HOMCOM 838-146 Modern White High Gloss Matt Cabinet Instruction Manual
- June 1, 2024
- HOMCOM
Table of Contents
HOMCOM 838-146 Modern White High Gloss Matt Cabinet
Product Information
- Specifications:
- Model Number: IN220800692V02_GL
- Dimensions: 20 x 5 x 4 inches
- Components:
- 1 x Main Unit
- 2 x Component A
- 3 x Component B
- 4 x Component C
- 5 x Component D
- 6 x Component E
- 7 x Component F
- 8 x Component G
- 9 x Component H
- 10 x Component I
- 11 x Component J
- 12 x Component K
- 13 x Component L
Product Usage Instructions
- Step 1: Unpacking and Setup
- Remove all components from the packaging and verify that all parts are included as per the list in the manual.
- Step 2: Assembly
- Follow the assembly instructions provided in the manual to put together the different components.
- Step 3: Power On
- Connect the product to a power source compatible with the input requirements (110-240V, 50-60Hz).
- Step 4: Operation
- Refer to the user manual for detailed instructions on how to operate the product effectively.
FAQs
- Q: How do I start using the product?
- A: To start using the product, make sure to pull out the plastic sheet before use as indicated in the manual.
- Q: What should I do if a component is missing?
- A: If any component is missing, please contact customer support for assistance in obtaining the missing part.
- Q: Can I disassemble the product for cleaning?
- A: Yes, you can disassemble the product for cleaning purposes. Please refer to the user manual for instructions on how to safely disassemble and reassemble the product.
Tools Recommended
IMPORTANT. RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
PARTS
I HAVE THIS ACCESSORY
NOTE DIFFERENT MODELS
- QUICKFIT: Tighten quickfit until the shoulder is flush with the panel. Do not overtighten or under-tighten.
- CAM LOCK: When fitting the cam lock, ensure the starting position is correct before you insert the connecting quickfit.
- The quickfit head should be in the centre of the cam lock when the two panels are joined.
- Turn the cam lock clockwise to tighten.
- It may be necessary to adjust the hinges so that the doors align. Use the instructions below as a guide.
- To adjust the door vertically loosen the screw asshown and move up and down as needed.
- To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
- To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
- Please fix the other screws
- If it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws, please do not overtighten the screws.
PARTS
HARDWARE
INSTALLATION
CONTACT
If you have any questions, please get in touch with our customer care centre.
- Our contact details are below:
- 001-877-644-9366
- customerservice@aosom.com.
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
If you have any questions, please get in touch with our customer care centre.
- Our contact details are below:
- IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>