Shen Zhen Hidin Technology TB41 Wi-Fi Switch Module User Manual
- June 5, 2024
- Shen Zhen Hidin Technology
Table of Contents
Shen Zhen Hidin Technology TB41 Wi-Fi Switch Module
Package Includes
- 1x WIFI Switch Module
- 1x User Manual
Specifications
| Type | WIFI Switch Module |
|---|---|
| Model | TB41 |
| Power supply mode | Neutral+Live Wire |
| Rated Voltage | AC100-250V~50/60Hz |
Rated Power
| INC 1200W (Max)
LED 150W/ Gang (Max)
Wireless Frequency| 2.4GHZ
Wireless Standard| IEEE802.11 b/g/n
Size| 40.34322.5mm
Indicator light meaning
| Indicator | Status | Discription |
|---|---|---|
| Buzzer sound | **** |
Di Di, Di Di, ..,..
| Ready for connection (Default Mode Only)
Buzzer sound| Di Di Di Di,Di Di Di Di, ….| Ready for connection (AP Mode Only)
Green light
| Flash Rapidly
(2 times per second)
| Ready for connection (Default Mode Only)
Green light| Flash Slowly
(1 time every 3 S)
| Ready for connection (AP Mode Only)
Product Diagram
Wiring Diagram
Install the “Smart Life”APP
Download the “Smart life”
-
Download and launch the “Smart life” App from the App Store or Google Play. or scan the QR code below. (The free app”Smart Life” is compatible with mobile devices that support IOS8.0 above, Android 4.4 above)
-
Create a new account.
-
Connect you mobile device to a 2.4GHz Wi-Fi network.
Note: This product only support 2.4G networks.
Setup Guide
Easy Setup
- In the app, select the【+】icon.(Figure 1)
- Select the device type 【Electrician】,and then tap【Switch(WI-FI)】(Figure 2)
Default Mode(Recommend)
- Step 1.Make sure the buzzer sound “Di Di ,Di Di, Di Di,” if not, Quick ON/OFF four times for reset.
- Step.2 .Enter Wi-Fi password to join your network
- Step.3 Power on the
- device and confirm
- Step4.Follow the prompts to complete the next step.
AP Mode(Alternative)
- Step 1.When the buzzer sound “Di Di ,Di Di, Di Di,..,..” once again quick ON/OFF four times. until the buzzer sound: Di Di Di Di, Di Di Di Di,….
- Step.2.Enter Wi-Fi password to join your network
- Step3. Select “AP Mode”
- Step4.Follow the prompts to complete the next step.
APP operation interface
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>