petex Design 301 Child Car Seat Booster Cushion Instruction Manual

petex Design 301 Child Car Seat Booster Cushion

• Booster seat made of durable plastic (HDPE)
• Easy installation in your vehicle

Installation ONLY in the driving direction
Suitable for children with a body height from 125 to 150 cm
Test standard approved

Installation – Vehicle Application

1. Please read the instructions carefully to avoid injury due to incorrect installation and use. Otherwise, the manufacturer assumes no liability.
2. This child seat is suitable for proper use in all cars with 3-point safety belts that comply with the European standard (ECE-R 16) or equivalent standard.
3. This booster seat is suitable for children with a height of 125 – 150 cm (from approx. 6 – 12 years) and may only be used in forward-facing positions (DE).
4. The fixation of your child in the passenger seat with an active front airbag is prohibited by some vehicle manufacturers.
5. For more information, refer to the user manual of your vehicle. Our recommendation is to place your child in the rear seat.
6. Avoid the child seat exposed to direct sunlight because children could injure themselves on the heated seat.
7. Do not use the child seat without a cover.
8. Adjust the safety belts to the height of the child and make sure the belts are not twisted or tangled.
9. Components of the seat, that are damaged or worn out, must be replaced.
10. Check for loose items in the passenger compartment, they can injure the child during braking.
11. Make sure that all buckles are fully locked.
12. The child seat must be replaced after an accident.
13. The child seat must be secured using the seat belt of the car, even if no child is transported.
14. Use and maintain the child seat only as recommended by the manufacturer. If in doubt, contact the manufacturer of the child seat.
15. When not in use, store the children’s seats in an appropriate place. Do not store heavy objects on the seat.
16. Do not make any modifications to the child seat. That can affect the safety characteristics of the product negatively.
17. Keep corrosive substances away from the child seat.
18. The manufacturer guarantees the quality of the new product, but not for used items.

Vehicle Application

Correct fitting

Incorrect fitting

This child seat is suitable for proper use in all cars with 3-point safety belts that comply with the European standard (ECE-R 16) or equivalent standard.

Important
The child seat can only be installed on cars with lap- and shoulder belts.

• Do not use the booster seat on side or back-facing passenger seats.
• Not to be used on this seat, if the fixation of your child in the passenger seat with active front airbag is prohibited by the vehicle manufacturer.
• Can only be used if a lap- and shoulder belt is available.
• Put the booster seat onto the car seat. Ensure, that the booster seat is positioned firmly against the backrest of the car seat.
• Use the 3-point belt of the vehicle to buckle up the child.
• Make sure that the shoulder- and lap belts are properly positioned on the child`s body and the booster seat. (see pictures on the right)
• Make sure to use the intended buckles for the seat belts and not twist or mix with other seat belts.

References

• PETEX Onlineshop | Autozubehör direkt vom Hersteller

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>