AirELD Track GPS Tracking User Guide

AirELD Track GPS Tracking

Login

Enter your username and password assigned to you by your Fleet Administrator

Home Screen

1. Bluetooth Connection – Used for connecting the app with the ELD.
   Grey – No Connection between the app and ELD.
   Orange – Trying to connect with the Device.
   Blue – App connected with the ELD installed in the truck.

2. Driver Vehicle Inspection Report (DVIR ) – This is one of the two ways for the driver to perform their DVIR.

3. Daily Graph – The graph records all the duty statuses of the driver for a given day. It displays Off Duty (OFF), Sleeper Berth (SB), Driving (DR)and On Duty (ON) me.

4. Current Cycle – The flag indicates the current country in which the truck is operang. Drivers can set the cycle to switch atomically or manually by clicking on the flag.

5. Add Co-Driver – This opon enables team drivers to log in simultaneously with the main driver.

6. Trailers – The drivers can add trailer info in this section. Information entered here will reflect in the DVIR report only if the trailer info is added prior to performing the DVIR.

7. Shipping Documents – The drivers can add their shipping document details such as Bill of Lading Number, order numbers or any other reference numbers related to the trip.
   Pair SB – The drivers who want to split their sleeper berths can turn on the switch to indicate that they are sapling their sleeper berth me. For drivers who do not split their sleeper berths, the buon needs to be turned Off. The opon will be turned off by default.
   Yard Moves – Drivers can turn on this opon aer pung their status in On Duty.
   Personal Use – Drivers can turn on this opon aer pung their status in Off Duty.

Connecting the App with the ELD

Air ELD App will connect with your vehicle’s ELD using Bluetooth. Follow the steps mentioned below for a establishing a Bluetooth connection:

1. Select the ELD icon to see a list of vehicles on your app. Select the vehicle which you want to drive
   

2. Upon selecting the vehicle, the Bluetooth connection will be established, and the vehicle icon will turn Blue. As shown below.
   

Driving Screen

1. Once your vehicle is in moon and goes above the speed of 8 km/h, your duty status will atomically be set to ‘Driving’.

2. When your vehicle is at 0 Km/ H, the status will change to ‘Stationary

3. To change the duty status manually, tap on the ‘Driving’ prompt on screen. Select the appropriate duty status and enter the location and notes while changing the duty status.
   

4. If the vehicle remains stationary for five minutes, a pop-up window will appear if you would like to
   change your duty status. To update the duty status, select ‘Update Status’. To remain in driving status, select ‘Continue Driving ’. If nothing is selected, your duty status will atomically be changed to ‘ ON Duty ’.

Roadside Inspection

1. Tap on the Inspecon menu icon on the main screen.
   

2. To let an officer, inspect your logs directly from your device. Select ‘Begin Inspection.
   

3. To send ELD output files to the DOT via email or web service, tap ‘Send Output File’
   

4. To email or fax a copy of your logs to an officer, select ‘Send Logs’ opon

5. Enter the recipient’s mail and click send.

Certifying Logs

The Air ELD app will prompt the driver to certify past day’s log upon Login and Logout. The driver can choose to sign the logs in bulk or one by one as described in the following steps.

Certifying your logs just aer Logging in

The drivers will get a notification to certify their past day’s logs are they login in the app. The prompt is displayed in the picture below. Drivers can certify their log by selecting the “Sign” opon on the prompt.

Certifying your logs from the Home Page

1. Click on the “ HOS ” open on the Home screen. Select the Day from the screen menu and press the ‘Certify and Submit’ button.

2. Draw your signatures and press ‘Agreed’

Driver Vehicle Inspection Reports (DVIR)

For a new DVIR at the beginning of the day, the driver can select the “No DVIR” prompt on the home screen on the top right corner of the daily graph.

The second way to perform the DVIR is illustrated in the following steps:

1. Click on the Daily graph on the home screen and select “DVIR” opon on the next page.
   

2. Select the create opon to open the DVIR form.
   

3. Vehicle and trailer info will be auto filled only if the driver has connected the app with the ELD and entered the trailer info on the home screen.

4. If there are no defects found while inspecting the tractor and trailer, the driver can select the next opon. If there are defects found, the driver can select “Add Vehicle/ Trailer Defects” open’s on the screen and select the appropriate defects.
   

5. Aer compleng the ‘General’ and ‘Defects’ forms, use the ‘Next’ buon to go to the ‘Sign’ menu. A pop-up signature pad will appear. Aer signing, press ‘OK’ and then press the ‘Submit’ button.

Adding and Switching Co-Drivers

1. Add the co driver from the home screen. Enter username and password provided by the fleet
   admin. Once the co driver is added
   

For switching the co drivers, click on the co driver name and select the driver under “SwitchDriver”.

Troubleshooting ELD Connection Issues

1. Tap on the (ELD Icon) on the top right corner of your home screen. If there is a currently selected vehicle, select ‘Leave Vehicle’. Then reselect the vehicle you are trying to connect with. If a pairing request dialog appears on screen or in a system tray, select the open to pair with the ELD. If the app sll doesn’t connect with the ELD, then close the dialog box and follow to step 2.
   

2. Tap on the ELD icon on the top right corner of your screen. If there’s a currently selected vehicle then select ‘Leave vehicle’. Go to your device’s Bluetooth sengis and reset the Bluetooth connection by turning it off and then turning it back on. Now, reselect the vehicle you want to connect to. The connection dialog box should appear and connect the ELD to your app. If this step doesn’t resolve the connection issue, then follow step 3.
   

3. Unplug the ELD device safely from your vehicle and wait for 10 seconds before plugging the device again. Reboot your phone or tablet before among to establish a connection with the ELD device. Once, the lights on the device are blinking, try to reconnect with the ELD with steps mentioned in point.

How to Identify Diagnostics & Malfunctions on the ELD APP
The FleetHunt ELD will display distinct signs for Diagnostics & Malfunctions.Diagnostic: e\Zents will be notified by displaying a D sign and Malfunctions will be displayed using ai M sign.

Actions : The diagnostics and Malfunctions cannot be cleared manually lbiy the driveli. The ELD will monitor the diagnostics and Malfunctions and will clear them automatically once the requirements have been fulfilled.

List of Malfunctions and Diagnostics

“The standard” in the following points refers to the “Technical Standard for Electronic Logging Devices v.1.2, October 27, 2020.”

1. Power Compliance

   • An ELD must set a power compliance malfunction if the power data diagnostics event described in provision 4.6.1.1(a) of the Standard indicates an aggregated driving me understatement of 3 minutes or more on the ELD over a 24-hour period across all driver profiles, including the unidentified driver profile.

2. Engine Synchronization

   • An ELD must set an engine synchronization compliance malfunction if connectivity to any of the required data sources specified in provision 4.3.1 of the Standard is lost for more than 30 minutes during a 24-hour period aggregated across all driver profiles, including the unidentified driver profile.
     

3. Timing Compliance

   • The ELD must periodically cross-check its compliance with the requirement specified in provision 4.3.1.5 of the Standard with respect to an accurate external UTC source and must record a ming compliance malfunction when it can no longer meet the underlying compliance requirement.

4. Positioning Compliance

   • An ELD must monitor elapsed me during periods when the ELD fails to acquire a valid position measurement within 8 kilometers of the CMV’s movement. When such elapsed me exceeds a cumulative 60 minutes over a 24-hour period, the ELD must set and record a pensioning compliance malfunction.

5. Data Recording Compliance

   • An ELD must monitor the completeness of the ELD event record information in relation to the required data elements for each event type and must record a missing data elements data diagnostics event for the driver if any required field is missing at the me of recording.

6. Monitoring Records Recorded under the Unidentified Driver Profile

   • If more than 30 minutes of driving in a 24-hour period show unidentified driver on the ELD, the
     ELD must detect and record an unedified driving records data diagnostic event and the data
     diagnostic indicator must be turned on for all drivers authenticated into that ELD for the current
     day and the following 14 days.

7. Data Transfer Compliance

   • If the monitoring mechanism fails to confirm proper in-service operation of the data transfer mechanism(s), an ELD must record a data transfer data diagnostic event and enter an unconfirmed data transfer mode.

In case of a malfunction

A Driver must do the following:

1. Contact Air ELD support for troubleshooting the issue. Note the malfunction of the ELD and provide written notice of the malfunction to the motor carrier within 24 hours.
2. If the ELD records are not retrievable from the ELD, reconstruct the record of duty status for the current 24-hour period and the previous 7 consecutive days.
3. Manually prepare a record of duty status unl the ELD is serviced and no longer malfunctioning.

The Motor Carrier should do the following:

If a motor carrier receives or discovers information concerning the malfunction of an ELD, the motor carrier must take actions to correct the malfunction of the ELD within 8 days of discovery of the condition or a driver’s notification to the motor carrier, whichever occurs first.

Find the app in the Google Play Store

The ELD provider, i.e., Air ELD should do the following:

Send a new ELD device upon notification from the carrier.

Customer Support

Contact

E-Mailsupport@aireld.com

Websitesupport@aireld.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>