QAZQA 103103 Floor Lamp Instruction Manual
- June 4, 2024
- QAZQA
Table of Contents
Glan CL Gold 60
103103 Floor Lamp
Instruction Manual
103103 Floor Lamp
Final Product
MANDATORY SAFETY INSTRUCTION
Due to the fabrication system of these mesh lamps, there may be some sharpness at some parts, kindly take precautions while assembling the lamp.
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take into account the minimum separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Take note of the symbols when connecting wires: N =Neutral L = Live =Earth
- Meaning of symbols:
For indoor use only,
where direct contact with water is impossible
This icon indicates
the level of water-proof and dust-proof
Protection Class I:
the fitting must be earthed
Protection Class II:
the fitting is doubled insulated and does not require earthing
Protection Class
Ill: the fitting is low voltage
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire
Strip the wire to
the indicated length (mm); different items require different length
Connect using the
specified cable; different items require different cables
The type of lamp
and maximum size and wattage indicated in each lighting unit must not be
exceeded; different items require different kinds of light sources with
different bulb icons
The armature is
designed to work only with the indicated voltage. Different items require
different working voltages.
The luminaire can be used in combination with a dimmer
The reference light
angle and light space of the luminaire
This luminaire
cannot be disposed of together with normal domestic waste in standard rubbish
can, but you have to bring it to a staging area for electrical waste
fitting B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.gazga.n1