Aloha Home FAN-D24W Orbital Mobile Drum Fan Owner’s Manual
- June 1, 2024
- Aloha Home
Table of Contents
Aloha Home FAN-D24W Orbital Mobile Drum Fan
Product Specifications:
- Model: FAN-D24W
- Power Supply: 120V / 60Hz
- Current: 1.8A
- Features: Orbital Internal Oscillation
Product Usage Instructions
Safety Precautions:
- Read and save the instructions before use.
- Always unplug the fan before moving or performing maintenance. Avoid touching the fan with wet hands.
- Non-qualified individuals should not attempt to disassemble, repair, or rebuild the fan.
- Unplug the fan when not in use.
- Avoid unplugging the fan by pulling the cable cord. Always unplug by holding the plug.
- Do not use the fan if there is damage to the cable cord or plug.
Initial Setup:
- The fan comes fully assembled; no additional assembly isrequired.
- Place the fan on a stable, flat surface away from hazards.
Adjusting Air Speed:
Rotate the switch knob to adjust the airspeed:
- 0: Stop
- 1: Low
- 2: Medium
- 3: High
Internal Orbital Oscillation:
Turn on the internal oscillation feature by rotating the switch knob to
“Orbital Oscillation.” To turn off the oscillation, rotate the knob to
“Orbital Oscillation Off.”
Adjusting Airflow Direction:
Tilt the fan head to the desired angle to adjust airflow upward or downward.
Rotating the fan head upwards helps circulate air throughout the room.
Cleaning and Maintenance:
- Unplug the fan before cleaning. Use a soft cloth to wipe the surfaces.
- Avoid immersing the fan in water.
- Ensure the guard is fitted onto the fan before operation.
- Supervise children to prevent misuse of the fan.
24″ ORBITAL MOBILE DRUM FAN
INTERNAL OSCILLATION
ITEM NO : FAN-D24W
120V / 60Hz, 1.8A
READ & SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning the product,please e-mail
our customer service by
aliceyoung@alohahome1.com
SAFETY INFORMATION
WARNING
- Read and save these instructions. Do not operate fan unless you have read these instructions.
- Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet.
- Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
- Unplug the fan when it is not in use.
- DO NOT unplug the fan by pulling the cable cord. Unplug by holding the plug and pulling.
- DO NOT use the fan when there is damage to the cable cord or plug. If the supply cord is damaged, it has to be replaced by the manufacturer, its service agent or similarly qualified persons.
- To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Do Not Use Replacement Parts That Have Not Been Recommended By The Manufacturer (e.g. Parts Made At Home Using A 3D Printer).
- DO NOT use the fan close to fires.
- DO NOT insert your hand or other objects into the grille or the movable parts.
- To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- DO NOT use this fan outdoors, this fan is designed for indoor use only.
- To Reduce The Risk Of Fire Or Electric Shock Do Not Use With An Extension Cord.
CAUTION
- Unplug the fan from the socket and clean it with a soft cloth.
- DO NOT immerse the fan.
- Fit the guard onto fan before starting up the fan.
- This fan is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the fan by a person responsible for their safety.
Supervise children to ensure they do not play with the fan.
ASSEMBLY INSTRUCTION
This fan is completely assembled upon delivery- no assembly required.
OPERATION INSTRUCTION
-
Place the fan on a safe, flat surface where it can fall or be pulled by the cord.
-
ADJUSTING AIR SPEED
Adiust the desired speed by rotatina the switch knob.
-
ADJUSTING INTERNAL ORBITAL OSCILLATION FEATURE
The internal orbital oscillation feature can be turned on by rotating the switch knob to the side sticked “Orbital Oscillation”. To disengage the oscillation feature,turn the switch knob to the side sticked “Orbital Oscillation Off”. -
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. Rotating the fan head upward serves to pull air from the floor and circulate it throughout the entire room.
CARE AND MAINTENANCE
Unplug the appliance before celaning. Don’t use any water for celaning metal surfaces. Slightly moisten a cloth and the wipe off the surfaces of the fan.In order to remove the dust from the grill,use a vacuum cleaner or remove the front grill by removing the securing screws on the edge of the grill. After cleaning, remount the grill.After doing this,fasten the screws on the edge of the grill.
1-YEAR LIMITED WARRANTY
The manufacturer warrants this product to be free from manufacturing defects
in the material and workmanship under normal use for a period of one year
after the date of purchase by the original purchaser.
This warranty does not cover transit damages. This warranty does not apply to
damages from accident, misuse, alteration of any kind to the fan or where the
connected voltage is more than above the nameplate voltage. This warranty does
not apply to the finish on any portion of the product. Servicing performed by
unauthorized persons shall render the warranty invalid. The warranty is not
responsible for damages of any kind, including accident and consequential
damages. Some states do not allow the exclusion or limitation of the
incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
REPLACEMENT PARTS LIST
Frequently Asked Questions (FAQ)
How do I clean the fan?
Unplug the fan, use a slightly moistened cloth to wipe surfaces, and avoid water on metal parts. Remove dust from the grill using a vacuum cleaner or by unscrewing and cleaning the front grill.
How do I adjust the airspeed and oscillation feature?
Rotate the switch knob to adjust airspeed 0 to 3 and turn on/off the internal orbital oscillation by selecting Orbital Oscillation or Orbital Oscillation Off.
What safety precautions should I follow?
Always unplug the fan before moving, cleaning, or adjusting settings. Avoid touching with wet hands and do not use if there is damage to the cord or plug.