SAMSUNG HW-LS60D Music Frame Wireless Speaker User Guide
- June 1, 2024
- Samsung
Table of Contents
SAMSUNG HW-LS60D Music Frame Wireless Speaker
Product Information
Specifications
- Model : HW-LS60D
- User Guide : AH81-17454B-00
- Manufacturer: Samsung Electronics
- Country of Origin : Canada
Product Usage Instructions Safety Information
Before using the product, please review the safety information provided:
- Read and keep the operating instructions handy for future reference.
- Avoid using the product near water and do not block ventilation openings.
- Do not expose the unit to direct sunlight or extreme heat sources.
- During thunderstorms, disconnect the AC plug from the wall outlet to prevent damage from voltage peaks.
Checking the Components
When unpacking the product, ensure all components are included:
- Holder-Plate x 8
- Holder-Guide x 1
Product Overview
The front of the device features a Volume control and a Multi-Function button:
- Press the Multi-Function button to turn on the Wireless Speaker in standby mode.
- Use the Multi-Function button to change modes.
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO
USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Refer to the table below for an explanation of symbols which may be on your
Samsung product.
WARNING
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
- To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions
CAUTION
- Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
- To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
CAUTION (for Canada)
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
This device may automatically discontinue transmission if there is no
information to transmit, or an operational failure. Note that this is not
intended to prohibit the transmission of control or signaling information or
the use of repetitive codes where required by the technology.
This Class B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20 cm
between the radiator & your body
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
- Read these instructions.
- Keep these Instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug.
- A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
PRECAUTIONS
-
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. -
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
-
Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
-
Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures.
If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
CHECKING THE COMPONENTS
- Wireless Speaker main unit / Wallmount Component
- Stand/ Wallmount Guide
- AC/DC Adapter/b / Bracket-Wall Rear
- Power Cord / x 1
- Photo Frame/ x 2
- Holder-Plate x 8 / Anchor x 2
- Holder-Guide x 1 / Holder-Screw x 1
- Screw (M5 X L55)/ Spacer x 4
NOTE
- To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
PRODUCT OVERVIEW
Front
Rear
CONNECTING THE POWER
Connecting the power and units
- For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Wireless Speaker Main Unit)
CONNECTING THE SMARTTHINGS APP
Installation
- The SmartThings app allows you to control the functionality of and adjust the settings of the Wireless Speaker.
- Download the SmartThings app from the app store of your mobile device, or simply scan the provided QR code and download the app.
Device registration
- Run the SmartThings app on your mobile device.
- Follow the on screen instructions and add the Wireless Speaker to your mobile device.
If the automatic pop-up window does not appear, press (+ ) on the Home screen to register the Wireless Speaker.
Control with SmartThings
- With the SmartThings app open on your device, select the Wireless Speaker that you have added.
- The settings menu of the Wireless Speaker appears, where you can adjust the various settings including volume, sound mode or fine-tuning.
NOTE
The illustration below may differ with the app version.
CONNECTING VIA WIFI WITH TV
- Wi-Fi connection is available only on Samsung TV.
- The TV and Wireless Speaker must be connected to the same wireless network (Wi-Fi).
- The menus may differ depending on the year of manufacture, refer to your TV manual.
- Change the input source of the TV by using the Audio menu to Wireless Speaker.
Samsung TVs released in 2017 or later : ( ) → Sound → Sound Output → Music Frame (Wi-Fi)
USING THE Q-SYMPHONY FUNCTION
- This function is supported only when the Wi-Fi is connected.
- It is available with new Samsung TV models to be released 2024.
- To use this function, both the wireless speaker and the TV must be connected to the same Wi-Fi network.
When the Wireless Speaker connects to a Samsung TV that supports the
Q-Symphony function, you can play the sound simultaneously through the
Wireless Speaker and the TV.
If you use the Q-Symphony function, the surround sound played on the Wireless
speaker allows you to enjoy a richer, more three-dimensional surround sound
effect.
When the Wireless Speaker is connected, the “Q-Symphony” menu appears on the
TV. (The message displayed may differ with the TV model.)
(Settings ( ) → All Settings ( ) → Sound → Sound Output)
CONNECTING VIA BLUETOOTH WITH MOBILE
- Press (Multi-Function) button to go Bluetooth Mode.
- Press (Mic On/Off) button for 5 seconds for pairing.
- It is also available to pair by pressing [ ] on the SmartThings App screen of your mobile device.
NOTE
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
TROUBLESHOOTING
Before seeking assistance, check the following.
The Wireless Speaker does not turn on.
- Check whether the power cord of the Wireless Speaker is correctly inserted into the outlet. Wireless Speaker works erratically.
- After removing the power cord, insert it again.
- Try again after initializing the product.
- If there is no signal, the Wireless Speaker automatically turns off after a certain period of time.
Turn on the power.
- The red LED indicator light on the Wireless Speaker stays on.
- The microphone is turned off. Turn on the microphone.
Sound is not output from the Wireless Speaker.
- The volume of the Wireless Speaker is too low or muted. Adjust the volume.
- When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
- For sound output of the TV, select Wireless Speaker. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Select Wireless Speaker)
- Remove the cable from the Wireless Speaker and then reconnect it.
Wireless Speaker will not connect via Bluetooth.
- When connecting a new device, switch to “BT PAIRING” for connection. (Press the (Mic On/Off) button onthe body for at least 5 seconds.)
- Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Bluetooth Speaker List)
The sound drops out when connected via Bluetooth.
- Some devices can cause radio interference if they are located too close to the Wireless Speaker. e. g. microwaves, wireless routers, etc.
- If your device that is connected via Bluetooth moves too far away from the Wireless Speaker, it may cause the sound to drop out. Move the device closer to the Wireless Speaker.
- If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, the sound may drop out. Check the installation environment and conditions for use.
Wireless Speakers will not connect to Wi-Fi.
-
Make sure the wireless router is turned on and then reconnect the wireless router after rebooting.
-
The Wireless Speaker will not connect if the wireless signal is too weak. Try moving the router closer to the Wireless Speaker, or eliminating any obstacles that are between the Wireless Speaker and the router, if possible.
The Wireless Speaker does not turn on automatically with the TV. -
When you turn off the Wireless Speaker while watching TV, power synchronization with the TV is disabled. First, turn off the TV.
IMPORTANT NOTES ABOUT THE SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance.
SPECIFICATIONS AND GUIDE
- Model Name: HW-LS60D
Weight
- Without Stand: 9.3 lbs (4.2 kg)
- With Stand : 10.1 lbs (4.6 kg)
Dimensions (W x H x D) :
- Without Stand
- 13.9 x 13.9 x 2.1 inches (353.0 x 353.0 x 54.2 mm)
With Stand
- 13.9 x 14.4 x 5.7 inches (353.0 x 364.8 x 143.4 mm)
- AMPLIFIER Rated Output power : 120W
- Operating Temperature Range : + 50 °F to +104 °F (+10 °C to +40 °C)
- Operating Humidity Range : 10 % to 80 %, non-condensing
- Storage Temperature Range : -4 °F to +113 °F (-20 °C to +45 °C)
- Storage Humidity Range : 5 % to 95 %, non-condensing
Supported play formats
- Dolby 5.1ch / Dolby Digital Plus /
- Dolby ATMOS (Dolby Digital Plus) / LPCM 2ch
NOTE
• Samsung Electronics Co., Ltd reserves the right to change the specifications
without notice.
• Weight and dimensions are approximate.
To activate/deactivate Wi-Fi connection
Press and hold the (Mic On/Off) button and the – button on the side panel simultaneously for more than 30 seconds. This will turn on or off the Wi-Fi connection.
To activate/deactivate Bluetooth connection
Press and hold the (Mic On/Off) button and the + button on the side panel simultaneously for more than 30 seconds. This will turn on or off the Bluetooth connection.
Precaution: The Wireless speakers will restart automatically if you turn on/turn off Wi-Fi or Bluetooth.
[ENERGY STAR]
ENERGY STAR qualified model only
-
Your Samsung product is ENERGY STAR qualified in its factory default setting. Changes to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification.
-
Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program.
ENERGY STAR qualified model only (The other models) -
As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc
- 2050 Derry Rd West Mississauga, On. L5N 0B9
- Tel: 1-800-SAMSUNG (726-7864)
- Fax: (905) 542- 1199
- Website: www.samsung.com/ca
You can access the User guide on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.com/support)
© 2024 Samsung Electronics Co., Ltd. All rights reserved
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center.
HEADQUARTERS
- Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada
- TEL: 1-800-SAMSUNG (1-800-726-7864)
- www.samsung.com/ca/support
Web Site
www.samsung.com/ca/support(English)
www.samsung.com/us/support(French)
www.samsung.com/us/support
FAQS
Q: Where can I find the user guide online
A: You can access the user guide on Samsung's online customer support center by scanning the QR code provided or by downloading the document format from Samsung's website.
Q: What should I do in case of a safety warning symbol on the product
A: If you encounter any safety warnings or symbols on the product, refer to the user manual for further guidance or contact the Samsung Service Center forassistance.
Q: How should I clean the device
A: Use a dry cloth to clean the device. Avoid using liquid cleaners or exposing the unit to moisture.
Q: How do I contact Samsung Customer Care
A: You can contact Samsung Customer Care by calling 1-800-SAMSUNG or visiting Samsung's official website for support.
References
- Homepage | ENERGY STAR
- Samsung Canada | Mobile | TV | Home Appliances
- Samsung Canada | Mobile | TV | Home Appliances
- Samsung Canada | Mobilité | Téléviseurs | Électroménagers
- Aide et assistance : produits | Samsung Canada
- Support Home | Official Samsung Support US
- Support Home | Official Samsung Support US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>