CHAUVET H18 ILS LED Wash Effect Light Pack User Manual
- June 1, 2024
- Chauvet
Table of Contents
User Manual
H18 ILS LED Wash Effect Light Pack
Edition Notes
The SlimBANK H18 ILS User Manual includes a description, safety precautions,
installation, programming, operation, and maintenance instructions for the
SlimBANK H18 ILS as of the release date of this edition.
Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and SlimBANK H18 ILS are registered
trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet
Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks
of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all designs, text, and images are owned by Chauvet.
© Copyright 2024 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage, or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident, or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision; however, Chauvet
has no obligation to make, and does not commit to make, any such revisions.
Document Revision
Go to www.chauvetdj.com for the latest version.
| Revision | Date | Description |
|---|---|---|
| 1 | 1/2024 | Initial Release. |
Before You Begin
What Is Included
- SlimBANK H18 ILS
- Power cable
- Barn doors
- Quick Reference Guide
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet. Failure to report damage to the carrier immediately
may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of
delivery.
Text Conventions
| Convention | Meaning |
|---|---|
| 1–512 | A range of values |
| 50/60 | A set of values of which only one can be chosen |
| Settings | A menu option not to be modified |
| A key to be pressed on the product’s control panel | |
| ON | A value to be entered or selected |
Symbols
| Symbol | Meaning |
|---|---|
| Electrical warning. Not following these instructions may cause electrical |
damage to the product, accessories, or the user.
| Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause damage to
the product, or cause harm to the operator.
| Important installation or configuration information. The product may not
function correctly if this information is not used.
| Useful information.
Safety Notes
These Safety Notes include important information about installation, use, and
maintenance of the SlimBANK H18 ILS.
■ ALWAYS:
♦ Connect to a grounded circuit.
♦ Connect to operating voltages as specified on the product’s spec sticker.
♦ Disconnect from power before cleaning.
♦ Disconnect from its power source during periods of inactivity.
♦ Heed all restrictions and warnings on the spec sticker.
♦ Mount in a location with at least 20 in (50 cm) of ventilation.
♦ Replace the fuse with the same type and rating.
■ In the event of a serious operating problem, stop using immediately.
■ DO NOT:
♦ Open this product or attempt any repairs. It contains no user-serviceable
parts.
♦ Look at the light source when the product is on.
♦ Use if the power cord is crimped or damaged.
♦ Disconnect by pulling on the power cord.
♦ Allow flammable materials close to the product when it is operating.
♦ Touch the housing when it is on.
♦ Block any ventilation holes/slots in the housing.
♦ Connect to a dimmer or rheostat.
♦ Carry the product by its power cord.
♦ Operate in temperatures higher than 104°F (40°C).
♦ Expose to environments that exceed the Ingress Protection (IP) rating.
♦ Expose to rain or moisture.
♦ Use outdoors.
♦ Submerge.
Keep this User Manual for future use. If the product is sold to someone else,
be sure that they also receive this document.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the user.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Introduction
Product Overview
| # | Name |
|---|---|
| 1 | D-Fi USB port |
| 2 | Menu buttons |
| 3 | LED display |
| 4 | Microphone |
| 5 | Safety cable pass-through |
| 6 | Fuse holder |
| 7 | Power in |
| 8 | Power out |
| 9 | DMX in/out |
| 10 | IR sensor |
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product
Product Dimensions
Setup
AC Power
The SlimBANK H18 ILS has a fixed voltage power supply, and it can work with an
input voltage range of 100 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet,
and wiring), use the current value listed on the label affixed to the
product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under
normal conditions.
- Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
- Disconnect the product from power.
- Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
- Pry the fuse holder out of the housing.
- Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
- Insert the fuse holder back in place and reconnect power.
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
The product provides power linking via the outlet located in the back of the
product. See the diagram below for further explanation.
Power Linking Diagram
It is possible to power link up to 8
SlimBANK H18 ILS products on 120 VAC or up to 14 SlimBANK H18 ILS products on
230 VAC.
The power linking diagram corresponds to the North American version of the
product ONLY!
If using the product in other markets, you must consult with the local Chauvet
distributor as power linking connectors and requirements may differ in your
country or region.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The SlimBANK H18 ILS may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
- Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
- Make sure adequate ventilation is provided around the product.
- Make sure that the structure and attachment points can support the weight before hanging the product (see the Technical Specifications)
- When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
- When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
- When power linking multiple products, mount the products close enough for power linking cables to reach.
- When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
Operation
Control Panel Operation
To access the control panel functions, use the four buttons located around the
display. Please refer to the Product Overview to see the button locations on
the control panel.
| Button | Function |
|---|---|
| Press to find an operation mode or to back out of the current menu |
option
Menu Map
Refer to the SlimBANK H18 ILS product page on www.chauvetdj.com for the latest menu map.
| Mode | Programming Levels | Description |
|---|---|---|
| DMX | 6Ch | d 1–507 |
| 8Ch | d 1–505 | 8-channel DMX mode |
| 12Ch | d 1–501 | 12-channel DMX mode |
| 22Ch | d 1–491 | 22-channel DMX mode |
| ILS | iLS | iLS1–4 |
| Static Color | C– | C 1–23 |
| Program | P– | P 1–14 |
| Speed | S– | S. 1–100 |
| Sound- Active | Snd | Snd |
| Sensitivity | SEnS | u 0–100 |
| Custom Color and Strobe | u– | r. 0–255 |
and UV for a custom static color
G. 0–255
b. 0–255
A. 0–255
W. 0–255
P. 0–255
S. _| S. 0| Strobe: off
S. 1–99| Strobe: slow to fast
S.100| Strobe: sound-active
Dimmer Speed| diN| OFF| Sets the dimmer speed
diN1
diN2
diN3
Reset| SEt| rESt| Reset to factory default settings
Infrared| ir| OFF| Enables/disables infrared control
ON
DMX Configuration
The SlimBANK H18 ILS works with a DMX controller. Information about DMX is in
the Chauvet DMX Primer, which is available from the Chauvet website
chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Personality and Starting Address
The SlimBANK H18 ILS uses up to 22 DMX channels in the 22Ch mode, which
defines the highest configurable address to 491.
When selecting a starting DMX address, always consider the number of DMX
channels the selected DMX mode uses. If the starting address is set too high,
access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from
www.chauvetdj.com.
To select the personality and starting address, do the following:
- Press
- Press
. - Use
or to select the starting address, from d 1–513. - Press
.
D-Fi USB Connectivity
The SlimBANK H18 ILS is able to become a D-Fi wireless receiver/transmitter
with the use of the D-Fi USB from Chauvet DJ. Simply set the product’s DMX
Personality and DMX Address, set the DIP switch
D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port.
Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual
display control / menu buttons will be unavailable until you unplug the D-Fi
USB. The priority levels are:
- D-Fi USB
- Wired DMX
- Manual Digital Display/Menu Buttons
D-Fi USB Compatibility
The D-Fi USB can receive a DMX signal from the D-Fi Hub, the FlareCON Air 2,
and other D-Fi USB products.
D-Fi USB Configuration
- Set the DMX Personality and DMX address on the SlimBANK H18 ILS.
- Use the Chart provided to set BOTH:
• the Channel, and then
• The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
D-Fi USB DIP Switch Channels
DMX Channel Assignments and Values
6Ch| 8Ch| 12Ch| 22Ch| Function| Value|
Percent/Setting
---|---|---|---|---|---|---
–| 1| 1| –| Dimmer| 000 255| 0–100%
1| 2| 2| –| Red| 000 255| 0–100%
–| –| –| 1| Red 1| 000 255| 0–100%
2| 3| 3| –| Green| 000 255| 0–100%
–| –| –| 2| Green 1| 000 255| 0–100%
3| 4| 4| –| Blue| 000 255| 0–100%
–| –| –| 3| Blue 1| 000 255| 0–100%
4| 5| 5| –| Amber| 000 255| 0–100%
–| –| –| 4| Amber 1| 000 255| 0–100%
5| 6| 6| –| White| 000 255| 0–100%
6| 7| 7| –| UV| 000 255| 0–100%
–| –| –| 5| White 1| 000 255| 0–100%
–| –| –| 6| UV 1| 000 255| 0–100%
–| –| –| 7| Red 2| 000 255| 0–100%
–| –| –| 8| Green 2| 000 255| 0–100%
–| –| –| 9| Blue 2| 000 255| 0–100%
–| –| –| 10| Amber 2| 000 255| 0–100%
–| –| –| 11| White 2| 000 255| 0–100%
–| –| –| 12| UV 2| 000 255| 0–100%
–| –| –| 13| Red 3| 000 255| 0–100%
–| –| –| 14| Green 3| 000 255| 0–100%
–| –| –| 15| Blue 3| 000 255| 0–100%
–| –| –| 16| Amber 3| 000 255| 0–100%
–| –| –| 17| White 3| 000 255| 0–100%
–| –| –| 18| UV 3| 000 255| 0–100%
–| 8| 8| –| Strobe| 000 010| No function
011 255| Strobe, slow to fast
–| –| 9| –| Color Macros and Color Temperature| 000 010| No function
011 200| Color macros
201 205| Color temperature 1
206 210| Color temperature 2
211 215| Color temperature 3
216 220| Color temperature 4
221 225| Color temperature 5
226 230| Color temperature 6
231 235| Color temperature 7
236 240| Color temperature 8
241 245| Color temperature 9
246 250| Color temperature 10
251 255| Color temperature 11
–| –| 10| 19| Automatic program| 000 010| No function
---|---|---|---|---|---|---
011 028| Automatic program 1
029 045| Automatic program 2
046 062| Automatic program 3
063 079| Automatic program 4
080 096| Automatic program 5
097 113| Automatic program 6
114 130| Automatic program 7
131 147| Automatic program 8
148 164| Automatic program 9
165 181| Automatic program 10
182 198| Automatic program 11
199 215| Automatic program 12
216 232| Automatic program 13
233 250| Automatic program 14
251 255| Sound-active program (cycles P 1-14)
–| –| 11| 20| Program speed (when Ch. 7 is 011 250)| 000 255| Automatic
program speed, slow to fast
Sound sensitivity (when Ch. 7 is 251 255)| 000 010| Sound sensitivity off
011 255| Sound sensitivity, low to high
–| –| –| 21| Dimmer| 000 255| 0–100%
–| –| –| 22| Strobe| 000 010| No function
011 255| Strobe, slow to fast
–| –| 12| –| Dimmer speed| 000 051| Dimmer speed set from display menu
052 101| Dimmer speed mode off
102 152| Dimmer speed mode 1 (fast)
153 203| Dimmer speed mode 2 (medium)
204 255| Dimmer speed mode 3 (slow)
Standalone Configuration
Set the product in one of the standalone modes to control without a DMX
controller.
Never connect a product that is operating in any standalone mode to a DMX
string connected to a DMX controller. Products in standalone mode may transmit
DMX signals that could interfere with the DMX signals from the controller.
Static Color
To fun the SlimBANK H18 ILS with a preset static color, do the following:
- Press
- Press
. - Use
or to select a static color, from C 1–19. - Press
.
Automatic Programs
To run the SlimBANK H18 ILS with an automatic program, do the following:
- Press
- Press
. - Use
or to select a program, from P 1–14. - Press
.
Program Speed
To set the program speed of the SlimBANK H18 ILS, do the following:
- Press
- Press
. - Use
or to increase or decrease the speed, from S. 1–100. - Press
. The display will return to the selected program.
Sound-Active Mode
To run the SlimBANK H18 ILS in sound-active mode, do the following:
- Press
- Press
.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To set the sound sensitivity on the SlimBANK H18 ILS, do the following:
- Press
- Use
or to increase or decrease the program speed, from u 1–100. - Press
. The product will return to sound-active mode.
Custom Color and Strobe
To run the SlimBANK H18 ILS with a custom color and strobe speed, do the
following:
-
Press
-
Press
and one of the following will show on the display:
• r. (red),
• G. (green),
• b. (blue),
• A. (amber),
• W. (white),
• P. (ultraviolet), or
• S. _ (strobe) -
Use
or to increase or decrease the value, from 1–255 (for a color) or from 0–100 (for the strobe speed: 0 is off, 1–99 is slow to fast, 100 is sound-active). -
Press
. to cycle through the options. -
Repeat steps 3-4 until the product is set as desired.
Settings Configuration
Dimmer Speed
To set the dimmer speed of the SlimBANK H18 ILS, do the following:
- Press
- Press
. - Use
or to select the speed, from oFF (instant/linear dimmer), diN1 (fast), diN2 (medium), or diN3 (slow). - Press
.
Factory Reset
To reset the SlimBANK H18 ILS to factory default settings, do the following:
- Press
- Press
. - Use
or to select rESt. - Press
.
IRC-6 Infrared Remote Control
The SlimBANK H18 ILS is compatible with the IRC-6 infrared remote control from
Chauvet. To run the
SlimBANK H18 ILS in IR mode, follow the instructions below.
- Press
- Press
. - Use
or to select ir. - Press
. - Use
or to select from oFF or on. - Press
.
IRC-6 Operation
Automatic Programs
To run an automatic program with the IRC-6:
- Press
on the IRC-6 (or press to select P 14). - Press <+> or <–> to select the program.
To set the program speed with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the speed.
Sound-Active Mode
To run the sound-active mode with the IRC-6, press
To set the sound sensitivity with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the sensitivity.
Manual Mode
To mix a custom color with the IRC-6:
- Press
on the IRC-6. - Press
(red), (green), (blue), (amber), (white), or (ultraviolet) to select which color to edit. - Press <+> or <–> to increase or decrease the value of the selected color.
To select a preset color with the IRC-6:
- Press
on the IRC-6. - Press <P/UV>,
, or <0>–<9> to select the color.
Strobe
To adjust the strobe rate with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the strobe rate.
- Press
again to turn off the strobe, or set the strobe to 0.
Black Out
To black out the lights with the IRC-6, press
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is
activated. If the product does not respond when a button is pressed, try
pressing
Black Out may have been activated.
Wired Master/Slave Mode
The Master/Slave mode allows a single SlimBANK H18 ILS product (the “master”)
to control the actions of one or more SlimBANK H18 ILS products (the “slaves”)
without the need of a DMX controller. The master product will be set to
operate in either standalone mode or with the IRC-6, while the slave products
will be set to operate in slave mode. Once set and connected, the slave
products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
- Press
- Press
. - Use
or to select d 1. - Press
. - Connect the DMX input of the first slave product to the DMX output of the master product.
- Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
- Finish setting and connecting all the slave products.
Master product:
- Set the master product to operate in standalone mode or with the IRC-6.
- Make the master product the first product in the DMX daisy chain.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.
D-Fi USB Master/Slave Mode
The D-Fi USB allows a single SlimBANK H18 ILS product (the “master”) to
control the actions of one or more SlimBANK H18 ILS products (the “slaves”)
without the need of a DMX controller or DMX cables. The master (transmitter)
product will be set to operate in standalone mode or with the IRC-6, while the
slave (receiver) products will be set to operate in DMX mode. Once set and
connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
- Press
- Press
. - Use
or to set the starting address to d 1. - Press
. - Set the D-Fi USB to receive on a specific channel, 1–22.
- Plug in the D-Fi USB.
- Finish setting and connecting all the slave products.
Master product:
- Set the master product to operate in standalone mode.
- Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
- Plug in the D-Fi USB.
• All products must be set to the same DMX personality, DMX address, and D-Fi channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation because the controller may interfere with the signals from the master.
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the
GigBAR MOVE+ILS: Modes
1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4
synchronize with side 2 of the GigBAR MOVE+ILS. When linked, effects will sync
with the most similar effect on the selected side of the GigBAR MOVE+ILS:
Kinta effects will sync with one of the kintas, wash effects will sync with
one of the pars, etc. This product will synchronize with the par on the
selected side of the GigBAR MOVE+ILS.
To set the SlimBANK H18 ILS to respond to an ILS signal:
- Press
- Press
. - Use
or to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2). - Press
.
Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This
can lead to reduction of the light source’s life and/or mechanical wear. To
maintain optimum performance and minimize wear, clean all lighting products at
least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency. To clean the
product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Technical Specifications
Dimensions and Weight
| Length | Width | Height | Weight |
|---|---|---|---|
| 8.2 in (208 mm) | 14 in (355 mm) | 2.2 in (55 mm) | 6 lb (2.7 kg) |
Note: Dimensions in inches are rounded.
Powerr
Power Supply Type| Range| Voltage Selection
Switching (internal)| 100 to 240 VAC, 50/60 Hz| Auto-ranging
Parameter| 120 V, 60 Hz| 230 V, 50 Hz
Consumption| 68 W| 67 W
Operating Current| 1:00 AM| 0.5 A
Power linking current (products)| 8 A (8 products)| 8 A (14 products)
Fuse| T 2 A, 250 V| T 2A, 250 V
Power I/O| U.S./Worldwide| UK/Europe
Power input connector| IEC| IEC
Power output connector| Edison| IEC
Power Cord plug| Edison (U.S.)| Local Plug
Light Source
Type| Color| Quantity| Power| Current| Lifespan
LED| hex-color RGBAW+UV| 18| 6.2 W| 1.6 A| 50,000 hours
Photometrics
Strobe Rate| Beam Angle| Field Angle| Illuminance
0 to 20 Hz| 27°| 43°| 3,111 lux @ 2 m
Thermal
Maximum External Temperature| Cooling System
104 °F (40 °C)| Convection
DMX
I/O Connector| Channel Range
3-pin XLR| 6, 8, 12 or 22
Ordering
Product Name| Item Code| UPC Number
SlimBANK H18 ILS| 10032293| 7.81462E+11
Contact Us
| General Information | Technical Support |
|---|
Chauvet World Headquarters
Address: 3360 Davie Rd., Suite 509
Davie, FL 33314
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084| Voice:
844-393-7575
Fax: 954-756-8015
Email: chauvetcs@chauvetlighting.com
Website: www.chauvetdj.com
Chauvet U.K.
Chauvet U.K.
Address: Pod 1 EVO Park
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110| Email:
UKtech@chauvetlighting.eu
Website: www.chauvetdj.eu
Chauvet Benelux
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97| Email:
BNLtech@chauvetlighting.eu
Website: www.chauvetdj.eu
Chauvet France
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France
Voice: +33 1 78 85 33 59| Email:
FRtech@chauvetlighting.fr
Website: www.chauvetdj.eu
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany
Voice: +49 421 62 60 20| Email:
DEtech@chauvetlighting.de
Website: www.chauvetdj.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010| Email:
servicio@chauvet.com.mx
Website: www.chauvetdj.mx
Warranty & Returns
For warranty terms and conditions and return information, please visit our
website.
For customers in the United States and Mexico: www.chauvetlighting.com
/warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-
registration.
SlimBANK H18 ILS User Manual Rev. 1
Documents / Resources
|
CHAUVET H18 ILS LED Wash Effect Light
Pack
[pdf] User Manual
H18 ILS LED Wash Effect Light Pack, H18 ILS, LED Wash Effect Light Pack,
Effect Light Pack, Light Pack, Pack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>