HOMCOM IN221100546V02 Drawer Instruction Manual
- June 1, 2024
- HOMCOM
Table of Contents
HOMCOM IN221100546V02 Drawer
Safety
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IF HAVE THIS ACCESSORY
QUICKFIT : Tighten quickfit until shoulder is flush with panel.Do not overtighten or undertighten.
CAM LOCK : When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are joined.
Turn cam lock clockwise to tighten.
Box Content
IF HAVE THIS ACCESSORY
lt may be necessary to adjust the hinges so that the doors align.Use the instructions below as a guide.
To adjust the door vertically loosen the screw as shown and move up and down as needed.
To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
Please fix other screws.
lf it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws, please do not overtighten the screws.
PARTS
HARDWARE
Assembly Instruction
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>