JBL Flip 4 Manual

June 2, 2024
JBL

FLIP4

FLIP4

What's in the box

Flip3

cable

Buttons

Buttons

Connections

Connections

Bluetooth

1. Bluetooth connection

Bluetooth connection

2. Music control

Music control

3. Speakerphone

Speakerphone

Speakerphone

Voice Assistant

Tap “Voice Assistant” in the JBL Connect app, to make the button as the activation key of Siri or Google Now on your phone.

Voice Assistant

Please the button on the speaker to activate Siri or Google Now on your phone. Please make sure the Siri or Google Now is enabled on your phone.

Voice Assistant

Voice Assistant

JBL Connect+

Wirelessly links 100+ JBL Connect+ compatible speakers together.

Step 1

JBL Connect+

Step 2

JBL Connect+

Play music on one of your JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play the same music from the music source.

Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming.

JBL Connect +

JBL Connect +

JBL Connect +

JBL Connect +

LED Behavior

LED Behavior

Warning

Warning

JBL Rip 4 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Flip 4 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Flip 4 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Rip 4 to water while charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as a speaker that can be immersed in water up to 1m for up to 30 minutes.

  • Bluetooth version: 4.2
  • Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
  • Transducer: 2 x 40mm
  • Output power: 2 x 8W
  • Frequency response: 70Hz – 20KHz
  • Signal-to-noise ratio: z80dB
  • Battery type: Lithium-ion polymer (3.7V, 3000mAh)
  • Battery charge time: 3.5 hour fa 5V1A
  • Music playing time: up to 12 hours (varies by volume level and audio content)
  • Bluetooth transmitter power: 0 — 9dBm
  • Bluetooth transmitter frequency range: 2.402 — 2.480GHz
  • Bluetooth transmitter modulation: GFSK, n/4-DIDPSK, 8DPSK
  • Dimensions (H x W x D): 68 x 175 x 70 (mm)
  • Weight: 515g

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

JBL Flip 4 Manual – Optimized PDF
JBL Flip 4 Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals