LUDOMIDE CFL-1105-04 Ceiling Fan with Lights Instruction Manual

LUDOMIDE CFL-1105-04 Ceiling Fan with Lights

Product Specifications

• Model No.: CFL-1105-04
• Control: APP Control Applicable

Installation Preparation

Before beginning the installation process, ensure you have the following tools ready:

• Ladder
• Pliers
• Wire Strippers
• Screwdrivers
• Power Drill (optional)
• Drill Bit (optional)

If mounting to a support structure, you may need additional tools as well.

What to Expect with Your Installation

• The fan must be secured to the building structure or afan-rated outlet box.
• Ensure there is a minimum of 30 inches from the blade tip to the nearest wall or obstruction.
• Maintain a distance of 7 feet from the bottom edge of the blade to the floor.
• Assess the installation location carefully.
• Consider having a friend assist you during installation.
• Note that angled ceilings are not supported.

Installation Steps

Step 1: Mount the Bracket
Loosen screws from the canopy without removing them. Take out the bracket from the canopy and follow one of the options below:

1. For installation with an outlet box: Fix the bracket onto the outlet box using screws provided with the outlet box. Secure the crossbar of the bracket to the ceiling with 4 wood screws.
2. If installing without an outlet box: Secure the crossbar to a solid wood structure using 4 wood screws.

Step 2: Connect the Wires

1. Hang the fixture onto the bracket using the S hook provided.
2. Connect wires from the fixture to those from the outlet box using wire nuts: ground wire (green, green/yellow, or bare copper) to ground wire, neutral wire (white or blue) to neutral wire, hot wire (black or brown) to hot wire. Wrap connections with electrical tape.
3. Remove the S hook once connections are secure.

Step 3: Fix the Canopy

1. Screw the bracket screws onto the bracket without fully tightening them.
2. Align the L slots on the canopy with the screws on the bracket and rotate the canopy to lock it onto the bracket.
3. Tighten all screws securely to ensure the canopy is fixed in place.

Frequently Asked Questions (FAQ)
Q: Can I install this ceiling fan on an angled ceiling?
A: No, angled ceilings are not supported for installation with this ceiling fan.

Contact Information

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.

Email: lightingcustomercare@gmail.com

Packing List

Installation kit

Note :
Some extra hardware may be included. The quantity listed above is the number required for installation.

Safety Rules

1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
2.  A qualified licensed electrician is required for the installation.
3. The outlet box and support structure must be securely mounted and capable of reli-ably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
5. Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
6. Do not place any objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items, be cautious when work-ing around or cleaning the fan.
8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
9. After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
10. Electrical diagrams are reference only, different fan light may have different light shade and bulbs.
11. Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and can radiate radio frequency en-ergy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Warning:
To reduce the risk of personal injury, use only the two steel screws and washers provided with the outlet box for mounting to the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and need to be replaced, consult a qualified electrician if in doubt.

To reduce the risk of fire, electric shock or person injury, mount fan to outlet box marked “acceptable for fan support”.
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.

Installation Preparation

Tools You Need

If mounting to a support structure, you will also need the optional tools.

What to Expect with Your Installation

Installation Step 1 (Mount the Bracket)

Loosen screws from the canopy (don’t take off), take out the bracket from the canopy.
With Outlet Box: Fix the bracket onto the outlet box with screws from the outlet box, fix the cross bar of the bracket onto to the ceiling with 4 wood screws. Without Outlet Box: Fix the cross bar onto the solid wood structure with 4 wood screws.

Installation Step 2 (Connect the Wires)

1. Hang the fixture onto the bracket with “S” hook provided.
2. Connect wires from the fixture to the wires from outlet box with wire nuts, ground wire (green, green/yellow or bare copper) to ground wire, neutral wire (white or blue) to the neutral wire, hot wire (black or brown) to the hot wire. Wrap the connection with electrical tape.
3. Take away the “S” hook.

Installation Step 3 (Fix the Canopy)

1. Fix the bracket screws onto the bracket but not tighten them.
2. Align the “L” slots from the canopy to the screws on the bracket, rotate the canopy to lock it onto the bracket.
3. Tighten the screws.

Installation Step 4 (Install the Remote Holder)

1. Insert 2 batteries before using:
   AAA 1.5V battery x 2pcs (not included)

2. Install the remote holder onto the wall with screws.

Remote Control Instructions

NOTE :
Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included)

• Turn off power.

• Turn on / off the oscillating mode.
  ③④⑥⑦⑭⑮: Turn on the fan on 1/2/3/4/5/6 speed.

• Turn off the fan.

• Fan moves forwards or reversely.

• Adjust the brightness of the light.

• Adjust the light color temperature.

• Turn on / off the light.

• Quick switch of the light color: warm white→cool white→daylight white.

• 1H / 2H for timing the fan.
  REMOTE SIGNAL PAIRING: If the remote control looses signal of the fan, press and hold the button ⑨ at the very beginning after it’s turned on from wall switch. After the fan light flashes or beeps, it’s done.

APP Control Instructions

NOTE: Scan the QR code and install the APP in your phone, or search and install “FanLamp Pro” from Google Play, Apple App and other APP stores.
Make sure your phone is connected to the Internet and bluetooth enabled.
Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it.

NOTE: Scan the QR code and install the APP in your phone, or search and install “FanLamp Pro” from Google Play, Apple App and other APP stores.
Make sure your phone is connected to the Internet and bluetooth enabled.
Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it.

Trouble Shooting

1. Fan doesn’t work
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check the remote control battery (not included in this package).
   • Check the circuit breaker to ensure the power is on.
   • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
2. Lights Do Not Light Up / Flicker / Noisy Operation
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check your power and switch to make sure it’s power on.
3. Noisy Operation
   • Re-tighten all screws on bracket.
   • Check to see if any of the blades are cracked. If so, replace the blades.
4. Remote does not work
   • Make sure the battery is installed correctly.
   • Pair the remote control again (See page 9).
   • Install 2 new batteries.

Clean And Care

To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed.
Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>