HOMCOM 503-020V70 Rotate Height Salon Massage Spa Chair Instruction Manual
- June 1, 2024
- HOMCOM
Table of Contents
HOMCOM 503-020V70 Rotate Height Salon Massage Spa Chair
Specifications:
- Model: IN230300054V01_GL
- Language: English (EN)
- Country: United States, Canada (US_CA)
- Components: A-5, B-1, C-1, D-1, E-1, F-4, G-1, H-4, I-4
Product Usage Instructions
Unpacking and Setup:
When you receive the product, carefully unpack all components and ensure
nothing is missing. Follow the provided manual for setup instructions.
Powering On:
Connect the product to a power source as per the manual’s guidelines. Press
the power button to turn on the device.
Initial Configuration:
Follow the on-screen prompts or manual instructions to configure the
product settings such as language, date, and time.
Basic Operations:
Learn how to navigate through the product’s menu system and access basic
functions like volume control, brightness settings, etc.
Maintenance and Care:
Regularly clean the product using a soft, dry cloth. Avoid using harsh
chemicals or abrasive materials that may damage the surface.
Frequently Asked Questions (FAQ):
-
Q: How do I reset the product to factory settings?
A: To reset the product, locate the reset button or follow the specific instructions in the manual regarding resetting to factory defaults. -
Q: What should I do if the product displays an error message?
A: If you encounter an error message, refer to the troubleshooting section in the manual to identify the issue and follow the recommended steps for resolution.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only for domestic use
Instructions for use
- Put the chair stably on a flat floor.
- Stay away from open flames.
- Avoid the overload at the chair.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Check the seating regularly.
Storage conditions
The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
- Beware of crushing and cutting hazards during assembly.
- The manufacturer declines all responsibility in case of damages due to a bad installation or withering.
- If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
PARTS
HARDWARE PARTS
INSTALLATION
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
[email protected]
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA