SIEMENS FSPD036 Boltshield FSPD Surge Protective Device User Guide

June 10, 2024
SIEMENS

SIEMENS LogoSIEMENS FSPD036 Boltshield FSPD Surge Protective
Device FSPD SERIES FOR EXTERNAL APPLICATIONS
BoltShield ™ Surge
Protection Devices

FSPD036 Boltshield FSPD Surge Protective Device

Material ID Surge Current  Rating
FSPD036 36kA

General Specifications

UL Type Designation Type 1
UL 1449 I-nominal Rating 10kA
UL 1449 Short Circuit Current Rating 200kA

Design Specifications
Custom MOV design for high energy handling in Cateogry C locations
Thermally protected MOVs
External parallel connected for mounting next to electrical gear
Reduced mode of protection (L1-N, L2-N)
Diagnostic and Status Monitoring Specifications
LED Protection Status Monitoring (Single LED Standard)
Enclosure
Polycarbonate 4.25” x 2.41” x 2.75”
Lid ultrasonically sealed
NEMA 4X
1/2 inch NPT Side Mount Nipple
Filtering
NO

Physical Specifications

Humidity Range 0-95% non-condensing
Operating Frequency 50-60Hz
Operating Temperature -35ºC to +85ºC
Typical Connection 18” #12 AWG (pre-wired pig tails)
Material ID Surge Current   Rating
--- ---
FSPD060 60kA
FSPD100 100kA
FSPD140 140kA

General Specifications

UL Type Designation Type 2
UL 1449 I-nominal Rating 20kA
UL 1449 Short Circuit Current Rating 200kA

Design Specifications
Custom MOV design for high energy handling in Cateogry C locations
Thermally protected MOVs
External parallel connected for mounting next to electrical gear
All modes of protection (L-N, L-G, N-G)
Diagnostic and Status Monitoring Specifications
Phase Loss Monitoring (Standard)
Audible Alarm (Standard)
Form C Dry Contact, 240V, 2A (Standard)
3 GREEN LEDs – one for each Line disconnector
1 RED LED – flashes if fault condition:
GRM (Ground Reference Monitoring), N-G voltage > 20V detected.
Enclosure
Polycarbonate 7.95” x 3.06” x 2.75”
Lid screwed and gasketed
NEMA 4X
3/4 inch NPT Side Mount Nipple
Filtering
Standard (UL 1283)

Physical Specifications

Humidity Range 0-95% non-condensing
Operating Frequency 50-60Hz
Operating Temperature -40ºC to +85ºC
Typical Connection 18” #12 AWG (pre-wired pig tails)

Standards Compliance and Certifications
UL 1449 5th Edition: 2021, cULus, ANSI/IEEE C62.41.1-2002, C62.41.2-2002, C62.45-2002, NEC Article 285
ISO 9001:2014 Quality Management System, ISO 17025:2007 Laboratory Certification (UL DAP Program) Compliance with RoHS,
REACH & California Prop 65.
100% Quality Tested prior to shipping

FSPD036| Voltage Code| System Voltage| L-N| L-G| L-L| N-G| MCOV
---|---|---|---|---|---|---|---
| A| 120/240V, 1Ø, 3W| 700| –| 1200| –| 150
FSPD060,
FSPD100, FSPD140| Voltage Code| System Voltage| L-N| L-G| L-L| L-L| MCOV
| A| 120/240V, 1Ø, 3W| 700| 700| 1200| 1200| 150

FSPD036 Wiring Configurations

FSPD036 Product Diagram [in millimeters] and inches2.75

SIEMENS FSPD036 Boltshield FSPD Surge Protective Device - Product
Diagram

Size and Mechanical Specifications

Dimensions 4.25” x 2.41” x 2.75”
Weight  0.46 lbs.
Enclosure Type Polycarbonate NEMA 4X
Installation Type Indoor/Outdoor
Mounting Method Flush/Flange/Through-hole

SIEMENS FSPD036 Boltshield FSPD Surge Protective Device - Product Diagram
1

FSPD060, FSPD100, FSPD140 Wiring Configurations

SIEMENS FSPD036 Boltshield FSPD Surge Protective Device -
FSPD060

FSPD060, FSPD100, FSPD140 Product Diagram [in millimeters] and inches

SIEMENS FSPD036 Boltshield FSPD Surge Protective Device -
FSPD060

Size and Mechanical Specifications

Dimensions 7.95” x 3.06” x 2.75”
Weight 1.38 lbs.
Enclosure Type Polycarbonate NEMA 4X
Installation Type Indoor/Outdoor
Mounting Method Flush/Flange/Through-hole

SIEMENS FSPD036 Boltshield FSPD Surge Protective Device - Product Diagram
3

Legal Manufacturer
Siemens Industry, Inc.
3617 Parkway Ln
Peachtree Corners, GA 30092
United States of America
Telephone: +1 800-333-7421
www.usa.siemens.com/surge
Order No. RPFL-FSPD-0223
© 08.2022, Siemens Industry, Inc.
This document contains a general description of available technical options only, and its effectiveness will be subject to specific variables including field conditions and project parameters. Siemens does not make representations, warranties, or assurances as to the accuracy or completeness of the content contained herein. Siemens reserves the right to modify the technology and product specifications in its sole discretion without advance notice.

SIEMENS Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SIEMENS User Manuals

Related Manuals