Philips BGP293 LED149-4S LumiStreet gen2 Light Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
Philips BGP293 LED149-4S LumiStreet gen2 Light
Specifications:
- Lamp Family Code: LumiStreet gen2
- Light Source: LED module 14900 lm
- Color Temperature: 740 neutral white
- Safety Class: I
- Distribution: Extra wide 10
- Side-entry Diameter: 76 mm
- Input Voltage: 220 to 240 V
- Power Consumption: 84 W
- Housing Material: Aluminum die cast
- Ingress Protection Code: IP66 (Dust penetration-protected, jet-proof)
- Mech. Impact Protection Code: IK08 (5 J vandal-protected)
- Luminous Flux Tolerance: +/-7%
Product Usage Instructions
Installation
- Ensure the power supply is switched off before installation.
- Mount the luminaire securely on a normally flammable surface using the provided mounting device.
- Connect the luminaire to a 5-pole push-in connector.
Controls and Dimming
The luminaire does not support dimming. It operates at a constant light
output without the need for additional control interfaces.
Maintenance
To maintain optimal performance, regularly clean the optical cover and
ensure there is no obstruction to the light source.
Frequently Asked Questions (FAQ):
-
Q: Can the LED module be replaced?
A: Yes, the LED module in this luminaire is replaceable. -
Q: Is the luminaire suitable for outdoor use?
A: Yes, this luminaire is designed for outdoor use with an IP66 rating for dust and water resistance. -
Q: What is the warranty period for this product?
A: The warranty period is 5 years from the date of purchase.
LumiStreet gen2
BGP293 LED149-4S/740 I DX10 76S
- LumiStreet gen2 Medium, LED module 14900 lm, 740 neutral white, Safety class I, Distribution extra wide 10, Side-entry for diameter 76 mm
- Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
General Information
- Lamp family code LED149 [LED module 14900 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Remarks * At extreme ambient temperatures the luminaire might automatically dim down to protect components
- Light source engine type LED
- Service tag Yes
- Product family code BGP293 [LumiStreet gen2 Medium]
- Lighting Technology LED
- Value ladder Specification
- CE mark Yes
- Warranty period 5 years
- Flammability mark For mounting on normally flammable surfaces
- ENEC mark ENEC plus mark
- EU RoHS compliant Yes
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and
- mechanical parts
Light Technical
- Upward light output ratio 0
- Luminous Flux 12,900 lm
- Standard tilt angle posttop 0°
- Standard tilt angle side entry 0°
- Correlated Color Temperature (Nom) 4000 K
- Luminous Efficacy (rated) (Nom) 154 lm/W
- Color rendering index (CRI) 70
- Light source color 740 neutral white
- Optical cover type Flat glass
- Luminaire light beam spread 150° – 43° x 67°
- Optic type outdoor Distribution extra wide 10
Operating and Electrical
- Input Voltage 220 to 240 V
- Line Frequency 50 to 60 Hz
- Inrush current 53 A
- Inrush time 0.3 ms
- Power Consumption 84 W
- Power Factor (Fraction) 0.99
- Connection 2 Push-in connector 5-pole
- Cable – Number of products on MCB of 16 A type B 10
Temperature
Ambient temperature range -40 to +50 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating
- Control interface –
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum die cast
- Reflector material Polycarbonate
- Optic material Polymethyl methacrylate
- Optical cover material Glass
- Fixation material Aluminum
- Housing Color Gray
- Mounting device Side-entry for diameter 76 mm
- Optical cover shape Flat
- Optical cover finish Clear
- Overall length 626 mm
- Overall width 340 mm
- Overall height 95 mm
- Effective projected area 0.0246 m²
- Dimensions (Height x Width x Depth) 95 x 340 x 626 mm
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK08 [5 J vandal-protected]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class I
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.381, 0.379) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful life 100000 h 10 %
- Lumen maintenance at median useful life* 100000 h L96
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level 0% (digital)
Product Data
- Order product name BGP293 LED149-4S/740 I DX10 76S
- Full product name BGP293 LED149-4S/740 I DX10 76S
- Full product code 871951410020600
- Order code 910925866755
- Material Nr. (12NC) 910925866755
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8719514100206
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514100206
LumiStreet gen2
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 14 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>