JIMEI D01 SmartWatch Instruction Manual

JIMEI D01 SmartWatch

Instructions For Use

Caution
Please consult your doctor before starting any exercise and diet plan. Smartwatches can monitor your heart rate, but testing data cannot be for any medical purpose.

Device compatibility
Support Android 5.0 and above, iOS 9.0 and above.

Charging
Please use the proper usb cable for charging. If the device is not used for a long time, please remember to recharge at least once a month.

• Please attach the magnetic charging cable to the pogo pins, the magnets will automatically adsorb the positive and negative poles for charging.
• Please ensure that the charging contacts are free of dirt and impurities, if any, please wipe them clean, otherwise it will not charge.
• Please use a 5V 500mA adapter and charge for 2-3 hours.

How to connect a smartwatch with a mobile phone

1. Power on: Press the side button to power on.
2. Install APP: Scan the QR code through a mobile phone, or search and install the ” Da Fit” APP from the APP store or Google Play Store.

Bluetooth Call Connection

1. For Android phones, after the watch is connected to the APP, there will pop-up a bluetooth call connection reminder, click “Pair” to finish the connection.
2. For iOS and some Android phones, after the watch is connected to the app, the user has to manually enable the bluetooth call function. Go to the mobile phone’s setting, ” Setting – Bluetooth-Search D01″, click, and pair with “DO1”.

Warm reminder

1. To get the best experience, please update the APP version to the latest.
2. The phone’s compatibility is Android 5.0 and above, iOS 9.0 and above.
3. For 1st time connection with iOS, the user will receive a” Pair” request, please click “Pair” to finish the connection to ensure the watch will get real-time messages sync from calls & SMS & APP notifications.
4. For 1st time connection with Android phones, the user will receive an APP permission activation prompt. Please follow up on the guidance and operate, to avoid disconnection happened caused by permission issues.
5. To ensure the bluetooth connection is OK, please ensure the phone’s internet, GPS positioning, and bluetooth are working.
6. If lf watch’s bluetooth cannot be searched or connected, please try to restart or reboot the watch, then reconnect.

Unbind:
Unbind from Android phone: Click “Unbind” in the app Unbind from iOS phones: There 2 steps for iOs unbind, 1 Click “Unbind” in the app, 2″ Go to the phone’s settings, find the bluetooth name and choose ignore the device.

Precautions

1. Please use the included usb cable and an adapter with 5V 500mA. It is forbidden to use the over-voltage load power supply to avoid hardware damage.
2. It has a built-in battery and cannot be removed. Please do not replace the battery yourself.
3. The operating environment of the wristband is O’c to 45°c The charging temperature is 0°C to 45°C.
4. Please note when wearing: if you are allergic to skin or wear the watch too tightly, you may feel uncomfortable.
5. Please wipe and try the smartwatch before charging if any water on it. Or else, it will lead to failure or corrosion of the charging contact point.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>