Guangdong Wangjia Intelligent Robot S600 Sweeping Robot Vacuum Cleaner User Manual

Guangdong Wangjia Intelligent Robot S600 Sweeping Robot Vacuum Cleaner

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

WARNING -To reduces the risk of fire, electric shock, or injury:

1. Do not leave the appliance when plugged in. Unplug from outlet when not in use and before serving.
2. Do not use outdoors or on wet surfaces.
3. Do not allow it to be used as a toy. Could attention is nice! when used by or near children.
4. Use only as described in this manual. Use only the manufacturer’s recommended attachment.
5. Do not use a damaged cord or plug. If an appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
6. Do not handle plug or appliance with wet hands.
7. Do not put any object into the opening!!. Do not with any opening blocked; keep free of lint, hair, and anything that may reduce airflow.  Keep hair and lose clothing. fingers, and all parts of the body away from openings and moving parts.
8. turn off all controls before unplugging.
9. Use extra care when cleaning on stairs.
10. Do not use to pick up flammable or combustible liquids, 11uch a11 gasoline, or use in area11 where they may be present.
11. Do not pick up anything that is burning or smoking, such as cigarettes, matche11, or hot ashes.
12. Do not use without a dust bag and/or filters in place.
13. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that has the switch on invites accidents.
14. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
15. Use appliances only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire.
16. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns
17. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
18. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion.
19. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
20. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
21. Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.
22. This product is used for household, not for commercial use.
23. For use only with CMICR18650F9M-4S1P (or provided by the manufacturer) battery pack. For use only with AD-0121900060US (or provided by the manufacturer) charger.
24. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
25. Children should be supervised to ensure that they do not play with the appliance.
26. the appliance is only to be used with the power supply unit provided with the appliance.
27. This appliance contains batteries that are only replaceable by skilled persons

Product Description

Product List

Accessories list

Installation steps

1. Connect the power cord, and then put the excess wire into the wire box
2. Place the charging stand against a wall on a flat floor, and then connect the power Note:
   • 0.5 0.5 57 Make sure there is a space of more than 0.5 meters on both sides and more than 1.5 meters in front
   • When installing, try to keep the power cord in the air; if it is close to the ground, it may be dragged by the host, causing the charging stand to lose power.
   • The charging indicator light is always on when the power is on
3. install brush
   Put(L brush), (R brush), and letter in the bottom case into the bottom respectively

Turn on the main power switch, until the indicator light is always on, and then put the host on the charging stand to charge

Note
With Insufficient power cannot be turned on please place the host on the charging stand, and the device will automatically turn on because the device can normally only when the power is 220% (as the picture shows) The front end of the machine is facing the charging stand so that the charging contacts on the main unit are in contact with the charging shrapnel, and the distance between the front end of the machine and recharging stand is about 0-2CM

mopping components

1. install the two-in-one water pump tank

2. Install the rag: Glue the mop flat to the bottom of the mop holder

3. method of collecting water: Open the lid and fill it with water and close the lid Note: It is recommended to remove the dust box and then add water to avoid water entering the dust box. Lift the handle first, take the dust box out of the water tank, then fill it with water and fasten the lid

4. Install the water box
   Put the dust box into the water tank and lay the handle flat Press and hold the button in the middle of the water tank and push it When you hear a click, it is in place Press and holds the two buttons in the middle of the mop bracket along the back of the main unit Push it in horizontally until you hear a “click” sound to indicate it is in place

5. Remove the electronically controlled water tank When the main unit finishes work, press and hold the two buttons in the middle of the mop holder, remove the mop holder backward, and place the cleaning cloth(Do not move or trip the main unit during work) After removing the mop bracket, press and hold the button in the middle of the water tank and pull it out horizontally along the back of the main unit, pour out the remaining water in the water tank, and remove the garbage in the dust box. (Do not move or tip the host during work)

6. Instructions for use

7. Do not use the water tank when no one person is at home For safety, be sure to remove the water tank when charging or not in use

8. Do not use the mopping function on the carpet.

9. You can prevent the device from entering the carpet by setting a forbidden area.

10. In order to obtain a better mopping effect, it is recommended to install the mopping module after cleaning it three times for the first use.

11. If you need to add water or clean the rag during the operation, please pause in place first, follow the above steps, and then restart

12. The mopping function of the equipment only has the effect of wiping., which is helpful for deep cleaning, but cannot effectively remove stubborn stains and cannot completely replace manual labor

Instructions for use

Power(ON/OFF):

1. turn on after flashing white light, will hear: in Chinese POWER ON in English'”, and then it works
2. turn’OFF, Cut off the power supply, which means it’s shut down completely.

Power key(note:tutning’ON’means it works):

1. powering off: press OWith 3 seconds, After flashing white lig and hearing “POWER ON” Shutdown to complete
2. In the power-on state, long press the switch and the power-off complete button for 8s, the red light flashes quickly and then goes out, and the voice announces “POWER OFF

Sweeping/Pause
After working. press Or use the mobile APP to start the automatic cleaning or pause the function

Note:

• The sweeping robot cannot be used to clean liquid
• IT if the power is lower than 20%, the cleaning task cannot be performed, Please charge first and then continue cleaning being lower than 20% during the cleaning process, the device will automatically recharge
• Please remove all kinds of wires on the ground before cleaning Start the recharge or control the recharge by the mobile phone APP, the white breathing light will be always on when the machine is charging

Note: If the charging base is not found, the host will automatically return to the starting position. Please manually put the host back on the charging stand for charging The mobile phone APP controls the recharging. When the machine is charging. the white breathing might always be on.

Suction adjustment
Use the remote control or mobile APP to choose three suction modes: quiet, normal, and strong(Default is normal)

Water regulation (in tank mode)
Using the mobile phone APP or remote control, you can choose three water volume modes: low, medium, or high(The default is mid-range)

Silent mode
Turn on silent mode. If the device will not play the voice, you can use the mobile APP or remote control to turn on or off the silent mode

Reset WiFi
When the router’s configuration, password, or other reasons cause the mobile phone to fail to connect to the machine, please also: Press with 3 seconds. until hearing”WiFi resetting sounds and WiFi light will be turned It turns white and flashes quickly, indicating that the reset is successful. Schedule a cleaning Use the mobile APP to set the scheduled cleaning time, the host will automatically start cleaning at the specified time

Note: During work, do not move the device at will and frequently.

Instructions for using automatic cleaning

• automatic cleaning
  The main unit button, mobile APP, and remote control press “AUTO” to perform automatic cleaning mode

• spot cleaning
  With 3 seconds or using the remote control, the machine will take itself as the canter at 1 2mX1 2m

• Edge cleaning
  You can use the mobile phone APP or remote control to clean along the edge. The machine will immediately move to the right and enter the all to clean after encountering an obstacle.

• Random cleaning
  Use the mobile APP to press the random cleaning mode the machine will enter the random cleaning mode

Instructions of the Remote Controller

Connect to the sweeping robot APP

APP download

• Method 1: Go to the app store, and search for “Tuya Smart” to download
• Method2: Scan the QR code below to download

Adding equipment
Open the APP and click the+” button on the home page to enter the device selection page. Select the cleaning robot and complete the device addition according to the instructions

Firmware upgrade
After entering the firmware upgrade function through the mobile phone APP and detecting the new firmware, follow the prompts to guide the upgrade. Firmware upgrade requires power 2 50%. It is recommended to place the device on the charging stand to upgrade

Reset the Wifi
When the router’s configuration, password, or other reasons cause the phone to fail to connect to the machine, please do the same: Press 1 For 3seconds, until hearing”WIFI resetting” and the WiFi indicator turns white and flashes quickly, indicating that the reset is successful.

Routing maintenance

Roller brush

1. Turn the machine over and press the buckle on the brush cover to take out the brush
2. Use the matching cleaning tool to remove the dust in the roller brush and the roller brush cavity, and then clean the entanglement on the roller brush
3. Reinstall the roller brush and press the roller brush cover fixing the buckle

Brush inside

1. Turn the machine over and pull out the side brush vertically
2. Reinstall after cleaning the tangled hair and dirt
3. Correspond the left brush (L) and right brush (R) to the letters Land R on the bottom case, and press down to install

Note: It is recommended to replace the side brush every 3-6 months to ensure the cleaning effect

Routing maintenance

Dust Box

1. Press and hold the dust box button to pull out the dust box backward
2. Open the dust box and take out the garbage

Filter

1. After a long time of use, remove the filter gauze, filter sponge, and HEPA filter
2. Put the removed filter gauze, filter sponge, HEPA filter, and dust box under the faucet to rinse.
3. After cleaning, shake off water droplets, dry the filter screen and dust box, and wait until they are completely dry before use.
4. After drying thoroughly, install the filter gauze-filter sponge -HEPA filter in order

Note:

• Please rinse with clean water, do not add any detergent
• Do not use a brush or fingers to clean the filter Air-dry the filter for at least 24 hours and dry thoroughly
• It is recommended to replace a set of filters every 3-6 months

Two-in-one water pump tank (recommended to clean every time)

1. Remove the rag and drain the water from the tank
2. Clean the dishcloth, dry the water tank and dishcloth, and wait for the next use
3. First it the handle, remove the dust box from the tank, pour out the excess water and then dry the tank

Battery
The host has a built-in high-performance rechargeable lithium-ion battery pack. In order to maintain battery performance, and daily use Please keep the host charged If you do not use it for a long time, please turn it off and store it, and charge it at least once every three months to avoid damage to the battery due to excessive discharge.

Routing maintenance

Sensors (regular cleaning is recommended)

1. Wipe the various sensors on the machine with a soft dry cloth, including
2. Along the wall sensor on the right side of the main unit
3. Three anti-drop sensors at the bottom of the main unit
4. The infrared anti-collision sensor in front of the host
5. Charging contacts at the bottom of the host, charging shrapnel of the charging base (please power first when cleaning)
6. Charging stand signal transmitting area

BASIC INFORMATION

COMMON QUESTIONS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>