PHILIPS FY3430-30 Hepa and Activated Carbon Filter Instructions
- June 1, 2024
- Philips
Table of Contents
PHILIPS FY3430-30 Hepa and Activated Carbon Filter
Product Information
Specifications
- Model: Mars DI Dach
- Size: 90x127mm
- Connectivity: Wi-Fi
- Control Modes: Auto, Turbo, Sleep
- Display: 3-digit display for air quality indicators
- Filters: NanoProtect filter Series 3 (FY3430/30)
Product Usage Instructions
Connectivity
You can use the dedicated app to control the purifier and monitor air
quality. Download and install the Philips Clean Home+ app.
Control
Power on the device and use the app to access various control functions:
- Auto Mode: Automatically adjusts settings based on air quality.
- Turbo Mode: Increases purification speed for quick results.
- Sleep Mode: Operates quietly for undisturbed sleep.
- Filter Status/Reset: Check filter lifetime status and reset after cleaning or replacing.
- Display Switch: Toggle between different information displays.
- IAI PM2.5 Gas Display: Monitor air quality indicators.
- Light On/Off: Control the visibility of the display.
Maintenance
Regular maintenance is essential for optimal performance:
- Clean the NanoProtect filter Series 3 when prompted by the device.
- Replace the NanoProtect filter Series 3 as advised by the device.
- If the filter produces odors, remove it, expose it to sunlight and ventilation for several hours, then reinstall. If odors persist, replace the filter.
Frequently Asked Questions (FAQ)
-
Q: How do I connect the purifier to the app?
A: Open the app, click on “Connect a New Device” or press the + button, and follow the on-screen instructions to connect your purifier. -
Q: What do the different air quality indicators mean?
A: The device provides indicators ranging from Good to Very Poor based on PM2.5 levels, gas presence, and allergen index. Refer to the manual for detailed explanations.
Connectivity
You can use the app to control the purifier and check air quality. Download and install the Philips app Clean Home+.
Open the app and click on “Connect a New Device” or press the “+” button to connect your device. Please follow the steps in the app.
Control
Display
Maintenance
When display shows
When display shows
- Press to check filter lifetime status.
- Press for 3 seconds to reset after cleaning or replacing filter.
The filter may produce smell after being used for a while because of the
absorption of indoor air. Remove the filter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the filter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>