Ovation OP-4BT Acoustic Electric Guitar with Preamp Owner’s Manual

June 4, 2024
Ovation

Ovation OP-4BT Acoustic Electric Guitar with Preamp

Ovation-OP-4BT-Acoustic-Electric-Guitar-with-Preamp-
PRODUCT

Product Information

  • Specifications:
    • Model: OP-4CT
    • Input: 1KHz (Sine Wave) 185mVac
    • Piezo Output: 10KHz (78.3mVac) connected with Myler Capacitor 473J
    • Frequency Response: 30Hz – 15mVac
    • S/N Ratio: 38dB (Signal to Ground) Min

Product Usage Instructions

  • Gain Control:
    • Adjust the overall output level of the preamp. Clockwise increases sound level, and counter-clockwise decreases sound level.
  • EQ Bass:
    • Boosts or cuts the low-frequency elements of the guitar’s sound. Adjust to increase or reduce low-frequency power.
  • EQ Mid:
    • Boosts or cuts the middle-frequency elements of the guitar’s sound. Adjust to increase or reduce mid-frequency power.
  • EQ Treble:
    • Boosts or cuts the high-frequency elements of the guitar’s sound. Adjust to increase or reduce high-frequency power.
  • Built-in Tuner:
    • Press the tuner button to access the built-in tuner for easy guitar tuning without external equipment.
  • Display:
    • The tuner display window shows information when tuning, ensuring you are always in tune and ready to play.

FAQs

  • Q: How do I change the battery in the preamp?
    • A: To change the battery, locate the battery compartment on the preamp, remove the old battery, and insert a new one following the polarity markings.
  • Q: Can I use the preamp with other acoustic/electric guitars?
    • A: The OP-4BT preamp is specifically designed for Ovation Acoustic/Electric guitars. While it may work with other guitars, optimal performance is guaranteed with Ovation guitars.

INTRODUCTION

OP-4BT preamp

  • Congratulations on your choice of the Ovation Acoustic/Electric guitar equipped with the OP-4BT preamp.
  • This starting preamp is designed to provide essential features for a great acoustic/electric guitar experience.
  • To ensure optimal performance, please read this manual thoroughly.

PREAMP FEATURES

OP-4BT PREAMP FEATURES

  1. GAIN:
    • Adjusts the overall output level of the preamp.
    • Turning this control clockwise increases the sound level; counter-clockwise decreases the sound level.
  2. EQ BASS:
    • Boosts or cuts the low-frequency elements of the guitar‘s sound.
    • If moved above the centre position the amount of low frequency power is increased.
    • Below the centre, these sounds are reduced. In the centre detent position, the preamp does not affect these frequencies.
  3. EQ MID
    • Boosts or cuts the middle-frequency elements of the guitar‘s sound.
    • If moved above the centre position the amount of mid-frequency power is increased.
    • Below the centre, these sounds are reduced. In the centre detent position, the preamp does not affect these frequencies.
  4. EQ TREB
    • Boosts or cuts the high-frequency elements of the guitar‘s sound.
    • If moved above the center position the amount of high-frequency power is increased.
    • Below the center, these sounds are reduced. In the centre detent position, the preamp does not affect these frequencies.
  5. BUILT-IN TUNER
    • The OP-4BT comes with a convenient built-in tuner, allowing you to easily tune your guitar without the need for external equipment. This feature ensures that you‘re always in tune and ready to play.
  6. DISPLAY
    • When you play a note after pressing the tune button, the tuner display window annunciates the following information.
    • TUNER ENABLED
    • The upper and lower segments alternately flash when the tuner is on and no note is played.
    • NOTE IN TUNE
    • When the note played is in tune with the reference, the note names are displayed with a „diamond“ on the right.
    • NOTE FLAT
    • When the note is flat, the note names are displayed with an arrow pointing in the direction to move the string‘s pitch.
    • NOTE SHARP
    • When the note is sharp, the note names are displayed with a down arrow in the direction to move the string‘s pitch.
  7. OPERATION
    • To operate the preamp, ensure you have a fresh 9V battery installed correctly in the battery compartment.
    • Plugging in a 1/4“ shielded guitar cable into the jack activates the electronics in your guitar.
    • The tuner can be used without plugging in.
    • For the best results, connect the guitar to a PA system or an acoustic guitar amp after setup.Ovation-OP-4BT-Acoustic-Electric-Guitar-with-Preamp-FIG-1 \(5\)

Specifications

Specifications

INPUT| 1KHZ(SINE WAVE) 185mVac
VOLUME CONDITION
Master Volume| Max
Bass volume| centre
Treble Volume| Center
Tuner s/w| Off
Middle Volume| Center
PIEZO OUTPUT
100Hz(80mVac)| 1KHz(85mVac)| 10KHz(78.3mVac)
Tuner on| 15mVac
-3DB Frequency| 30Hz
S/N Ratio| 38dB (Signal =>GND)
Hum & Noise| 5mVac (Signal =>GND)
FREQUENCY RESPONSE
 |  | Min| Center| Max
Bass| 80Hz| 29mVac| 85.6mVac| 260mVac
Middle| 1KHz| 29mVac| 85.2mVac| 238mVac
Treble| 15KHz| 16.7mVac| 77.6mVac| 413mVac
LOW BATTERY| 5.5Vac
---|---

Ovation-OP-4BT-Acoustic-Electric-Guitar-with-Preamp-FIG-1
\(6\)

CONTACT

  • 5G EEWNA

  • mums-i4c BGTm pure

  • a Omeplsnitzer Str. 58
    08626 Adorf / Germany

  • ovation guitars

  • ovation guitars official

  • ovation guitars official

  • ovationguitars.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Ovation User Manuals

Related Manuals