LUPWNEKA Small Black Floating Wall Shelf Instruction Manual
- June 1, 2024
- LUPWNEKA
Table of Contents
LUPWNEKA Small Black Floating Wall Shelf
ASSEMBLY INSTRUCTION
This document provides instructions for assembling a shelf, including a visual representation of the components and the installation steps.
Components
The illustration shows two floating shelves and a set of hardware required for assembly. There are six wall anchors and six screws included.
Installation Steps
The installation process is visually detailed in a series of steps.
Measuring and Marking
- Measure the distance with a ruler. An illustration shows a ruler being used to measure the space between two points on a wall.
- Mark the location where you want to install the shelf. The illustration depicts a pencil marking the wall at the measured points.
Securing the Shelf
- Drill the holes. A power drill is shown making holes at the marked points on the wall.
- Punch the expansion nails. The illustration shows a hammer driving wall anchors into the drilled holes.
- Punch the screws. A screwdriver is depicted securing the screws into the wall anchors.
- Hang the shelf. The final illustration shows the shelf being placed onto the mounted screws on the wall.
Specifications
Component | Quantity |
---|---|
Floating Shelves | 2 |
Wall Anchors | 6 |
Screws | 6 |
FAQ
-
What tools will I need to install the shelf?|
You will need a ruler, pencil, power drill, hammer, and screwdriver for installation. -
Can the shelf be installed on any wall?
It is recommended to install the shelf on a sturdy wall capable of supporting the weight. For drywall, use the provided wall anchors. -
How do I ensure the shelf is level?
Use the ruler or a level to ensure the shelf is horizontal before marking the wall and drilling holes. -
What should I do if the screws do not fit into the wall anchors?
-
Make sure you have drilled the holes to the correct depth and the wall anchors are fully inserted. If the issue persists, check if the screws and anchors are compatible.