BAnniXinG G-30 Clock Wireless Speaker User Manual
- June 12, 2024
- BAnniXinG
Table of Contents
Functions & Features 
Model: G—30
Read This Manual Carefull Before Use.
Function diagram
- DC 5V: 5V 1ADC charging input;
- Charging Indicator Port: Red light on while charging, and the red ight off when charging finished.
- TF: card Slot
- AM: 12 hour system, indicating morning ime,
- PM: 12 hour system, indicating afternoon time.
- Press and hold for 1.5s to start or tun off the speaker. Press to play and pause when playing music, and under FM mode, press the button for FM stations auto searching and save automatically.
- Press the button for last song or station, press and hold for volume down;
- Press the button for next song or station, press and hold for volume up;
- Mode Switching: The default mode sequency : Bluetooth – TF- FM radio – clock. Press and hold for setting hour system 12h and 24h;
- Press to switch the clock / alarm display on and off, press and hold to enter the clock / alarm setting mode, and double-click to switch the Chinese or English prompt tone;
- Press and hold for 1.5s to switch on or off the ambient light. Press to adjust the brightness of the display screen;
- Motion Sensor Function: when the speaker is turned on, when the TF card will pause playing for 10 minutes or the Bluetooth will not be connected for 10 minutes, the speaker will enter clock mode automatically. And further speaker will be turned off automatically after another 10 seconds. When the speaker detect human body movement, the speaker will be turned on automatically and enter clock mode, and automatically be turned off after 10 seconds;
- When turn on speaker, the default mode is not the mode of motion sensor and also not enter the motion sensor mode after power off. Motion sensor works when speaker turned on and switch to clock mode, and the speaker must enter sleep mode after 10 seconds.
Note: Item No.11 and 12 are applicable to model G-30 intelligent induction power saving version and Al voice version (Al voice operation manual is separately packed in the packaging box)
Function Operation
- Time setting: Under clock mode, press and hold the button “ ” to flash the “clock” LED light to be set, press “ , ” to adjust the clock hour, press ” ” to enter to “minute flash” minute setting, and press “ , ” to adjust the minutes. After setting, press and hold ” ” again or do not operate for 3 seconds, then the current setting will be automatically exited and saved.
- Alarm 1 setting: Under clock mode, press “ ” to switch alarm icon. When icon alarm 1 LED blinks, (Icon alarm 1 LED on means alarm 1 turned on). Press and hold “ ” to enter mode of alarm 1 hour blinking, press “ , ” to adjust alarm 1 hours, press “ ” to enter “minutes” flash to set minutes. After setting, press and hold “ ” again or do not operate for 3 seconds, then the current setting will be automatically exited and saved.(When both alarm 1/2 icons on or off, press and hold “ ” the button, speaker alarms can not be set, only one of each icons on, then can be set, otherwise, press andhold “ ” to set time only.)
- Alarm 2 setting: Under clock mode, press “ “to switch alarm icon. When icon alarm 2 LED blinks, (Icon alarm 2 LED on means alarm 2 turned on). Press and hold “ ” to enter mode of alarm 2 hour blinking , press “ , ” to adjust alarm 2 hours, press “ ” to enter “minutes” flash to set minutes. After setting, press and hold “Get” again or do not operate for 3 seconds, then the current setting will be automatically exited and saved.
- Alarm ON/OFF: Press “ ” to light on alarm 1 iconLED “ ” and alarm 1 working, light on icon alarm 2 “ ” to start alarm 2. Further press “ ” to light on “ “” ” to start 2 alarms. Further press “ ” to cancel both alarms.
Bluetooth connection operating instructions
- Turn on the power switch, and there is a voice prompt: “to enter Bluetooth mode”: turn on the Bluetooth setting of the mobile phone and search. When the search is successfully paired, the mobile phone will be displayed at the same time. It shows that “G-30”, “g-30q” or “g-30ai” is connected (paring name vary on the product version), and there is a voice prompt “pairing succeeded”. You can open the mobile phone to play songs. Disconnect Bluetooth, and the prompt tone is “Bluetooth disconnected”. (Note: G-30 is the standard version; G-30Q is the power saving version; G-30A1 is the Al voice version)
Trouble Shooting
- When the screen does not display and the speaker is playing normally, please check whether it has entered the motion sensor mode
- The speaker volume is low: first of all, we should check whether the volume of speaker is adjusted to the maximum. Generally, the default maximum volume of our products is level 30 or 16, and then check whether the mobile media volume is set to the maximum. The volume of speaker is adjusted synchronously with that of the Bluetooth mobile phone.
- When the screen blinks intermittently, or the sound volume is turned to the maximum, or it restarts or jumps to other modes without reason, it indicates that the power is almost exhausted. Please charge it in time. Some models will be accompanied by Chinese or English voice prompt “please charge when the battery is low”. When you do not charge, the speaker will be forced to automatically shut down to protect the battery life when the voltage continues to decrease.
- It is recommended to fully charge the battery before using it for the first time. If it is not used for a long time, please charge it every three months to avoid permanent damage caused by long-term battery power loss.
- If the speaker cannot be started due to no using for a long time, please use the special high current charger for mobile phone and the supporting high current charging cable for charging activation, and the power can be restored after charging for about 5 hours.
Features and Functions
- Support rechargeable battery
- Support clock display
- Support two groups of alarms
- Support FM receiving
- Support Bluetooth music playing
- Support TF card playing
- Support ambient light function.
Specifications
- Model: G-30
- RMS: 3W THD=1%
- Frequency Response: 80Hz-20KHz
- S/N ratio: 385dB
- Distortion: <0.5%
- Bluetooth Version: 5.0
- Speaker Driver: 40mm 40 2W
- Battery Type: 3.7V rechargeable battery
- Charge Input: DC 5V/1A
- Charge Port: TYPE-C
- Rated Power: 3W
- Product Size: L=118mm W=50.4mm
H=34.2mm f 0.5mm
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.