HOMCOM 837-151 Modern Storage Cabinet Freestanding Cupboard Instruction Manual
- June 1, 2024
- HOMCOM
Table of Contents
HOMCOM 837-151 Modern Storage Cabinet Freestanding Cupboard
Safety
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
PACKING DETALS: TOTAL 2 BOXES
| NO. | PARTS | QTY |
|---|---|---|
| 1 |  | 1 | |
| 2 |  | 1 | |
| 9 |  | 2 | |
| 10 |  | 1 | |
| 15 | 3 | |
| 16 | 3 |
17| | 3
12| | 2
20| | 2
20| | 1
13| 
| 2
14| 
| 2
19| 
| 3
3| 
| 1
4| | 1
5| | 1
6| | 1
7| 
| 1
8| 
| 1
11| 
| 2
18| 
| 3
USING CAM LOCK AND QUICKFIT
QUICKFIT: Tighten quickfit until shoulder is flush with panel.Do not
overtighten or undertighten.
CAM LOCK :When fitting cam lock, ensure starting position is correct before
you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are
joined.
Turn cam lock clockwise to tighten.
PRE-FIX DRAWER RUNNER INSTRUCTIONS
NOTE: Pull inner and outer drawer runners apart before fixing them to panels.
Slide drawer runners apart until the drawer lock can be seen, as shown.
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
Your inner and outer drawer runners are ready to be fixed to panels.
HINGE ADJUSTMENT GUIDE
lt may be necessary to adjust the hinges so that the doors align.Use the instructions below as a guide.
-
To adjust the door vertically loosen the screw asshown and move up and down as needed.
-
To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
-
To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
-
Please fix other screws
PARTS
Assembly Instruction
Please find the exact hole for installation, otherwise it will be
misaligned.The screws on the drawer slide must be leveled , otherwise it will
affect the smoothness of the drawer.
Please find the exact hole for installation, otherwise it will be
misaligned.The screws on the drawer slide must be leveled , otherwise it will
affect the smoothness of the drawer
The buckles have 3 optional adjustment
Be careful to push in the board when the both sides slide way been aligned.
This is anti-dumping belt that fix the product to the wall and it can be used
or not follow your needs.
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>