Geekbuying APOWER1000 Portable Power Station User Manual

Geekbuying APOWER1000 Portable Power Station

Apower Product Introduction

1. Safety and Performance Upgrade: The Apower1000 utilizes automotive-grade soft-pack lithium iron phosphate batteries, ensuring higher safety levels, greater power output, and an extended cycle lifespan, providing users with enduring and reliable energy storage.

2. Ultra-High Power Output: The overall output power of the device reaches 2000 watts, meeting the efficient energy needs of various devices, ensuring stable power supply
   in all scenarios.

3. Multiple Intelligent Charging Methods: The Apower1000 supports bidirectional inverted grid fast charging, car charging, and 500-watt solar charging, intelligently meeting energy replenishment needs in various scenarios.

4. Intuitive Smart Display: The device is equipped with a color LCD screen, intuitively showcasing vital information such as remaining battery capacity, remaining time, charge-discharge power, and device status. This provides users with an intelligent energy management experience.

Supported Devices: Rice cookers, mini refrigerators, speakers, televisions, mobile phones, computers, digital cameras, tablets, LED lights, outdoor lighting for emergencies, outdoor power tools, and more.
Application Scenarios: Disaster relief, emergency rescue, outdoor travel, camping, and family charging in various fields.

Important Points

1. Please avoid using this product in high temperature and humid environments to ensure optimal performance and longevity.
2. When not in use for extended periods, please ensure that the product’s battery level is maintained at 60% or higher to safeguard battery health and performance.
3. In case of product issues, please do not attempt to disassemble or repair it yourself. Instead, contact the distributor to arrange for factory repairs. Unauthorized self-repair will void the warranty.
4.  The AC output of the product features a sleep function. If you need to deactivate the AC sleep mode, press the AC button three times to make the AC indicator icon flash and enter continuous output mode.

Product Visuals

Note: The product visuals are for APOWER1000.

LED Display Screen
The LCD display screen shows the charging and discharging status of the product. When you use the product, corresponding icons will light up on the LCD display screen.

the current remaining charging/discharging time of the product
2| Indicates the current Input power of the product| 9| Indicates the total output power of the product
3| lndicatu the product’  Bluetooth and WiFi icons| 10| Indicates the product’ TYPE-C icon
4| Indicates the produc:t’s fan Icon| 11| Indicates the product’  DC Icon
5| Indicates the product’s overload protection icon| 12| Indicates the product’ LED lighting icon
6| lndicatu the product’s high-temperature warning icon| 13| Indicates the product’s USB icon
7| Indicates the product’s low-temperature warning icon| 14| Indicates the product’s icon

Product Specifications

Product

Dimensions

| 447’234.219mm| 4s3•295•29smm
Net Weight| 13.5kg| 25.5kg
Battery| LFP Soft-pack Battery System| LFP Soft-pack Battery System
Capacity| 320000mAh| 640000mAh
Cycle Lifespan| 3000 Cycles >80%

AC Output

| 1800W(220V) 2600W(220V)
1600W(110V) 2400W(110V)

DC Output

| DC552s•2: 12V18N 200W max (shared output with cigarette lighter)
Cigarette Lighter: 12V18N 200W max (shared output with DC5525)

USB Output

| TYPE-C1:100W
TYPE-C2:22.5W
USB•4:5V3N 9V2N12V1.SA
AC Charging| 1000W| 1000W
Car Charging| 12V8A 100W| 12V8A 100W
Solar Panel Charging| ****

500W

| ****

600W

UPS| Switching time between mains power and battery: <20ms

Operating Temperature

| ****

Charging Temperature: 0°C- 45°C (32°F- 113°F)

Discharging Temperature: -10°C- S0°C (-4°F- 122°F)

Code Fault Explanations

How to Troubleshoot Code Faults

or other possible causes of communication failure.

Er02| Check the communication line connection between the inverter and the panel, or other possible causes of communication failure.
Er03| Wait for the BMS high-temperature condition to be resolved or discharge to remove the overcharge protection.
Er04| Wait for the BMS low-temperature condition to be resolved.
Er05| Recharge to replenish energy or investigate inverter hardware issues.
Er06| Discharge or investigate MPPT input voltage and inverter hardware issues.
Er07| Wait for cooling down and then restart, or investigate inverter hardware issues.
Er08| Eliminate hardware faults and reboot.

Product Operation Instructions

How to Charge the Machine Using Mains Power

1. Step 1: Plug the power cord into the mains socket.
2. Step 2: Insert the power cord’s pronged plug into the machine’s power port.

Note: The machine features a BMS charging protection system. Charging should be done normally; it will automatically stop charging when fully charged to prevent other unexpected events. It is recommended to disconnect the power promptly after the product is fully charged to avoid any other unforeseen situations.

How to Charge the Mach·ne Using Solar Power

1. Step 1: Unfold the solar panel and position it at a 45-degree angle toward the sun.
2. Step 2: Insert the port of the unfolded solar panel into the XT 60 interface on the front of the product.

Note: The power output of the solar panel is influenced by sunlight. If there is obstruction, it will affect the efficiency of solar conversion and result in dynamic changes in remaining time. This is a normal phenomenon.

How to Use Car Charging

1. Step 1: Start the vehicle.
2. Step 2: Insert the car charger cable into the car’s cigarette lighter socket.
   Note: Insert the XT60 power cable plug into the XT60 interface on the front of the machine.

.Product Function Explanation

Note: If the output is suddenly interrupted, first check if peripheral electrical devices have excessive power consumption or a short circuit. Then restart the machine and verify if its functions are normal.

Operations

1. Step 1: Main Switch Button

2. Step 2: Short press 1.5 seconds to turn on/off

3. Step 3: Long press 3 seconds to shut down 1  the entire power system (Serial Number 1

4. Step 1: AC Switch Button

5. Step 2: Short press 1.5 seconds to turn on/off

6. Step 3: Long press 3 seconds to turn on AC, screen icon lights up for output (Serial Number 2

Operations

1. Step 1: USB Switch Button
2. Step 2: Short press 1.5 seconds to turn on/off
3. Step 3: Single-click the USB button to activate, TYPE-C and USB icons light up simultaneously for output (Serial Number 3)
4. Step 1: DC Switch Butto
5. Step 2: Short press 1.5 seconds to turn on/of
6. Step 3: Single click DC button to activate,

DC icon lights up for output (Serial Number 1

Sleep Mode

1. Press the AC button 3 times for ON/OFF (Cancel auto-shutdown when the AC icon is flashing).
2. Press and hold the AC button for about 2 seconds for ON/OFF (Automatic shutdown after light load for 30 minutes).

Package Contents

Warranty Card

This product provides warranty services for months from the date of customer purchase.

Coverage Conditions:
When requiring warranty service, please present this warranty card and provide detailed information.
Our company provides a warranty period of months from the date of product purchase.

Warranty Scope:

1. Product quality issues that occur under normal use.
2. Damage caused by operational errors is not covered under warranty.
3.  Warranty is not provided after self-disassembly.
4.  Machines with torn labels will not be covered under warranty.
   Products located outside the warranty scope can still receive repair services from our company. However, the cost of repairs shall be borne by the customer.

This product is insured by China People’s Property Insurance Co., Ltd. Policy No.: [Policy Number] PZAl202344030000000182

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>