AEG ORK6D391EB Fridge Freezer Refrigerator User Manual

AEG ORK6D391EB Fridge Freezer Refrigerator

Product Specifications

• Model Variants: ORK6D391EB, ORK6D391EU, ORK6D391EW, ORK6D391EX
• Gas Type: Isobutane (R600a)
• Dimensions (mm): 1900 (H) x 600 (W) x 718 (D)
• Capacity: [Specify the capacity if available]
• Energy Efficiency Rating: [Specify the energy efficiency rating if available]

Product Usage Instructions

Safety Instructions

Installation
Only a qualified person must install this appliance.

Electrical Connection
Risk of fire and electric shock. When positioning the appliance, ensure the supply cord is not trapped or damaged. Do not use multi-plug adapters and extension cables.

Use
Risk of injury, burns, electric shock, or fire. Be careful not to cause damage to the refrigerant circuit containing isobutane.

Internal Lighting
Risk of electric shock. Internal lights are designed for operational status indication only, not for room illumination.

Care and Cleaning
Risk of injury or damage to the appliance. Follow recommended cleaning procedures provided in the user manual.

Service
Refer to authorized service centers for maintenance and repairs.

Disposal
Dispose of the appliance responsibly to avoid risk of injury or suffocation.

Installation

Dimensions
Ensure correct dimensions and spacing during installation to maintain optimal functionality.

Location
Install in a dry, well-ventilated indoor position away from heat sources and direct sunlight. Allow proper air circulation around the appliance.
If placing the appliance against a wall, use back spacers provided or maintain the minimum distance specified in the installation instructions.

Frequently Asked Questions (FAQ)

• Q: Can children operate this appliance?
  A: Children should not operate the appliance unless properly instructed and supervised by adults.

• Q: What should I do in case of a power outage?
  A: Keep the refrigerator closed to maintain the cold temperature. If the outage persists, consider transferring perishable items to a cooler with ice packs.

Welcome to AEG! Thank you for choosing our appliance.
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 to 8 years and persons with very extensive and complex disabilities are allowed to load and unload the appliance provided that they have been properly instructed. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.

• Children should be supervised to ensure that they do not play with the appliance.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Keep all packaging away from children and dispose of it appropriately.

General Safety

• This appliance is for storing food and baverages only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
• To avoid contamination of food respect the following instructions:
  • do not open the door for long periods;
  • clean regularly surfaces that can come in contact with food and accessible drainage systems;
  • store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
• When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

WARNING!
Only a qualified person must install this appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.

Electrical connection

WARNING!
Risk of fire and electric shock.

WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING!
Do not use multi-plug adapters and extension cables.

• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Use

WARNING!
Risk of injury, burns, electric shock or fire.

The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.

• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the plastic parts of the appliance.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the condenser. They are hot.
• Do not allow food to come in contact with the inner walls of the appliance compartments.

Internal lighting

WARNING!
Risk of electric shock.

•  This product contains one or more light sources of energy efficiency class F.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Care and cleaning

WARNING!
Risk of injury or damage to the appliance.

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
• Door gaskets will be available for 10 years after the model has been discontinued.

Disposal

WARNING!
Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.

INSTALLATION

WARNING!
Refer to Safety chapters.

Dimensions

Space required in use ²|
---|---
H2| mm| 1900|
W2| mm| 600|
D2| mm| 718|

² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air

Overall space required in use ³

H2| mm| 1900
W3| mm| 649
D3| mm| 1224

³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment

Location
This appliance is not intended to be used as a built-in appliance.
In case of different installation from freestanding respecting space required in use dimensions, the appliance will function correctly but energy consumption might increase slightly.
To ensure appliance’s best functionality, you should not install the appliance in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet shall be maintained. Ideally, however, the appliance should not be positioned below overhanging wall units. One or more adjustable feet at the base of the cabinet ensure that the appliance stands level.

CAUTION!
If you position the appliance against the wall, use back spacers provided or keep the minimum distance indicated in the installation instructions.

CAUTION!
If you install the appliance next to a wall, refer to the installation instructions to understand the minimum distance between the wall and the side of the appliance where door hinges are to provide enough space to open the door when the internal equipment is removed (e.g. when cleaning).

This appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.
The correct operation of the appliance can only be guaranteed within the specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.

Electrical connection

• Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
• The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if the above safety precautions are not observed.

Levelling
When placing the appliance make sure that it stands level. This can be achieved by two adjustable feet at the bottom in front.

Rear spacers
In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.
If you position the appliance against a wall in a freestanding installation, install the rear spacers in order to guarantee the minimum distance required for air circulation.

Door reversibility
Please refer to the separate document with instructions on installation and door reversal.

CAUTION!
At every stage of reversing the door protect the floor from scratching with a durable material.

Easy opening
The cooling air contracts inside the appliance causing suction, making it difficult to open the door. To make opening the appliance easier, use an adhesive overlay from the bag with documentation.
To install the overlay:

1. Peel off the liner from the back of the overlay.
2. Stick the overlay on the frame at the bottom of the appliance, at a distance of min. 60 mm to 100 mm from the hinge.

Keep the overlay away from children. Hazard of swallowing.

OPERATION

Control panel

Switching on and off
To switch on the appliance, insert the plug into the wall socket.

When the appliance is switched on for the first time, the interior light may turn on after a one-minute delay due to opening tests.

To switch off the appliance, unplug it.

Temperature regulation
Recommended set temperature is:
+4°C for the fridge.

The temperature range may vary between 2°C and 8°C.
To set the temperature of the appliance, press the temperature regulation button repeatedly until you reach the desired temperature of the compartment.
Choose the setting keeping in mind that the temperature inside the appliance depends on:

• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.

A medium setting is generally the most suitable one.
The temperature indicators show the set temperature.
The set temperature will be reached within 24 hours.

Super Cool function
If you need to insert a large amount of food at ambient temperature into the fridge compartment, for example after doing the grocery shopping, we suggest activating the Super Cool function to cool the products more rapidly and to avoid warming another food which is already in the compartment.
This function stops automatically after a maximum of 5 hours or when the sensor reaches the lowest temperature for the fridge compartment (1-3°C).
You can deactivate the Super Cool function before its automatic end by repeating the procedure until the Super Cool indicator turns off or by selecting a different temperature of the fridge compartment.

Alarm
In case of cooling issues, power interruptions or significant temperature changes inside your appliance, the alarm indicator lights up red and the sound is on.

The alarm may light when you plug the appliance for the first time.

Refer to the “Troubleshooting” chapter for more possible causes of triggering the alarm, and solutions on how to deactivate it.

Standby mode
Activate the Standby mode to switch off the cooling function and therefore lower the energy consumption of the appliance.
To activate the Standby mode:

1. Set the temperature for 2°C. Refer to the “Temperature regulation” section.
2. Press and hold the temperature regulation button until all temperature indicators blink 3 times.

If you press the temperature regulation button while the Standby mode is on, all temperature indicators blink 3 times.
You can deactivate the Standby mode by repeating the above procedure.
During the Standby mode, the temperature inside the appliance may rise above the set 2°C. If that happens after the mode deactivates, the alarm indicator lights and the sound is on. When the appliance automatically lowers the temperature, the alarm indicator and the sound alarm deactivate.

DAILY USE

CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.

Removing and installing the door shelf
To remove the door shelf:

1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it comes free from the fastener.
3. Lift the left side of the shelf and remove it.

To put the shelf back in:

1. Place the shelf flat on the door.
2. Push two sides of the shelf downwards at the same time so that the shelf fits both fasteners.

Movable shelves
The walls of the refrigerator compartment are equipped with a series of runners so that the shelves can be positioned as desired.

To ensure correct air circulation, do not move the glass shelf above the vegetable drawer.

Vegetable drawer
There is a special drawer in the bottom part of the appliance suitable for storage of fruits and vegetables.

Humidity control
The glass shelf incorporates a device with slits (adjustable by means of a sliding lever), which makes it possible to regulate the humidity in the vegetable drawer(s).

Do not place any food products on the humidity control device.

The position of the humidity control depends on the type and on the amount of fruits and vegetables:

• Slots closed: recommended when there is a small amount of fruits and vegetables. In this way, the natural moisture content in fruits and vegetables is preserved longer.
• Slots opened: recommended when there is a big amount of fruits and vegetables. In this way, more air circulation results in a lower air moisture.

Temperature indicator
For proper storage of food the refrigerator is equipped with the temperature indicator. The symbol on the side wall of the appliance indicates the coldest area in the refrigerator.
If OK is displayed (A), put fresh food into area indicated by symbol, if not (B), wait at least 12 hours and check if it is OK (A).
If it is still not OK (B), adjust the setting control to a colder setting .

Fan
The refrigerator compartment is equipped with a device that allows rapid cooling of food and keeps a more uniform temperature in the compartment.
This device activates automatically when needed.

Do not block the air inlet and outlet openings when storing food, otherwise air circulation provided by the fan will be impaired.

HINTS AND TIPS

Hints for energy saving

• Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
• Do not open the door frequently or leave it open longer than necessary.
• Do not set too high temperature to save energy unless it is required by the characteristics of the food.
• Ensure a good ventilation. Do not cover the ventilation grilles or holes.
• Make sure that food products inside the appliance allow air circulation through dedicated holes in the rear interior of the appliance.

Hints for fresh food refrigeration

• Good temperature setting that ensures preservation of fresh food is a temperature less than or equal to +4°C.
• Higher temperature setting inside the appliance may lead to shorter shelf life of food.
• Cover the food with packaging to preserve its freshness and aroma.
• Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
• To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
• It is recommended to defrost the food inside the fridge.
• Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
• To prevent food waste the new stock of food should always be placed behind the old one.

Hints for food refrigeration

• Fresh food compartment is the one marked (on the rating plate) with
• Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
• It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
• Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
• Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
• Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
• Always refer to the expiry date of the products to know how long to keep them.

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

Cleaning the interior
Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.

CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.

CAUTION!
The accessories and parts of the appliance are not suitable for washing in a dishwasher.

Periodic cleaning
The equipment has to be cleaned regularly:

1. Clean the inside and accessories with lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
3. Clean the condenser with a brush at least twice a year.
4. Clean the evaporator tray periodically to remove accumulated water.
5. Rinse and dry thoroughly.

Defrosting of the appliance
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, next to the motor compressor, where it evaporates.

Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:

1. Disconnect the appliance from electricity supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door open to prevent unpleasant smells.

TROUBLESHOOTING

  WARNING!|
---|---
Refer to Safety chapters.|
8.1 What to do if…|
Problem| Possible cause| Solution
The appliance does not operate.| The appliance is switched off.| Switch on the appliance.
| The mains plug is not connected to the mains socket correctly.| Connect the mains plug to the mains socket correctly.
Problem| Possible cause| Solution
---|---|---
| There is no voltage in the mains socket.| Connect a different electrical appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not supported properly.| Check if the appliance stands sta‐ ble.
The compressor operates continually.| Temperature is set incorrectly.| Refer to the “Operation” chapter.
| Many food products were put in at the same time.| Wait a few hours and then check the temperature again.
| The room temperature is too high.| Refer to the “Installation” chapter.
| Food products placed in the appli‐ ance were too warm.| Allow food products to cool to room temperature before storing.
| The door is not closed correctly.| Refer to the “Closing the door” sec‐ tion.
Door is misaligned or interferes with ventilation grill.| The appliance is not levelled.| Refer to the installation instructions.
Door does not open easily.| You attempted to re-open the door immediately after closing.| Wait a few seconds between closing and re-opening of the door.
The lamp does not work.| The lamp is in stand-by mode.| Close and open the door.
| The lamp is defective.| Contact the nearest Authorized Service Centre.
There is too much frost and ice.| The door is not closed correctly.| Refer to the “Closing the door” section.
| The gasket is deformed or dirty.| Refer to the “Closing the door” section.
| Food products are not wrapped properly.| Wrap the food products better.
| Temperature is set incorrectly.| Refer to the “Operation” chapter.
| Appliance is fully loaded and is set to the lowest temperature.| Set a higher temperature. Refer to the “Operation” chapter.
| Temperature set in the appliance is too low and the ambient temperature is too high.| Set a higher temperature. Refer to the “Operation” chapter.
Water flows on the rear plate of the| During the automatic defrosting| This is correct. Dry the water with a
refrigerator.| process, frost melts on the rear plate.| soft cloth.
There is too much condensed water on the rear wall of the refrigerator.| Door was open too frequently.| Open the door only when necessary.
| Door was not closed completely.| Make sure the door is closed completely.
| Stored food was not wrapped.| Wrap food in suitable packaging be‐ fore storing it in the appliance.

If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

Replacing the lamp
The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to the “Installation” chapter.
3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.

NOISES

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.

INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

aeg.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>