JBL Jembe Manual
- June 2, 2024
- JBL
Table of Contents
JBL Jembe Manual
TWO-PIECE SPEAKER SYSTEM
EASY SETUP GUIDE
The JBL ® Jembe system is the latest innovation from JBL, a long-time leader in the manufacture of high-end component and computer audio systems. JBL’s audio heritage, combined with continuous research, has provided the advanced technologies included in the JBL Jembe system. A unique, new full-range transducer was designed specifically to fit into small speaker enclosures while providing significant low bass. The result is a compact and elegant satellite speaker that provides superior low bass, midrange and highs.
The JBL Jembe speaker system has a built-in power-saving feature: If no audio signal is present for approximately three minutes, the speakers will go into power-standby mode and the white LED will turn off. Once the JBL Jembesystem detects an audio signal, the speakers will return to normal playing mode, and the white LED will light up.
SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
- To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
- The mains plug of the power supply cord shall remain readily operable.
- Do not expose batteries to excessive heat such as sunshine, fire or the like.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Warning : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not dispose of electronic products as unsorted municipal waste.
In some countries or locations, it is illegal to dispose of used electronic
products as household waste or to put them in landfills. Contact your retailer
or local government officials for information on how and where to recycle used
electronic products.
FCC STATEMENT AND WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
IC STATEMENT AND WARNING (CANADA ONLY)
This Class B digital apparatus complies with Canadian ICES-003.
FOR CANADIAN MODEL
This Class B digital apparatus complies with Canadian ICES-003.
This product is intended to be supplied by a Listed Power Unit, marked with “Limited Power Source,” “LPS” and “Class II” on the unit, and output rated 12V DC, 1.5A minimum. Tma 35° C. The minimum refers to the Tma value, not 1.5A min.
TECHNICAL SPECIFICATIONS
Features, specifications and appearance are subject to change without notice.
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
Designed in USA
Made in China
© 2011 Harman International Industries, Incorporated. All rights reserved. JBL
is a trademark of Harman International Industries, Incorporated, registered in
the United States and/or other countries.
Part No. 950-0401-001 Rev. A
JBL Jembe Manual – Optimized PDF
JBL Jembe Manual – Original PDF