tp-link 7106511153 Power Supply Module Installation Guide
- June 1, 2024
- tp-link
Table of Contents
tp-link 7106511153 Power Supply Module Installation Guide
Appearance
Remove the Power Supply Module
- Remove the power cord from the external power supply system and the power module.
- Press the Release Handle of the module with one hand, and pull the Power Supply Module Handle using your other hand, until it completely comes out of the chassis.
Install the Power Supply Module
- Press the Release Handle of the module with one hand, and hold the bottom of the module using your other hand. Gently push the module in along the slot guide rail.
- Release the Release Handle to fix the power supply module in place.
Connect the Power Cord and Connect to the Ground
Connect the device to a power outlet using the provided power cord. Meanwhile,
it will connect to the ground via the power supply.
Safety Information
- During the operation, wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well grounded.
- Before installing the power supply module, make sure that the voltage of external power supply system is the same with the voltage marked in the power supply module, and the output voltage of the power supply module is the same with the required voltage of the powered devices in order to prevent damaging the power supply module or the powered devices.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- The equipment must not be used in locations where children are likely to be present.
- Plug the product into the wall outlets with earthing connection through the power supply cord.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of device. Please use this product with care and operate at your own risk
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
For technical support, the user guide and other information, please visit
https://[www.tp link.com](http://www.tp%20link.com)/support/?type=smb, or
simply scan the QR code.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>