ANKER A1902 Charging Base Instructions
- June 13, 2024
- Anker
Table of Contents
For FAQs and more information, please visit:
anker.com/support
Product Number: A1902
51005004004 V02
A1902 Charging Base
| @anker_o coal
@anker_jp
---|---
| @AnkerDeutschland
@AnkerJapan
@Anker
| @AnkerO coal
@Anker_JP
Attention
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
- The AC cord is for use with this product only.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
**Declaration of Conformity
**
Hereby, Anker Innovations Limited declares that the product type A1902 is in
compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC
& 2019/1782/EU. The full text of the EU declaration of conformity is available
at the following
internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the product type A1902 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com.
Indoor use only
**** This symbol indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
The following importer is the responsible party (contract for EU and UK
matters)
Customer Service
For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com
Or scan the QR code below:
https://rainbowbridge.anker.com/qrscan?key=anker-221202
24-month limited warranty*
Lifetime technical support
support@anker.com
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.