CAT LINK 5522-15878 Catlink Baymax Scooper SE User Manual

CAT LINK 5522-15878 Catlink Baymax Scooper SE

Specifications

• Model: SCOOPER SE
• Features: Wi-Fi connectivity
• Compliance: CE mark for EU countries
• Manufacturer: Reedog, sro
• Address: Sedmidomky 459/8, 101 00 Prague 10
• Contact: Phone +1 646 980 4569,
• Email: info@electric-collars.eu

Thank you for purchasing the CATLINK Automatic Cat Litter Box – SCOOPER SE!

• As a company, CATLINK is committed to developing innovative products that cater to your pet’s needs and make your life easier. This user manual has been designed to help you get the most out of your SCOOPER SE, with detailed instructions for setting it up and helpful tips and advice for optimal usage.
• The SCOOPER SE offers a variety of features that make it an indispensable addition to your home. To ensure you can fully explore and utilize these features, we recommend keeping this manual within easy reach for future reference. In case you require further assistance or have any queries, please feel free to email us at support@catlink.cn or call us at +1 833 440 2772.
• We hope you and your pets enjoy the freedom that comes with the CATLINK Automatic Cat Litter BOX- SCOOPER SE!

Thank you again for choosing CATLINK

Important Safety Instructions

1. Always be sure any cat in your household that might use the SCOOPER SE weighs at least 3.3 lbs. Cats must weigh 3.3 to 22 lbs to safely use the SCOOPER SE.
2. Always place the SCOOPER SE on a firm, level surface. Avoid soft, uneven, or unstable flooring, which may affect the ability of the Unit to detect your cat.
3. Always unplug the Unit before servicing.
4. Never force your cat into the SCOOPER SE.
5. Never put anything in the Unit other than clumping litter or litter beads that are small enough to pass through the screen.
6. Never sit on or place anything on top of the SCOOPER SE.
7. Never push the SCOOPER SE against a wall or into a corner (must not be touching any walls).
8. Never remove the Globe or Cover while the Unit is rotating or turn the Unit on if the Globe or Cover is removed.
9. Never wet or submerge the Cover or Base.
10. Never allow children and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge to use, clean, or maintain the SCOOPER SE without supervision, instruction concerning its use in a safe way, and understanding of the hazards involved. Children under 8 years of age should not be allowed contact with the SCOOPER SE.
11. Never allow children or others to play with the SCOOPER SE.
12. Never use an external power supply other than the one provided with the Unit. Only use the power supply provided with the Unit. If it is damaged, contact us for a replacement.

Packing List

Product Structure

Setting Up Your SCOOPER SE

Once you have assembled the item and confirmed that the package is complete, get started by following the steps below.

• Check the items : Confirm that the item and accessories are present.
• Check the installation : Ensure that all items are installed correctly to avoid any issues.
  • Make sure that the Trigger under the Right Cover is firmly locked in place.
  • Confirm that both Covers are properly installed and free from warping.
  • Make sure that the Knob is set to the Clean position and that the Screen is not covered by the Empty Pad used for emptying litter.
• Placement : Avoid direct sunlight and avoid placing the product directly facing a wall to prevent potential false triggering of infrared sensors.
  • Make sure that the Unit is placed on a level and sturdy surface with no objects beneath it. Soft, uneven, or unstable flooring should be avoided.
  • Locate the Unit near a power outlet, with no walls or corners touching it, and nothing on top of it.
  • Place the Unit close to a stable WiFi signal and far from devices that may cause WiFi interference.
• Check the Trash Liner: Check that the Trash Liner is properly fitted and the cover of the Waste Bin is closed.
• Power-on: If the Globe is incorrectly positioned after powering on, the device will automatical­ ly reset it through a self-check.
• Wi-Fi connection

NOTE:

• Place the Unit as close to the router as possible, and make sure the Unit is powered on.

• Authorize location information, and turn on GPS on your Android phone.

• Use only letters and numbers in the Wi-Fi name to avoid connection issues.

• UUsinga a 2.4GHz Wi-Fi network to connect the product 5to GHz Wi-Fi is not supported, and certain locations such as hotels and airports that require special certification of Wi-Fi may also not be supported.

  1. G) Download the CATLINK app in the application market of your phone or scan the QR code.

  2. Connect your phone to 2.4GHz Wi-Fi.

  3. Register your account in the app and log in. (Make sure to authorize location information and turn on GPS for your Android phone). On the DEVICE page, click the ‘+’ in the upper right corner, select the SCOOPER SE, and follow the instructions to complete the Wi-Fi connection. If the Unit can’t be searched, click SCOOPER SE to add it manually at the bottom of the page, and follow the prompts.

  4. If you need to add the device manually, press and hold the Clean Button [ ] for 10 seconds.
     You will hear two initial beeps, followed by two more beeps. Release the button once the Indica­ tor flashes.

  5. Connect SCOOPER SE to Wi-Fi according to the prompts in the CATLINK app

  6. After the Wi-Fi connection is successful, the Indicator of the Unit will turn on.

  7. After completing the above steps, you can use the functions in the CATLINK app. Connection Failed
     If you experience connection failure, turn off the power and repeat the steps outlined above. Be sure to read the NOTE under the [WiFi Connection] section of this chapter to ensure that you follow the process correctly and avoid any errors.
     If you fail to connect the device, please feel free to contact us.

• Cat litter

  1. Press the Add/Empty Button [ e) l to turn the Globe upwards.
  2. After the product stops rotating, add cat litter up to the MAX line B
  3. After adding litter, press the Add/Empty Button again to level the litter and reset the Globe.
  4. After spreading it out, if the litter line is near the upper edge of the MAX line A, it means the amount of litter is appropriate. NOTE: Press the Add/Empty Button once before adding litter each time After adding litter, press the Add/Empty Button again to level it If you forget to press the Add/Empty Button before adding litter, be sure to run a cleaning cycle after adding litter.

• Activate and place the Deodorization Hydrogel

NOTE : The Deodorization Hydrogel should .. be replaced every 60 days.
Congratulations!
Your SCOOPER SE is now ready to use.

Clean Modes

(*Please switch cleaning mode on CATLINK APP.)

Button Functions

Indicator

How to Empty

Empty means removing all the litter from the Globe.

1. To prevent the Waste Bin from overflowing during the emptying process, replace the Trash Liner with a new one.
   • Do not attempt to empty the Waste Bin when it is full.
2. (V Rotate the Knob to the Empty position, and the Empty Pad will cover the Screen.
   • Do not rotate the Knob while the Unit is in motion.
3. To start the emptying process, either long press the Add/Empty Button for 3 seconds or select Empty in the app.
   • Empty cannot be performed when the Knob is not in the Empty position.
4. Once emptying is complete, rotate the Knob to the Clean position and the Empty Pad will return to its home position.
   • Cleaning cannot be performed when the Knob is not in the Clean position.
5. After the Knob returns to the Clean position, open the Waste Bin cover and replace the Trash Liner.

Move the Unit

1. Avoid dragging the Unit directly on the floor. Instead, it is recommended to lift the Unit with your hands.
2. Alternatively, gently lift and slide the SCOOPER SE using the method shown in the figure.

How to Clean

• Do not wash the Base and avoid spraying any liquids on it. Instead, use a damp cloth to wipe it clean.
• The Globe and Side Covers can be washed directly with water. Once done, make sure to dry them thoroughly before reinstalling.

It is recommended to remove and clean the liner at the bottom of the globe and let it dry before reassembling.

Safety Protection System

Instructions of the Globe Liner

Disassembly

• Apply upward force to lift the pad clasps on both sides of the ball bin opening. After lifting, simply take it off.

Installation

1. Place a new Globe Liner into the Globe, aligning the edges of the liner with the clasps.
2. Once aligned, press down gently to ensure the Globe Liner adheres to the Globe and has no gaps.

Troubleshooting

Product Specifications

• Product Name CATLINK Automatic Cat Litter Box – SCOOPER SE
• Product Model CL-CA-01
• Main Material pp
• Product Size 23.58 x 20.98 x 21.45 inches
• Rated Input 12V / 2A
• Applicable Scope Cat (3.3-22 lbs)
• Weight 24.25 lbs
• Brand CATLINK
• Website www.catlinkus.com

Customer Service

We will provide customers with a one-year free warranty service. If you have questions or need assistance, contact us!

Phone Support

• Phone: + 1 833 440 2772
• Mon-Fri: 1 0AM-6PM EST
• Email Support:support@catlink.cn 24/7
• Toll free: + 1 833 440 2772
• Email: support@catlink.cn

Frequently Asked Questions

• Q: Where can I find the necessary documentation for the SCOOPER SE?
  • A: All documentation is available on the website www.electric-collars.com
• Q: What should I do in case of technical parameter changes or printing errors?
  • A: Any changes or errors should be reported to the manufacturer immediately for resolution.

References

• ★☆ Electronic training collars for dogs ☆★ - Electric-Collars.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>