HOMCOM 920-037 Corner Writing Table Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM 920-037 Corner Writing Table
Product Specifications:
- Model: IN220800686V02_GL
- Hardware Kit Contents: Various screws and components
- Dimensions: 355mm x 355mm
Product Usage Instructions
Assembly:
- Identify all components in the hardware kit.
- Follow the explosion figure diagram to understand the assembly process.
- Use the provided screws and components to attach the parts together.
- Ensure all connections are secure and tight.
Mounting:
- Choose a suitable location for mounting the product.
- Use appropriate tools to securely mount the assembled product.
- Ensure the product is level and stable after mounting.
Maintenance:
- Regularly check for loose screws or components.
- Tighten any loose parts to maintain stability.
- Clean the product with a soft, damp cloth as needed.
FAQ
- Q: How many screws are included in the hardware kit?
- A: The hardware kit includes various screws including M3.5×14, M6x34, M7x38, and more. Refer to the manual for specific quantities.
- Q: What are the dimensions of the product?
- A : The product dimensions are 355mm x 355mm as specified in the manual.
- Q: How should I clean the product?
- A: Use a soft, damp cloth to gently clean the product. Avoid using harsh chemicals that may damage the surface.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IF HAVE THIS ACCESSORY
NOTE DIFFERENT MODELS
QUICK FIT: Tighten quickfit until the shoulder is flush with the panel.Do not overtighten or under-tighten.
Quickfit head should be in the centre of the cam lock when the two panels are joined.
Turn cam lock clockwise to tighten.
IF HAVE THIS ACCESSORY
NOTE : Pull inner and outer drawer runners apart before fixina them to panels.
Slide drawer runners apart until the drawer lock can be seen, as shown.
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
Your inner and outer drawer runners are ready to be fixed to panels.
BOX 1-2
BOX 2-2
EXPLOSION FIGURE
HARDWARE
INSTALLATION
INTENDED USE IN OFFICE OR HOME
ABOUT CARE AND MAINTENANCE OF THE TABLE :
- 1. To prevent the table from being scratched by hard objects, do not let metal objects break the surface of the table and leave bruise marks.
- 2, do not let the heat source has been baking, away from the source of fire. The surface should be fully considered to prevent dry cracking and deformation.
- 3. When in use, pay attention to the placement in a stable environment, otherwise there will be deformation.
- 4, prevent direct sunlight, can use gauze to prevent sunlight, so not only does not affect daylighting, but also can maintain the desk.
- 5, to Check the desk, regularly clean up, and remove the dust and corrosive gas and liquid, to prevent the desk Corrosion affects the whole integrity of the table.
- 6, when using water to wipe the desktop, to wipe it clean, do not leave moisture on the desktop.
- 7, when cleaning to use a clean soft cloth, do not be too hard to wipe.
If you have any questions, please contact our customer care center.
Our contact details are below:
- 001-877-644-9366
US
- [email protected]
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
CA
- If you have any questions, please contact our customer care center.
Our contact details are below:
- 416-792-6088
- [email protected]
- Imported by Aosom Canada Inc.
- 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
- MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
MADE IN CHINA