Bella Depot DC2006-B Modern Ceiling Fan Installation Guide

Bella Depot DC2006-B Modern Ceiling Fan

SAFETY RULES

1. To reduce the risk of electric shock, turn off the electricity to the fan at the main fuse box or circuit panel before beginning.
2. All wiring must be in accordance with the local electrical codes or National Electrical Code. Electrical installation should be performed by a qualified licensed electrician.
3. To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges.
4. Make sure the installation site you choose allows clear space for the blades to rotate and at least seven 7 feet (2.13 meters) of clearance between the floor and the fan blade tips. The fan should be mounted so that the tips of the blades are at least thirty 18 inches (45. 72 centimeters) from walls or other upright structures.
5. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount fan only to an outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
6. The outlet box and ceiling support structure must be securely mounted and capable of supporting at least 45 KGs.
7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10. Electrical diagrams are for reference only.
11. The fan is suitable for indoor use only.

TOOLS REQUIRED

BEFORE INSTALLATION

Unpack your fan and check the contents. You should have the followings:

INSTALLATION

INSTALL THE FAN

Tools Required:
Phillips Screwdriver, Pair of Pliers, Straight slot screwdriver, Adjustable Wrench, Step Ladder, and Wire Cutters.

INSTALL THE MOUNTING BRACKET
To prevent personal injury and damage, ensure that the hanging location allows the blade clearance of 7 feet (2.13 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.

If there isn’t an existing CUL-listed mounting box, then read the following instructions:

1. For the concrete ceiling: Mark the location for the ceiling fan first, then drill two holes in the ceiling to aid in securing the ceiling bracket with two expansion screws provided and secure the mounting bracket to the building structure with two expansion screws provided, tighten the screws. (Fig.1)
2. For the Wood Ceiling: Mark the location for the ceiling fan first, and secure the mounting bracket to the building structure with four wood screws provided. (Fig.2)
3. Refer to Fig.3 for mounting when the ceiling is angled max. 15-degree angle.

NOTE: Hanger after the installation must be able to withstand the weight of 45 kgs or more

Fix the mounting bracket in the hanging location

Make wiring connections from the house and the motor to the remote receiver as shown right. Connect using wire nuts (provided).

Carefully lift the motor assembly and fix it on the mounting bracket with the locking screw

CCT Dimmable Light Operation

If your ceiling fan is CCT dimmable light, it has 3 light tones, please turn off the light and then turn it on again, the light tone will change.

TROUBLESHOOTING GUIDE

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting guide. If a problem cannot be remedied, please consult with your authorized electrician and please feel free to contact us: [email protected].

• Please contact us and we will help you check and get the problem resolved, you don’t have to uninstall and send it back.

Before:

1. This is an LED ceiling fan, DO NOT install any dimmer switch for this.
2. Install the Remote OR Wall Switch, DO NOT install both of them.
3. Check circuit fuses or breakers and make sure the battery is installed correctly.
4. Check line wire connections to the fan and switch wire connections in the switch housing.

CAUTION: Make sure the main power is off.

Problem: Light does not work

Solution:

1. Check to see that the wire connections in the switch housing are connected.
2. Make wiring connections from the house to the LED light directly (don’t connect the remote and the fan) to determine it’s the issue of the LED light or not.

Problem: The fan will not start

Solution:

1. Check line wire connections to the fan and switch wire connections in the switch housing.
   CAUTION: Make sure the main power is off.

2. Make the Fan wiring connections Without the Remote & transmitter and light, to determine whether it’s an issue with the fan body or not.

   • Please don’t wire the light at the bottom
   • Connect the Ceiling Fan Neutral Wire (White) to the Neutral Wire (White) coming through the ceiling
   • Connect the Ceiling Fan Live Wire (Black) to the Live wire (Black or Colored) coming through the ceiling

Then turn on the main power, and check whether the fan works separately or not.

Problem: Fan & Light do not work/ Remote control malfunction

Solution:
Test the Fan and LED Lights — Without the Remote & transmitter

In most cases, the ceiling fan & light don’t works because of the wrong programming of the Remote Control, please try to connect the wiring without the Remote & transmitter:

Turn off the main power:

• Connect the wiring at the bottom for the LED Light
• Connect the Ceiling Fan Neutral Wire (White) to the Neutral Wire (White) coming through the ceiling
• Connect the Ceiling Fan Live Wire (Black AND Blue wire) to the Live wire (Black or Colored) coming through the ceiling

Then turn on the main power, if the ceiling fan and the light work, it’s the issue of the remote & transmitter issues.

Please feel free to contact us: at [email protected].
www.BellaDepot.com.

© 2020 Bella Depot Inc.
All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>