JBL iF Design Soundgear Frames Installation Guide

June 1, 2024
JBL

JBL-logo

JBL iF Design Soundgear Frames

JBL-iF-Design-Soundgear-Frames-product

WHAT’S IN THE BOX

JBL-iF-Design-Soundgear-Frames-fig-1

APP

JBL-iF-Design-Soundgear-Frames-fig-2

HOW TO WEAR

JBL-iF-Design-Soundgear-Frames-fig-3

POWER, CONNECT & CONTROLS

POWER ON & CONNECT

JBL-iF-Design-Soundgear-Frames-fig-4

CONTROLS

JBL-iF-Design-Soundgear-Frames-fig-5

  • Enable advance controls by connecting your JBL SOUNDGEAR FRAMES to JBL Headphones app .

POWER OFF

JBL-iF-Design-Soundgear-Frames-fig-6

MANUAL SETUP

Connect to a new Bluetooth device

Factory Reset

DO MORE WITH THE APP

JBL-iF-Design-Soundgear-Frames-fig-9

CHARGING

JBL-iF-Design-Soundgear-Frames-fig-10

LED BEHAVIORS

JBL-iF-Design-Soundgear-Frames-fig-11

TECH SPEC

IP54

  • Model: SOUNDGEAR FRAMES
  • Driver size: 25 mm x 9 mm/ 0.98″ x 0.35″ Dynamic Driver
  • Power supply: 5 V 0.5 A x 2
  • Material: Frame-Plastic (TR90), Hinge-metal (SUS316), Temple housing- Plastic (PC)
  • Dimensions (L x W x H): 160.87 mm x 150.54 mm x 53.68 mm/ 6.33″ x 5.93″ x 2.11″
  • Weight: 52.0 g/ 0.115 lbs
  • Battery type: Lithium-ion battery (110 mAh/ 3.8 V)
  • Charging time: 2 hrs from empty
  • Frequency response: 100 Hz – 18 kHz
  • Impedance: 20 ohm
  • Sensitivity: 114 dB SPL@1 kHz
  • Maximum SPL: 90 dB
  • Microphone sensitivity: -38 dBV/Pa@1 kHz
  • Bluetooth version: 5.2
  • Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
  • Bluetooth transmitter power: <12 dBm (EIRP)
  • Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
  • Maximum operation temperature: 45 °C

Warning

  • To protect battery lifespan, fully charge at least once every 3 months.
  • Battery life will vary due to usage patterns and environmental conditions.

Warning

  • DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY
  • DO NOT SHORT CIRCUIT
  • MAY EXPLODE IF DISPOSED OF IN FIRE
  • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
  • DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Description

Description: Sunglasses for general use

Filter Category: CAT.3
High protection against sunglare, Good UV protection

  • NOT SUITABLE FOR DRIVING IN TWILIGHT OR AT NIGHT.
  • Only lenses approved by Harman should be used with the Audio Frame products.
  • Not for direct observation of the sun.
  • Not for protection against artificial light sources, e.g. solaria.
  • Not for use as eye protection against mechanical impact hazards.
  • When not in use, store the product in the carry case provided.

This product complies with the requirements of European Union PPE Regulation (EU) 2016/ 425.
This product complies with the EN ISO 12312-1:2013+A1:2015, BS EN ISO 12312-1:2013+A1:2015, AS/NZS 1067.1:2016, GB 39552.1-2020, ABNT NBR ISO 12312-1:2018 and CNS 15067 -2017.
Instructions for storage, use and cleaning: Store in such a way as to prevent scratching of the lenses.
Clean lenses with soapy water and dry with a soft cloth.

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Product specifications and app screens are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals