Dot Lighting 2BCMVFMWF 4 Inch Recessed LED Down Lights User Guide
- June 1, 2024
- Dot Lighting
Table of Contents
Dot Lighting 2BCMVFMWF 4 Inch Recessed LED Down Lights
Product Information
Specifications
- Brand: TM
- Model: Smart
Product Usage Instructions
Getting Started
To begin using the TM Smart, ensure it is fully charged by connecting it to
a power source using the provided cable.
Powering On/Off
To power on the device, press and hold the power button for a few seconds
until the screen lights up. To power off, repeat the process and select the
shutdown option on the screen.
Navigation
Use the touch screen to navigate through menus and options. Swipe left,
right, up, or down to move between screens or items.
Connectivity
The TM Smart can connect to Wi-Fi networks for internet access. Go to the
settings menu to set up and connect to a network.
Applications
Explore the pre-installed applications or download new ones from the
designated app store. Launch applications by tapping on their icons on the
home screen.
FAQ
-
How do I reset the device?
To reset the TM Smart, locate the reset button (usually a small hole) and use a paperclip to press and hold it for a few seconds until the device restarts. -
Can I expand the storage capacity?
A: Yes, you can expand the storage by inserting a compatible microSD card into the designated slot on the device.
Before you begin
- Make sure your mobile device is running the latest version of iOS or Android.
- Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.
Download
Download the Smart Life-Smart Living App from the App Store or Google Play on
your mobile device.
Register / Login
- Launch the Smart Life App from Tuya Inc.
- To register, enter your mobile phone number or email address. Create a password and log in.
Light it up
Install your smart bulb. The bulb will blink, which is normal since it is in
search mode. If the bulb goes on normally without blinking, it has already
been set up. You must close and open the switch 3 times in a row to enter
search mode. Follow the instructions on the application.
Add the Device
- Select the “+” symbol on the top right corner.
- Select “Smart Lighting” and then “Lighting
- Devices”. Follow the instructions to pair the device.
Setting up a third-party for your voice assistant
In the “Smart life” menu, go to the “ME” page followed by “More Service” mode
to help you select your voice assistant step by step.
From your Google Home application:
- In the home menu select the symbol “+” following “Set up device.”
- Find the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app.
You can now say commands such as:
“OK Google, dim the bedroom lights to 10%” “Ok Google, turn on / off the lights in my bedroom.”
Or;
From your Amazon Alexa application:
- In the “Skills” menu search for the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app. You can now say commands such as:
“Alexa, dim the lights of the kitchen to 10%.”
“Alexa, turn on / off the lights in my room.”
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Warning
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.