Speedi-Spreader 98-SS75G Midspan Tool Instruction Manual
- June 1, 2024
- Speedi-Spreader
Table of Contents
Speedi-Spreader 98-SS75G Midspan Tool
Installation Instructions
Step 1.)
Insert the wedge between the two “Hot” legs and above the neutral
Step 2.)
Twist the wedge 90 degrees so that the notch, at the thin end, is facing up.
NOTE: Try to keep it as perpendicular as possible, for stability.
Step 3.)
Draw the wedge toward you until the top wire drops into the top notch.
Step 4.)
Pull the bottom “Hot” leg towards you with one hand, while pushing the wedge
away from you with the other. When the bottom wire “pops” into the bottom
notch you are ready to permanently install a Midspan Spreader .
Customers Support
For more information go to Birt Industries, L,LC at www.speedi- spreadi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>