JIMEI D01 Smart Watch User Manual

User Manual

Instructions for use

1. The sensor should be close to the skin when measuring to avoid movement.
2. The product measurement results are for reference only and cannot be used as medical use and basis.
3. please charge the watch before use, charging takes about 2 hours.
4. charging please use the standard configuration of accessories to avoid charging accidental events.
5. Do not charge in the case of wet or product stained with water.

Charging schematic aligning the two contacts of the charger to the charging position on the back of the watch.
The other end is connected to a standard USB port and can be charged.

APP installation and connection

Scan the QR code or go to APP Store or App Store and search for “Vband” to download and install the APP.

Note: Android supports 4.4 and above systems.
ios support 8.4 and above system, Bluetooth hardware 4.0 and above.

Device Connection

http://app.xincore-tech.com/index.php/home/common/downApp

1. For the first time use, you need to bind the watch, click on the bind device selection, and find the device you need to connect.  If more than one device is nearby, when binding the device, select the MAC address of your own watch to bind, and the Bluetooth icon appears on the top of the watch that the watch is successfully connected to the phone. (Note: Before using  Bluetooth function, please confirm whether the Bluetooth synchronization switch of your cell phone system is turned on)
2. The audio connection needs to turn on the watch Bluetooth switch setting first, and then connect through cell phone Bluetooth search OD01-Au-dio after turning on.
3. Android phones need to read contact information and all address book permissions and cell phone settings to give APP background operation.
4. Apple phone system will prompt Bluetooth pairing request after the first APP connection, click “pairing” to connect, the bracelet can receive incoming calls, SMS, and other notifications from the IOS system push alert.

Watch function description

1. Topside button: short press the button to enter the secondary menu and choose different UI styles according to your needs.
2. Lower side button: long press for 3 seconds to switch on/off, short press on the dial page to extinguish the bright screen function, short press to return to the main interface.
3. Dial interface slides up to enter the message notification.
4. Dial interface slides down to enter the shortcut menu.
5. Dial interface slide left to right to enter the function menu interface.

Function Introduction

Main interface switching
In the main interface state, swipe left and right to select the menu.

Bluetooth dialing/calling

Dial the number on the watch or phone side respectively, and the watch and phone will be synchronized instantly.
Voice Control
Main interface menu, long press the up button, or gesture left slide the second page to enter the voice control menu.

Address Book

App side clicks to synchronize the address book. The watch can import 1000 entries.

Exercise log

Displays the current exercise steps, exercise mileage, and calories burned.

Body temperature

Measure the current body temperature and display the measurement result.
Note:

1. When the temperature sensor detects a temperature lower than 32 degrees, no data will be displayed.
2. When the temperature sensor detects a temperature higher than 43 degrees, no data will be displayed.

Heart Rate

Measures the current heart rate value and displays the measurement results.

Blood Pressure

Measures the current blood pressure value and displays the measurement results.

Exercise Mode

Sports mode menu, support a total of walking, running, yoga, elliptical, hiking, swimming basketball, soccer, badminton, table tennis, cycling 11 sports modes, in each mode interface are recorded exercise time and calories, click to enter, right swipe to exit.

Sleep

Total sleep duration, as well as deep sleep and light sleep duration, can be recorded and displayed. For more detailed analysis and data recording, you can log in the APP terminal to view.

Exercise Mode
Sports mode menu, support a total of walking, running, yoga, elliptical, hiking, swimming, basketball, soccer, badminton, table tennis, cycling 11 sports modes, in each mode interface are recorded exercise time and calories, click to enter, right swipe to exit.

Message Reminder

Open alert on APP, when there is QQ, WeChat, incoming call, SMS, etc. on your phone, the watch vibrates and displays the message content.

Find phone

When the bracelet is connected to the APP, click to enter to find the phone, and the phone ringer will ring after a while.

Set up

Theme selection, bright screen time, system, style switching

More Functions

Weather, calculator, alarm clock, stopwatch, remote control photo, sedentary reminder, drinking reminder, charging reminder, etc.
(APP Operation Introduction)

1. User registration: You can register users by cell phone number and email address, which is convenient for users to record and save and share sports and health information content, but for temporary users who are not registered, they cannot record and save relevant information.
2.  Connect the watch: In Add Device, search for the device, click and bind this device. Note: If you can’t find the device name, please check whether the bracelet is powered on; if the bracelet is powered on but you can’t find the device, it means that the bracelet is connected to other cell phones, so you should first delete the device in another bound cell phone. the device, before the normal connection to the new phone.
3. Step counting function: The step menu in the APP records the number of steps, calories, and mileage, which can display the percentage of completion according to the target steps set, and can distinguish the status of slow walking, jogging, and fast running, etc. Click into it to view the daily, weekly, and monthly history.
4.  Sleep function: display daily, weekly, and monthly sleep data in the form of charts and graphs, and calculate the daily sleep quality and sleep duration, and you can also check the history records.
5. Training function: It can facilitate real-time training, record exercise steps, time, calories, mileage, and exercise track, and can check the history of training records.
6.  Detection function: The detection menu in APP includes temperature, heart rate, blood oxygen, and blood pressure detection, while the test request is sent from the bracelet side, which will be displayed in APP synchronously, and also saved when viewing the history.
7.  About the software: If the APP or the bracelet firmware is updated, the APP will automatically issue an upgrade reminder, or you can manually upgrade through the menu.

Precautions for use

1. Prohibit immersion, diving, diving, bathing.
2. This product is an electronic monitoring product, not as a medical reference, the data is for reference only.
3. Please use caution to restore factory settings, restoring factory settings will lead to APP content settings and bracelet history data all lost.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>