VOLLRATH R38736N Cafeteria Breath Guard Installation Guide
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH R38736N Cafeteria Breath Guard
Product Information
Specifications
- Product Name: Cafeteria Breath Guard
- Model: One Piece and Three Piece
- Manufacturer: Vollrath Company, L.L.C.
- Item No.: 2350030-01
Product Usage Instructions
One Piece Breath Guard Installation
- Ensure the breath guard uprights (A) are securely attached to the studs (B) using cap nuts (C).
- Repeat the installation process for all four uprights as shown in Figure 1.
Three Piece Breath Guard Installation
- Securely attach the breath guard uprights (A) to the studs (B) using cap nuts (C) as shown in Figures 1 and 2.
- Install the breath guard support tube (D) between the uprights (A) and secure with cap nuts (C). Repeat on the other side.
- Attach the one piece breath guard (E) to the mounting locations using screws (F) and cap nuts (C).
- Install the side breath protector (G) to the support tube (D) and secure with cap nuts (C). Repeat on the other side.
FAQ
-
Q: What should I do if I encounter cracking while tightening the cap nuts?
A: If you notice cracking while tightening the cap nuts, immediately stop and readjust to prevent further damage. Overtightening may cause plastic components to crack. -
Q: Can I install the breath guard support tube before attaching the uprights?
A: It is recommended to first attach the uprights to the studs before installing the breath guard support tube for proper alignment and stability.
Installation Instructions
One Piece cafeteria Breath Guard three Piece cafeteria Breath Guard
These instructions cover the installation of the one piece Cafeteria Breath
Guard and the three piece Cafeteria Breath Guard.
One Piece Breath Guard installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic
to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Three Piece Breath Guard installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE :
Use caution when tightening the cap nuts. Overtightening may cause the plastic
to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
The Vollrath Company, L.L.C.
1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.628.0830 Service Tel: 800.628.0832 FAX: 800.752.5620
Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.
Documents / Resources
|
VOLLRATH R38736N Cafeteria Breath
Guard
[pdf] Installation Guide
R38736N Cafeteria Breath Guard, R38736N, Cafeteria Breath Guard, Breath Guard,
Guard
---|---