BAPI BA-WSK Weather Shade Kit Instructions
- June 11, 2024
- BAPI
Table of Contents
BAPI BA-WSK Weather Shade Kit Instructions
Overview & Identification
External temperature and humidity sensors are affected by solar heat gain. The BAPI Weather Shade effectively reduces the solar heat gain, improving the accuracy of the sensor.
The pre-assembled Weather Shade Kit includes a shade and din rail bracket, two capped mounting tubes, one adjustable clamp and one adjustable clamp with bracket.
Mounting
Parts List
- Mount Temp/Humidity sensor on a north facing wall.
- Screw Part B to top of enclosure. See note* below.
- Place Part E on Part B with screw facing up and tighten hose clamp. Then screw on Part C to top of Part B.
- Place Part F on bottom probe with hose clamp screw facing up and tighten hose clamp screw.
- Line up bracket to mounting surface and tighten screw so bracket is flush with mounting surface.
- Obtain Part A and slide DIN rail through inner slots of Parts E and F and push until it stops.
- Screw Part D on to bolt of cone (Part A) and fasten to Part F.
*Note: Part G provided if threads do not exist in the enclosure.
**Note: If Weather Shade is swiveling, refer to Step 5 and ensure bracket is flush with mounting surface.
Fig. 1: Mounting to the BAPI-Box 2 & BAPI-Box outdoor air sensors
Specifications
Specifications subject to change without notice.
Diagnostics
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI
54631 USA
Tel:+1-608-735-4800 •
Fax+1-608-735-4804 •
E-mail:sales@bapihvac.com •
Web:www.bapihvac.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>