newair NBC085HX00 Prismatic Series Beverage Fridge Owner’s Manual

newair NBC085HX00 Prismatic Series Beverage Fridge Owner’s Manual

SPECIFICATIONS

MODEL NO.: NBC085HX00
VOLTAGE: 110-120V
CURRENT: 1.3A
FREQUENCY: 60Hz
POWER CONSUMPTION: 85W
BOTTLE CAPACITY: 85 cans
STORAGE CAPACITY: 2.5 cu ft
TEMPERATURE RANGE: 37°F – 65°F
REFRIGERANT: R600a
PRODUCT DIMENSIONS: 16.9″W x 18.7″D x 27.2″H

SAFETY INFORMATION & WARNINGS

When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips:

Warning: Risk of Child Entrapment!
Before you throw away your old appliance: Take off the doors. Leave the shelves in place so that children may not easily climb inside. Cut the connection cable as close to the appliance as you can.

ELECTRICAL SAFETY AND CORD HANDLING

• Make sure your outlet voltage and circuit frequency correspond to the voltage stated on the appliance rating label. If this is not the case, contact customer service immediately.
• Do not use any other appliance at the same time on the same electrical circuit as it may overload the circuit and blow the fuse or circuit breaker.
• To protect against fire and electric shock, do not immerse the cord, plug, power base or the beverage fridge body itself in water or other liquid. Do not expose the electrical connections to water.
• Do not kink, bend, squash, strain or damage the power cord and always protect it rom sharp edges and heat.
• Grip the plug when disconnecting; do not pull on the cord.
• Do not pick up or operate the appliance if the power supply cord or plug is damaged. If it is damaged, contact customer service for assistance.
• A damaged cord or plug must be replaced by the manufacturer or a qualifiedelectrician. Do not attempt to replace a damaged cord or plug without proper assistance.
• Make sure all electrical connections are clean and dry before plugging in and using the unit.
• Do not use this appliance in conjunction with an extension cord.
• Unplug the appliance from the power outlet when not in use. You should also unplug the appliance prior to any maintenance, and before cleaning, servicing, or moving it.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.

USAGE CONDITIONS AND RESTRICTIONS

• Before first use, it is advisable to wait at least 24 hours before connecting the appliance to allow the oil to flow back into the compressor.
• This appliance is intended for domestic use only. This product is not intended for commercial use.
• Do not use this appliance outdoors.
• Only use this refrigerator as described in this manual. Any other use is not recommended and may cause fire, electrical shock or injury. EN www.newair.com 6
• Improper installation and the use of accessories not recommended by the appliance manufacturer may result in fire, electrical shock or personal injury, and will void your warranty.
• We assume no responsibility for any damages caused by faulty use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance. Close supervision is necessary when any appliance is used by or near children.
• Do not use chemicals, steel wool or abrasive cleaners to clean any part of the unit, as these could damage or corrode any materials used.
• Do not operate the unit near liquids (kitchen sink, water basins, taps, etc.)
• Ensure that all parts are correctly assembled before operation.
• Maintain the appliance in accordance with the instructions in this manua; to ensure that it functions properly.
• If there is a product malfunction, or if it has been damaged in any way, contact customer service immediately.
• Immediately unplug the appliance if any fire or smoke is detected.
• Place the product on a straight, rigid, and stable surface, away from sources of direct sunlight or excessive heat.
• Do not place the product near heat sources such as radiators, heat registers, stoves or other appliances that produce heat.
• Place the product in a sufficiently aerated location. Ensure that air can circulate freely around the back of the refrigerator. To ensure the best performance, leave about 4 inches of open space on all sides of the fridge.

FLAMMABLE REFRIGERANT GAS WARNINGS

Caution! Risk of fire or explosion. Flammable refrigerant used. Consult this manual or customer service before attempting to service this product. All safety precautions must be followed.

Caution! Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used.

Caution! Risk of fire or explosion due to puncture of refrigerant tubing; follow handing instructions carefully. Flammable refrigerant used.

• The refrigerant used in this unit is obutane (R600a), a gas with a high level of  environmental compatibility, which is flammable. It is contained within the refrigerant circuit of the appliance. Ensure that none of the components of the refrigerant circuit become damaged during transportation and installation of the appliance

Warning: Do not damage the refrigerant circuit and never use an appliance with a damaged refrigerant circuit! If the refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate the room in which the appliance is located.

• The room for installing the appliance must be at least 11 square feet per 0.3oz of refrigerant—roughly 25 square feet for this appliance.

GENERAL SAFETY

Do not use other electrical appliances inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Thoroughly ventilate the room in which the appliance is situated.
• It is dangerous to alter the specifications or modify this product in any way.
• Any damage to the cord may cause a short circuit, fire, and/or electric shock

Warning: This appliance is heavy. Care should be taken when moving it. To avoid back or other injury, consider a two-person lift or mechanical aid when installing it. Failure to do so can result in back or other injury.

• Avoid prolonged exposure to direct sunlight.
• This appliance is intended to be used in households only.

Warn ing: Do not use an extension cord.

• Any electrical components (plug power cord, compressor, etc.) must be replaced by a certified service agent or qualified service personnel.
• Make sure that the power plug is not squashed or damaged by the back of the appliance. A damaged power plug may overheat and cause a fire.
• Adequate air circulation should be allowed around the appliance. Inadequate aircirculation leads to overheating. To achieve sufficient ventilation, follow the installation instructions included in this manual.
• The appliance must not be located close to radiators or stoves.
• Make sure that the main plug is accessible after installing the appliance.

DAILY USE

DAILY USE

• Do not put hot food in the appliance.
• Store pre-packed food in accordance with the food manufacturer’s instructions.

Warning: Do not use mechanical devices or other means to accelerate the defrosting process. Never use sharp or metal instruments to remove frost or clean the appliance.Use a plastic scraper if necessary.

If the refrigerator is unplugged, turned off or has lost power, then wait 3 to 5 minutesbefore restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start

QUICK START GUIDE

UNPACKING THE APPLIANCE

• Before first use, it is advisable to wait at least 24 hours before connecting the appliance to allow the oil to flow back into the compressor.
• This product has been packaged to protect it against transportation damage. Remove all packaging materials from around and inside the appliance but do not remove any foam insulation surrounding the pipes in the rear of the unit.
• Keep the original packaging carton and materials in a safe place, as these materials are helpful in keeping your appliance stored long-term should the need arise. If you dispose of the product packaging, please recycle the materials accordingly.
• Plastic wrapping can be a suffocation hazard for babies and young children, so ensure that all packaging materials are out of their reach and disposed of safely.
• Make sure the refrigerator is disconnected from the power supply before cleaning the interior surfaces and all internal accessories with lukewarm water, a soft cloth, and a mild detergent. This will remove any dust collected in transit and storage and help to remove any factory smells.

Important: Do not use harsh or abrasive detergents or powders as these will damage the finish.

PARTS DIAGRAM

When you receive your unit, carefully remove the exterior and interior packaging. It is recommended that you keep the packaging for future storage use. Check to make sure the following parts are included:

• 3 Shelves (2 full, 1 half)
• 1 Instruction Manual

1. Temperature Controls (Inside)
2. Door Frame
3. Fridge Foot (x4)
4. Door Hinge
5. LED Light
6. Shelf

ASSEMBLY & INSTALLATION

Before connecting the appliance to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

This beverage fridge is a freestanding unit and should not be built into surrounding cabinetry. Allow for proper air clearance around the fridge. The recommended clearances are as follows:

• Sides: 4.5”
• Top: 4″
• Back:4

Before operating your beverage fridge for the first time, follow these steps:

1. Allow the unit to sit upright for 24 hours prior to first use. Upon the first use, allow the unit to sit at the desired temperature for at least 30 minutes before changing settings or filling it with drinks.
2. Clean the interior surface of the unit with warm water and a soft cloth.
3. Handle the unit with care. Do not apply force to any parts, such as the condenser or the door. The metal rails on the bottom of the unit may be sharp, so please use caution when moving the unit. Do not tilt the unit beyond 45 degrees or drag it across the floor.
4. Place the fridge on a level surface that will be strong enough to support the unit when it is fully loaded. To level your fridge, adjust the front feet located at thebottom of the unit. If the unit is not level, the doors and magnetic seal may not work properly. (Please note that placing your fridge on carpet may result in expelled heat fading the carpet.)
5. Install the fridge away from direct sunlight and heat sources such as stoves, heaters, or radiators. Direct sunlight may affect the unit’s acrylic coating, and nearby heat sources can increase electrical consumption. Extreme cold or hot ambient temperatures may also prevent optimal performance.

OPERATING INSTRUCTIONS

TEMPERATURE ADJUSTMENT

1. Thermostat
2. Light Switch
3. Led Light
   

Your beverage fridge can be set to your desired temperature using the thermostat. The unit’s temperature range is 37°F to 65°F.

The temperature scale runs from 1, the warmest setting, to 5, the coldest.

OPTIMIZING PERFORMANCE

• To ensure maximum performance and efficiency, be sure to place your beverage fridge in an area where there is proper air circulation.
• For proper internal air circulation, do not overfill your beverage fridge. When storing beverages, keep them away from the rear wall. To allow free circulation of cold air,\ don’t pack beverages too tightly on the shelves.
• Do not place the unit in direct sunlight.
• Do not place heated beverages in your fridge.
• Do not place heavy objects on top of the beverage fridge.
• Note that the unit will delay restarting for 3-5 minutes after losing power or being unplugged as a safety precaution.

REMOTE CONTROL INSTRUCTIONS

SAFETY AND TROUBLESHOOTING INFORMATION

1. Before you start using the remote or mounting any accessories, make sure to readthe instructions carefully.
2. Make sure that you insert the battery correctly by paying attention to the battery’s positive and negative polarity. If you don’t plan on using the remote for an extended period, remove the battery to prevent it from leaking or damaging the remote.
3. If you notice that the remote’s distance is getting smaller and less sensitive, it could mean that the battery is running out of power. In this case, replace the battery to ensure optimal performance.
4. Be careful not to drop the remote as it could damage the internal components.
5. Use the remote in indoor and dry locations only to avoid damage from moisture or other environmental factors.

SLEEP MODE
When you’re not using the remote, the color wheel will go to sleep after a few seconds and lock itself. To wake it up, just press any button on the remote. This feature helps to make the battery last longer when you’re not actively using the remote

SYNC REMOTE CONTROL WITH FRIDGE
The remote that comes with your fridge is already paired, which means it is ready to use right away after removing the protective film on the battery.

Important: This fridge comes with only one remote, so please be careful not to lose it. In case the remote gets lost, please contact our customer support team.

OPERATING INSTRUCTIONS

SELECT ZONE:
Pick a zone (upper, lower, or both) to control. Once you collect a zone, all functions you choose will only apply to that zone

UPPER ZONE/LOWER ZONE:

• Select the upper zone by pressing UPPER ZONE once. To select the lower zone, press LOWER ZONE once.
• Select both zones by pressing UPPER ZONE then immediately pressing LOWER ZONE.
• Turn off the selected zone by pressing and holding either UPPER ZONE or LOWER ZONE.

FUNCTIONS:
ON/OFF : Press this button turn both zones on or off.
COLOR WHEEL: Touch to choose a color for the selected zone. DYNAMIC MODE

• Press to cycle through the 10 different dynamic modes:
  1. Static color change (red, green, blue)
  2. Dynamic color wave (red, green, blue)
  3. Static color change (full spectrum)
  4. Dynamic color wave (full spectrum)
  5. Dynamic color wave (cyan, purple, yellow)
  6. Color fade (red, green, blue)
  7. Color pulse (red)
  8. Color pulse (blue)
  9. Color pulse (green)
  10. Color pulse (white)
• Press and hold to cycle through all the dynamic modes one by one.
• To cancel dynamic mode, touch the color wheel.

SATURATION:

• Press to fully increase/decrease the saturation of the selected color.
• Press and hold to gradually change the saturation until you have reached your desired level.

COLOR SELECT

• Press to manually scroll through seven main colors. The color will change in the following order: red, yellow, green, cyan, blue, purple, white.
• Press and hold to reset the color back to red.

BRIGHTNESS/SPEED:

• During normal use, use the +/- buttons to adjust the brightness of the selected zone.
• During dynamic mode, use the +/- buttons to adjust the speed of the dynamic mode.

MOUNTING INSTALLATION

This remote comes with a remote holder for convenience. You can mount the remote holder in two different ways:

• Option 1: Use two screws to attach the holder to the wall.
• Option 2: Use adhesive paste to stick the holder to the wall.

CLEANING & MAINTENANCE

CLEANING YOUR FRIDGE
To clean your fridge:

• Unplug the fridge and remove anything inside. Clean accessories with soap and water—do not submerge.
• Wash the inside of the unit with a solution made of warm water and gentle detergent. Do not use abrasive cleaners.
• Use mild, soapy water to clean the unit’s door seal.
• Thoroughly clean the back and bottom of the beverage fridge.
• To clean the outside of the unit, use a mild detergent and warm water. Dust the outside of the unit every 6 months.
• Allow all components to dry completely before returning to regular use.

DEFROSTING YOUR FRIDGE
To prevent ice buildup on the inside of the beverage fridge, it may be necessary to defrost occasionally:

1. Unplug the beverage fridge.
2. Allow frost to melt from the inside of the fridge. If necessary, use a plastic utensil to scrape ice from the interior surface.
3. Dry thoroughly before plugging it in again.
4. Do not allow the unit to defrost while the door is shut and sealed—prop open the door to prevent mildew buildup

GOING AWAY?

• Short vacation: Leave the fridge in operation during vacations of less than a month.
• Long vacation: If you are not going to use the fridge for extended periods, remove everything stored inside and unplug the power cord. Clean and dry the interior thoroughly. To prevent mold growth, leave the door open slightly. (Restrict children’s access to the room with the open fridge to avoid creating a child entrapment risk.)

MOVING THE FRIDGE

• Unplug the fridge and remove everything kept inside. Securely tape down the door and shelves. Turn the leveling feet up to the base to avoid damage.
• CAUTION: Never pick up the refrigerator by the door.
• Protect the outside of the unit with a blanket or similar soft material and make sure the fridge stays secure in the upright position during transportation.

DISPOSAL OF OLD APPLIANCES
Be sure to make any locks unusable, remove any door(s), and dispose of the unit following local guidelines.

**Warning** – Chemical Hazard: Do not allow children to play with

the old
appliance. Contact your local authority for disposal procedures.

• Before disposing of an old appliance, please make sure it is switched off and secured.Unplug the appliance and break any locks in order to prevent children from becoming trapped.
• Please note: Refrigeration system contains gas and refrigerants that requirespecialized waste disposal. Some vulnerable materials in a refrigerator are notdamaged prior to disposal. You can contribute to environmental awareness by insisting on an appropriate non-polluting method of disposal.

DISPOSAL OF PACKAGING
Do not allow children to play with the packaging. Dispose of plastic bags safely.

• The cardboard may be broken down or cut into smaller pieces and recycled. Any wrapping is made of polyethylene. The polyethylene pads and padding can berecycled

TROUBLESHOOTING

circuit breaker and check for a broken fuse.
The beverage fridge is not cold enough.| The external environment may require a higher setting.| Lower the temperature of the fridge.
The fridge may be placed too close to a heat source.| Keep the fridge away from direct sunlight and other heat sources.
There is insufficient ventilation.| Place the beverage fridge in an area with proper ventilation and clearances.
The door is not completely closed, or the door seal is not working properly.| Close the door tightly. Do not open the door frequently, and do not keep the door open for extended periods of time. Replace the seal on the door if necessary
The beverage fridge seems to make too much noise.| The unit is not level.| Adjust the unit’s feet and ensure the product is level.
There is insufficient ventilation. The unit is too close to a wall or another surface.| Allow sufficient clearance around the unit.
An interior red light is flashing.| The temperature is set too low.| Adjust the temperature so that it is higher than the beverage fridge’s interior temperature.
Frost is building up in the unit.| There is excess humidity, or the interior temperature is too low.C| Turn off the beverage fridge, unplug it, and remove the frost buildup manually. Reconnect the power once the ice has thawed.

LIMITED MANUFACTURER’S WARRANTY

This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the  manufacturer.

Warranty Terms:
During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer’s discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs.

Warranty Exclusions:
The warranty will not apply if damage is caused by any of the following:

• Power failure
• Damage in transit or when moving the appliance
• Improper power supply such as low voltage, defective household wiring or inadequate fuses
• Accident, alteration, misuse or abuse of the appliance such as using nonapproved  accessories,inadequate air circulation in the room or abnormal operating conditions (extreme temperatures)
• Use in commercial or industrial applications
• Fire, water damage, theft, war, riot, hostility or natural disasters as hurricanes, floods, etc.
• Use of force or damage caused by external influences
• Partially or completely dismantled appliances
• Excess wear and tear by the user

Obtaining Service:
When making a warranty claim, please have the original bill of purchase with the purchase date available. Once confirmed that your appliance is eligible for warrantyservice, all repairs will be performed by a Newair™ authorized repair facility. Thepurchaser will be responsible for any removal or transportation costs. Replacement parts and/or units will be new, re- manufactured or refurbished and is subject to the manufacturer’s discretion. For technical support and warranty service, please email support@newair.com.

 A Name You Can Trust

Trust should be earned and we will earn yours. Customer happiness is the focus of our business.

From the factory to the warehouse, from the sales floor to your home, the whole  Newair family promises to provide you with innovative products, exceptional service,and support when you need it the most.

Count on Newair
As a proud Newair owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.

Contact Us
Please reach out to our customer service team before making a return to your store of purchase. We are happy to help with any questions or concerns!
Mon-Fri from 8-4 PST at:
Call: 1-855-963-9247
Email: support@newair.com
Online: www.newair.com

A team member will respond to you within 24 hours.
Follow Us

Facebook.com/newairusa
Instagram.com/newairusa
YouTube.com/newairusa
Twitter.com/newairusa

REGISTER YOUR PRODUCT ONLINE

Register Your Newair Product Online Today!
Take advantage of all the benefits product registration has to offer:

Service and Support
Diagnose troubleshooting and service issues faster and more accurately

Recall Notifications
Stay up to date for safety, system updates and recall notifications
Special Promotions
Opt-in for Newair promotions and offer

Registering your product information online is safe & secure and takes less than 2 minutes to complete:
Alternatively, we recommend you attach a copy of your sales receipt below and record the following information, located on the manufacturer’s nameplate on the rear of the unit. You will need this information if it becomes necessary to contact the manufacturer for service inquiries.

Date of Purchase:|
---|---
Serial Number:|
Model Number:|

References

• newair (@newairusa) • Instagram photos and videos
• Product Registration – Newair
• Newair | Best Compact Appliances for the Home, Office & More
• Newair | Best Compact Appliances for the Home, Office & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>