DY-22-018 Dayan Smart Cooking Robot

Product Information

Specifications

• Model: DY-22-018
• Power: 3500W
• Voltage: 220V
• Usage: Catering stores and households

Product Features

The Dayan intelligent cooking robot DY-22-018 is a versatile
fryer suitable for use in catering stores and households. It comes
with various features to enhance your cooking experience.

Product Introduction

Please refer to the instructions below for detailed information
on using the product efficiently and safely.

Name and Usage of Each Component

• Translucent cover plate
• Auxiliary material box
• Glass cover plate
• Panel glass Control screen
• Translucent observation window
• Side plate pulley

Usage – Installation

1. Place the machine smoothly and clean the inside before
   use.

2. Use a standard 220V, 3500W three-hole socket for power
   supply.

3. Connect inlet pipe and main drainage pipeline as per
   instructions.

4. Ensure stable network connectivity during operation.

Usage – Fried Vegetables

1. Click on Stir fry on the homepage.
2. Select the dish from Recipe Selection page.
3. Adjust taste preferences and start cooking.
4. Complete stir fry and pour out the dish.

Usage – Edit Menu

1. Edit recipes by adding new menus.
2. Set dish names, classifications, and cooking actions.

Usage – Cleaning

1. Clean daily by following the cleaning instructions
   provided.

2. Rotate and remove the inner container for thorough
   cleaning.

FAQ

Q: Can I use this product in a commercial kitchen?

A: Yes, this fryer is suitable for use in catering stores and
commercial kitchens.

Q: How often should I clean the pot?

A: The inner container of the pot needs to be cleaned daily for
optimal performance.

Operation Instruction Dayan intelligent cooking
robot DY-22-018
This figure is for reference only Please read this instruction manual carefully before
using the product and keep it properly.

catalogue
1. Characteristic products
2.Name and usage of each component
3. Product specification table
4. Safety precautions
5. Troubleshoot the fault
6. Packing details 7. stir-frying machine products of harmful substances restricted use identification table 8. stir-fry machine food contact material information 9. After-sales service

Product Features

Product Introduction

This fryer is suitable for use in catering stores and households. Please refer to the instructions for specific usage

Please note:
1. All contents in this manual have been carefully verified. If there are any printing errors or misunderstandings in the content, you can consult our company.
2. The product is subject to updates without prior notice.

Name of each part and user

Name of each
part

Translucent cover plate Auxiliary material box Glass cover plate Panel glass Control screen

Panel glass

Translucent observation window

Side plate

pulley

Usage – Installation
Place the machine smoothly and clean the inside of the machine before use.
When installing the power supply, use a standard three hole socket with a voltage of 220V and a maximum power of 3500W.
Before first use, connect the inlet pipe, which has a 4-point threaded interface and a length of approximately 1 meter. The distance between the inlet pipe and the machine should be less than 1 meter
Connect the main drainage pipeline, with the interface no higher than 150mm from the ground (it is recommended to be flush with the ground), the diameter of the drainage pipeline no less than 100mm, and the diameter of the machine drainage pipeline 40mm;
When in use, the operation site has a stable network environment to maintain real-time connectivity of the robot.

Usage – Fried Vegetables
1Click on “Stir fry” on
the homepage
2Enter the “Recipe
Selection” page and select the dish you want to stir fry
3Enter the “Taste
Adjustment” page, select your personal taste, and click “Start Cooking”
4After the stir fry is
completed, enter the pour page and click the “pour” button after placing the plate

Usage – Edit Menu
1Click on “Edit Recipe”
on the homepage
2Enter the menu editing
page and click the “Add” button to add a new menu.

Usage – Edit Menu
3Set dish names and
classifications
4There are 5 actions
that can be set during the cooking process: heat adjustment, adding ingredients, adding seasoning, injecting water, and adding oil. You can arrange them according to the cooking steps and save them after setting them up

Usage – Cleaning
1Click on “Clean” on the
homepage
2For the first use every
day, click on “boiling water to wash the pot”. After using the machine on that day, you can choose other cleaning buttons corresponding to the machine components for cleaning.

Usage – Cleaning
3The inner container of the
pot needs to be cleaned daily. Rotate the pot container in the “on” and “off” directions indicated on the pot body to remove the entire pot body for cleaning. After cleaning, place the tail of the pot facing the slot squarely and turn it in the “off” direction.
4When the work is completed
on that day, click on the “Shutdown” icon, wait for 60 seconds for the interface to display “You can turn off the power”, and turn off the main switch and power switch of the machine.

Product specifications

model

DY-22-018

rated voltage

AC220V

Rated frequency

50Hz

rated power

3500W

rated capacity Inner gallbladder
caliber Product weight

12L 330mm 140kg

Product size

715mm x643mm x 1160mm

Electrical schematic diagram

Safety precautions

l This note is an important safety aspect to prevent harm, damage, and other harm to you and others. Please be sure to comply with it

l Ignoring the markings in the table below and using the product incorrectly may result in personal injury or material damage.

l The following are the meanings of the symbols in this article

Absolute Prohibited Action Item

Action items must be followed

Daily attention operation items

dangerous

Children are prohibited from operating alone to avoid electric shock, burns, or other injuries

It is prohibited to insert foreign objects such as metal shavings, iron wires, needles, etc. into the interior or gaps of the product, as this may cause electric shock or abnormal operation

warn

When not in use, to prevent leakage or accidental startup, please be sure to unplug the power plug.
Please do not place this product on uneven ground to avoid injury accidents and property damage.

Do not place this product directly on fire or anywhere near heat or ignition sources, otherwise the product may be damaged or malfunction, or even become dangerous.
Do not let the pot dry burn, as dry burning can damage the pot body and other components.

pay attention to

Please use a power socket with a rated current of 10A or above and an AC voltage of 220V separately to avoid accidents such as fire and electric shock.
If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer and its maintenance department or similar professionals.
This product is a Class I appliance, and the socket grounding wire needs to be well grounded.
During product operation, high temperatures and steam may be generated. Please do not approach the exhaust hole to prevent burns.
Do not collide or heat the inner liner directly on other heat sources, such as gas stoves, as it may deform easily.
Do not put any bagged, canned or bottled articles into the product Negage, otherwise there is an explosion risk.

Do not insert or unplug the plug with wet hands to avoid electric shock. When unplugging the plug, it is necessary to hold the plug handle and not pull the power cord, otherwise it may damage the power cord.
Before use, it is necessary to ensure that the power cord is reliably connected to the socket, otherwise poor contact may cause damage to the device, leading to hazards such as short circuits or fires.
Individuals equipped with pacemakers or users of hearing aids or cochlear implants should consult authorized medical personnel and refer to the instructions provided by the medical device when using this product. This product is prohibited from washing and soaking with water to avoid electric shock or short circuit.
It is strictly prohibited to use inner liners that are not included with this product to prevent overheating and damage to components.
This product is an automatic fryer. Do not use tools with sharp edges (such as steel wire balls) to shovel the inner container to avoid damaging the inner layer and causing the pot to burn.

Faults and handling

methods

Fault phenomenon

Fault cause

processing method

Plug in the power cord, the device is
not powered on
Abnormal water supply alarm
Food cooking paste pot
Poor cooking of food

Plug not inserted and other reasons
Blockage of water inlet pipe and other reasons
Improper placement ratio of ingredients or seasoning or excessive
firepower setting
Placing too many ingredients or
seasonings or having too little firepower

Tighten the plug/contact the after-sales service
department of Dayan for maintenance
Check the water inlet pipeline/contact the
after-sales service department of Dayan for
maintenance
Adjusting the proportion and firepower of ingredients
Increase firepower and stir frying time

Abnormal vegetable pouring

Door not tightly closed or dishes not placed

Close the cabinet door tightly and place the
dishes in place

Abnormal flipping of the vegetable box

Dish box positioning sensor failure

Contact Da Yan for after-sales service and
repair

Abnormal

The positioning

Contact Da Yan for

position of frying sensor of the frying after-sales service and

pan

pan is faulty

repair

Adjust the recipe

Excessive smoke from firepower/check the

Maintenance precautions
1After each use, take out the used clean
vegetable box and thoroughly clean the robot’s peripheral surface, pot body periphery, vegetable hopper, receiving table, leakage grid, etc. to prevent the breeding of bacteria
2When cleaning robots with cleaning agents,
avoid using violent cleaning to avoid damaging components. When cleaning, a sponge or soft cloth containing a small amount of neutral detergent (non corrosive detergent) can be used to wipe.
3Ensure that the water inlet and outlet
remain unobstructed and not blocked
4When not in use for a long time, the
power plug must be unplugged to keep the robot fully dry.

warranty card

Product related information
(filled in by the user)

User Name

Telephone

Address

device ID

purchasing date

Invoice number

Fault cause

Handling situation

repair date

Signature of maintenance personnel

Dear user Thank you for choosing our company’s products! For your safe, convenient use and reasonable maintenance, please read this user manual carefully before use. Please follow the operating procedures and precautions in this manual. If the product malfunctions, please do not disassemble and repair it yourself or entrust it to an unauthorized repair department of our company for repair. Please contact our relevant staff. Fill out the warranty card information and we will be happy to serve you.

after-sale service
Term of service
1. The warranty period of this product is 1 year. The
validity period is calculated from the date of invoice issuance;
2. The purchase invoice serves as a proof of product
warranty.
Non San Bao scope
1. Improper handling, use, storage, and maintenance by
users/human damage;
2. Damage caused by installation or maintenance at a
repair point not designated by our company (including user self installation, disassembly, or maintenance);
3. Damage caused by using gifts and accessories that are not standard with our company’s products
4. Without a valid invoice or proof of purchase, and
unable to prove that it is within the warranty period;
5. The invoice does not match or is altered with the
actual item;
6.Damage caused by uncontrollable natural disasters;
7. Exceeding the warranty period;
8.For those beyond the scope of on-site service
provided by Da Yan and those required by customers to come to their doorstep

Dongguan Dayan Automation Equipment Co., Ltd
Dayan Jiazhun Intelligent Industrial Park, Gaopu Town, Dongguan City
Service hotline: 400-770-8989

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>