LUDOMIDE CFL-1164-02 52 Inch Ceiling Fan with Lights Instruction Manual
- June 1, 2024
- LUDOMIDE
Table of Contents
LUDOMIDE CFL-1164-02 52 Inch Ceiling Fan with Lights
Product Information
Specifications
- Model: CFL-1164-02
- Control: APP Control Applicable
- Number of Fan Blades: 3
- Number of Light Bulbs: 1 LED light
- Remote Control: Included
FAQ
- Q: What should I do if I encounter issues during installation?
- A: If you face any problems during installation, please contact our customer care with screenshots of your order page and a detailed description of the issue.
Packing List
| Part | Description | Quantity |
|---|---|---|
| A | Mounting Bracket | 1 |
| B | Driver | 1 |
| C | DC Motor | 1 |
| D | Motor Cover | 1 |
| E | Fan blade | 3 |
| F | Iron basin | 1 |
| --- | --- | --- |
| G | LED light | 1 |
| H | Lamp shade | 1 |
| I | Remote Control | 1 |
| J | Remote Holder | 1 |
Installation kit
| Part | Description | Quantity |
|---|---|---|
| AA | Fan blade Screw | 6 |
| BB | Wire nut | 3 |
| CC | Pair of Gloves | 1 |
| DD | Washer | 2 |
| EE | Wood Screw (optional) | 2 |
| FF | Machine Screw | 2 |
Note:
- Some extra hardware may be included. The quantity listed above is the number required for installation.
Safety Rules
- Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
- A qualified licensed electrician is required for the installation.
- The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
- The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
- Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
- Do not place any objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
- After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
- Electrical diagrams are reference only, different fan light may have different light shade and bulbs.
- Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
Warning:
- To reduce the risk of personal injury, use only the two steel screws and washers provided with the outlet box for mounting to the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and need to be replaced, consult a qualified electrician if in doubt.
- To reduce the risk of fire, electric shock or person injury, mount fan to outlet box marked “acceptable for fan support”.
- To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
Installation Preparation
Tools You Need
If mounting to a support structure, you will also need the optional tools.
What to Expect with Your Installation
Installation Instructions
Installation Step 1: (Mount and Wire)
Installing the Bracket
- Step 1. Pass the power wires through the center hole in the mounting bracket.
- Step 2. Secure the mounting bracket to the ceiling outlet box or solid wood structure with the screws and washers provided.
Installing the Motor
- Step 1. Fix the motor to the bracket using the fixing screws.
- Step 2. Connect the wires from the fixture to the house supply wires with wire nuts, ground wire (green, green/yellow, or bare copper) to ground wire, neutral wire (white or blue) to neutral wire, and hot wire (black or brown) to the hot wire. Wrap the connection with electrical tape.
Fix the Motor Cover
- Step 1. Use the Motor Cover to cover the Bracket as indicated by the arrow.
- Step 2. Rotate the motor cover clockwise and lock it.
Assemble the Blades
- Step 1. Connect the fan blades to the motor with screws.
Note:
- Make sure to assemble the blades in sequence and fasten the screws with equal force.
- The fan blades have both sides, please follow the instructions on the fan blades for installation.
Install and Wire the Light
- Step 1. Install the lamp panel and lamp shade in the order of disassembly.
- Step 2. Connect the wire terminal to the interface on the light panel.
- Step 3. Rotate the lampshade clockwise to secure it to the lamp panel.
Installation Step 4 (Install the Remote Holder)
- Insert 2 batteries before using: AAA 1.5V battery x 2pcs (not included)
- Install the remote holder onto the wall with screws.
Remote Control Instructions
- ①: Turn off power.
- ②: Natural wind, fan speed will change automatically with this function.
- ③⑤⑪⑫⑬⑭: Turn on the fan on 1/2/3/4/5/6 speed.
- ④: Turn off the fan.
- ⑩: Fan moves forwards or reversely.
- ⑥⑦: Adjust the brightness of the light.
- ⑮⑰: Adjust the light color temperature.
- ⑯: Turn on / off the light.
- ⑧: Night mode, dim the lights.
- ⑨: Quick switch of the light color: warm white→cool white→daylight white.
- ⑱: 2H for timing the fan.
REMOTE SIGNAL PAIRING: If the remote control looses signal of the fan, press and hold the button ⑯ at the very beginning after it’s turned on from wall switch. After the fan light flashes or beeps, it’s done.
APP Control Instructions
Install the “FanLamp Pro” app from Google Play, Apple App Store, or other app
stores by scanning the QR code or searching for the app name.
Ensure that your phone is connected to the internet and Bluetooth enabled.
Trouble Shooting
- Fan doesn’t work
- Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
- Check the remote control battery (not included in this package).
- Check the circuit breaker to ensure the power is on.
- Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
- Lights Do Not Light Up / Flicker / Noisy Operation
- Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
- Check your power and switch to make sure it’s power on.
- Noisy Operation
- Re-tighten all screws on bracket.
- Check to see if any of the blades are cracked. If so, replace the blades.
- Remote does not work
- Make sure the battery is installed correctly.
- Pair the remote control again.
- Install 2 new batteries.
Cleaning And Ordering Parts
Clean And Care
- To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolor the finish of the fixture.
- Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
Ordering Parts
- Keep this manual for future reference, and in case replacement parts are needed.
- Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.
Scan for Installation Video
APP Control Applicable
Documents / Resources
|
LUDOMIDE CFL-1164-02 52 Inch Ceiling Fan with
Lights
[pdf] Instruction Manual
CFL-1164-02 52 Inch Ceiling Fan with Lights, CFL-1164-02, 52 Inch Ceiling Fan
with Lights, Ceiling Fan with Lights, Fan with Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>