Dot Lighting 2BCMV-RTWF RTWF Smart Slim Panel User Guide
- June 1, 2024
- Dot Lighting
Table of Contents
Dot Lighting 2BCMV-RTWF RTWF Smart Slim Panel
Product Information
Specifications:
- Brand: TM
- Model: Smart
- Features: Smart technology
Product Usage Instructions
Getting Started:
Ensure the device is fully charged before first use. Press the power button to
turn on the smart device.
Connectivity:
Connect the smart device to your smartphone via Bluetooth to access additional
features and settings.
Functionality:
Explore the various functions of the smart device such as tracking,
notifications, and alarms. Refer to the user manual for detailed instructions
on each function.
Maintenance:
Keep the smart device clean and dry. Avoid exposing it to extreme temperatures
or water to ensure longevity.
FAQ:
Q: How do I reset the smart device?
A: To reset the smart device, locate the reset button and press it with a
small tool such as a paperclip.
Q: Can I replace the battery of the smart device?
A: The battery of the smart device is rechargeable and not intended to be
replaced by users. Contact customer support for battery replacement options.
Before you begin
- Make sure your mobile device is running the latest version of iOS or Android.
- Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.
Download
Download the Smart Life-Smart Living App from the App Store or Google Play on
your mobile device.
Register / Login
Launch the Smart Life App from Tuya Inc.
To register, enter your mobile phone number or email address. Create a
password and log in.
Light it up
Install your smart bulb. The bulb will blink,which is normal since it is in
search mode. If the bulb goes on normally without blinking, it has already
been set up. You must close and open the switch 3 times in a row to enter
search mode.
Follow the instructions on the application.
Add the Device
Select the “+” symbol on the top right corner.
Select “Smart Lighting” and then “Lighting Devices”. Follow the instructions
to pair the device.
Setting up a third-party for your voice assistant
In the “Smart life” menu, go to the “ME” page followed by “More Service” mode
to help you select your voice assistant step by step.
From your Google Home application:
- In the home menu select the symbol “+” following “Set up device.”
- Find the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app.
You can now say commands such as:
“OK Google, dim the bedroom lights to 10%” “Ok Google, turn on / off the lights in my bedroom.”
Or;
From your Amazon Alexa application:
- In the “Skills” menu search for the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app.
You can now say commands such as:
- “Alexa, dim the lights of the kitchen to 10%.”
- “Alexa, turn on/off the lights in my room.”
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including
interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Warning
This device complies with Innovation, Science, and Economic Development
Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
- this device may not cause interference, and
- this device must accent anv interference including interference that may cause undesired oneration of the device