RhinoCo TECHNOLOGY WGF-PTZC Watchguard Force PTZ Camera User Guide
- June 4, 2024
- RhinoCo TECHNOLOGY
Table of Contents
RhinoCo TECHNOLOGY WGF-PTZC Watchguard Force PTZ Camera
OVERVIEW
Box Contents
- 1x USB Power Supply
- 1x USB Power Cable
- 1x Mounting Bracket
- 1x Camera
Optional (not included):
- Micro SD card – used for recording
Setup (1)
Before beginning, it is recommended to configure the camera before installation.
- Download the “SmartLife” mobile application, available for both iOS and Android Devices. On iOS devices, it can be downloaded from the App Store, and for Android, the Play Store.
- Open the app once it is downloaded. You will be prompted to log in, or create a new account if you do not already have one. (Fig. 1)
- Once you have logged in, select the “Add Device” button. (Fig. 2)
- Select “Security & Video Surveillance”, and select “Smart Camera (Wi-Fi)”. (Fig. 3)
- If you have purchased an SD card (for recording footage), install it in the SD card slot on the camera. (Optional)
- Connect the camera to the included 5V power supply.
- Wait until the light on the camera is flashing red. If it does not flash red after 2 minutes, press and hold the Reset button until you hear 3 beeps. The Reset button is located next to the SD Card Slot.
- Tick the box on the screen and select “Next” on the mobile application, to confirm that the light is flashing red. (Fig. 4)
- Ensure your phone is connected to the Wi-Fi network that the camera will be connected to. Enter the Wi-Fi password of the network the camera will be connecting to, then select “Next”. You may be required to turn on your location settings. (Fig. 5)
- Hold the QR code that is displayed on the mobile application, up to the camera. Once the camera scans the code, a noise will be heard and the LED on the camera will begin flashing blue. (Fig. 6)
- Select “I heard a Prompt” on the mobile application. The camera will now get configured, this can take up to 2 minutes. If the camera fails to connect to the mobile application, repeat steps 6 onwards.
- Select “Done”. The camera will now be connected to the mobile application. (Fig. 7)
- Using the included mounting bracket, mount the camera to an indoor location.
Visit help.c5k.info for more information and support ALL-PACK1 Watchguard Force Camera Quick Start Guide – Version: WGF-PTZC-Q121
References
Read User Manual Online (PDF format)
Loading......