EASTOPS SK-06 Prop Burglar Alarm Instruction Manual
- June 1, 2024
- EASTOPS
Table of Contents
EASTOPS SK-06 Prop Burglar Alarm
Product Information
Specifications
- Product Name: SK-06 Prop Burglar Alarm
- RF Working Frequency: 2.4G
- Operating Range: 2.4G
- Operating Voltage: 3V
- Output: 10uA – 20uA
- Standby Time: 2 years
Product Usage Instructions
Installation Instructions
- Separate the Decoder cover from the main body.
- Connect the Decoder cover to the main body.
- Connect the Decoder to the alarm.
Decoder Operation
The Decoder features an on/off button for operation. Press the button as
needed to control the alarm.
Alarm State
When the alarm is in an alarmed state, press the SK-06 button twice to
silence the alarm sound. The system will then enter the normal anti-theft
state.
Manufacturer Information
- D.F.S Technology CO., LTD
- Phone Number: +86 755 27058017 / 29091740
- Fax: +86 755 27058020
- Website: http://www.eastops.com
- Address: Building 3, Block2, 3rd Industrial Zone of Yanchuan, Songgang Town, Shenzhen city, China
- Free Hotline: 400-756-9898
FAQ
-
Q: How do I know when the alarm is activated?
A: The alarm enters the working state when it hears a specific sound. When any connection is removed or loosened, a red light will flash along with a series of alert sounds. -
Q: What is the standby time of the product?
A: The standby time of the SK-06 Prop Burglar Alarm is approximately 2 years.
Prop Burglar Alarm
SK-06
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Portable
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Product accessories list
Instructions installation
The decoder cover is separated from the main body. The decoder cover ia connected to the main body. The decoder is connected to the alarm.
Notice
- After the alarm is energized, it enters the working state when it hears “DI” sound;
- When the connection is removed or any contact is loosened, a red light will flash and “D,D,D,D…” sound will appear after the alarm is detected.
- SK-06 it’s a new security decoder, When the alarm is in alarm state, press the sk-06 button to remove the alarm sound after 2 times of continuous dripping, and then enter the normal anti-theft state.
- The drawing is for reference only, please refer to the product.Please see the installation video for the detailed installation tutorial.
RF Working frequency:
- Operating rang of the product:2.4G
- Operating voltage:3V
- Output:10uA 20uA
- Standby time:2 years
D.F.S Technology CO., LTD
Phone Number: +86 755 27058017 29091740
Fax: +86 755 27058020
Website: http://www.eastops.com
Manufacturer Name:D.F.S Technology CO., LTD
Address:Building 3, Block2, 3rd Industrial Zone of Yanchua n, Songgang Town,
Shenzhen city,China
Free hotline: 400-756-9898