    Turn on the headphone

  2. If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on

  3. Connect to bluetooth device

4. Smart Button Function
  1. Adaptive Noise Cancelling

    • ANC function turns on, when headphones is powered-on through sliding button
      Adaptive Noise Cancelling
  2. Ambient Awareness
    Press the smart button to select (1) ANC on, (2) Ambient awareness low or (3) Ambient awareness high
    Ambient Awareness

  3. TruNote Auto Calibration
    TruNote Auto Calibration

To turn on the TruNote auto calibration (make sure ANC mode on)

  1. User must wear headphone on the head to correctly calibrate.
  2. Press and hold the Smart button until the sweeping tone is heard.
  3. Wait for a few seconds until the complete tone is heard.
    TruNote auto calibration completes.
5. Music control

Music control

6. Phone call
7. LED behavior

LED behavior

Download My JBL Headphones APP

Get even more control and personalization of your listening experience with this free App.

9. Battery Saving Tips

Plug in the audio cable, and this will disconnect the Bluetooth connection. You can still use ANC function if the headphone has remaining battery.

If the headphone is running out of battery, you can simply plug in the audio cable to listen to your music.

Specifications
  • Driver size: 40mm
  • Dynamic frequency response range: 10Hz-22kHz
  • Driver sensitivity: 92dB@1kHz, 1mW
  • Maximum SPL: 104dB
  • Microphone sensitivity @1kHz dB v/pa: -42
  • Impedance: 16ohm
  • Bluetooth Max Output Power: 4dBm
  • Bluetooth profiles: HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
  • Bluetooth version: V4.0
  • Bluetooth transmitted modulation: GFSK, π/4-DQPSK, 8DPSK,
  • Bluetooth frequency: 2.402GHz-2.48GHz
  • Battery type: Polymer Li-ion Battery (3.7V, 850mAh)
  • Charging time: 3 hours
  • Music play time with ANC on and Bluetooth on: up to 15 hours
  • Music play time with ANC off and Bluetooth on: up to 20 hours
  • Weight (g): 280g

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Made For IPOD, iPhone, iPad
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. In Japan, the trademark “iPhone” is used with a license from Aiphone K.K.

JBL EVEREST ELITE 750NC Manual – Optimized PDF
JBL EVEREST ELITE 750NC Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals